13810-02-1Relevant articles and documents
P(III)-Assisted Electrochemical Access to Ureas via in situ Generation of Isocyanates from Hydroxamic Acids
Meng, Haiwen,Sun, Kunhui,Xu, Zhimin,Tian, Lifang,Wang, Yahui
supporting information, p. 1768 - 1772 (2021/03/26)
An external oxidant-free protocol for the generation of isocyanates from hydroxamic acids assisted by trivalent phosphine under mild electrochemical conditions was reported. The process started with the anodic oxidation of hydroxamic acids, followed by reacting with phosphine to form corresponding alkoxyphosphoniums and subsequent rearrangement with the release of tri-substituted phosphine oxide as the driving force to give isocyanates, which were trapped by N-based nucleophiles to produce various ureas. This method provides a broadly applicable procedure to access isocyanate intermediates under mild electrochemical conditions.
Rhodium(III)-Catalyzed Aldehyde C?H Activation and Functionalization with Dioxazolones: An Entry to Imide Synthesis
Bellière-Baca, Virginie,Clavier, Hervé,Hérault, Damien,Massouh, Joe,Petrelli, Antoine
supporting information, (2022/01/06)
A rhodium(III)-based catalytic system has been used to develop a C?H bond activation of benzaldehyde derivatives and subsequent functionalization with dioxazolones in order to afford imides. The importance of the nature of the directing group to perform selectively the aldehydic C?H bond activation has been highlighted. The scope investigation showed that this transformation could be applied to various dioxazolones and many benzaldehyde derivatives as well as an acrolein derivative. Derivatization reactions of the imide products demonstrated the synthetic utility of this rhodium-catalyzed aldehydic C?H amidation.
Synthesis of sulfimides and N-Allyl-N-(thio)amides by Ru(II)catalyzed nitrene transfer reactions of N-acyloxyamides
Zhang, Xinyu,Lin, Bo,Chen, Jianhui,Chen, Jiajia,Luo, Yanshu,Xia, Yuanzhi
supporting information, p. 819 - 825 (2021/02/01)
The N-acyloxyamides were employed as effective N-acyl nitrene precursors in reactions with thioethers under the catalysis of a commercially available Ru(II) complex, from which a variety of sulfimides were synthesized efficiently and mildly. If an allyl group is contained in the thioether precursor, the [2,3]-sigmatropic rearrangement of the sulfimide occurs simultaneously and the N-allyl-N-(thio)amides were obtained as the final products. Preliminary mechanistic studies indicated that the Ru-nitrenoid species should be a key intermediate in the transformation.
Palladium-catalyzed cascade decarboxylative amination/6- endo-dig benzannulation of o-alkynylarylketones with n-hydroxyamides to access diverse 1-naphthylamine derivatives
Zuo, Youpeng,He, Xinwei,Tang, Qiang,Hu, Wangcheng,Zhou, Tongtong,Shang, Yongjia
supporting information, p. 3890 - 3894 (2020/05/18)
An efficient and practical one-pot strategy to produce highly substituted 1-naphthylamines via sequential palladium-catalyzed decarboxylative amination/intramolecular 6-endo-dig benzannulation reactions has been described. In this reaction, a broad range of electron-rich, electron-neutral, and electron-deficient o-alkynylarylketones react well with N-hydroxyl aryl/alkylamides to give a diversity of 1-naphthylamines in good to excellent yields under mild reaction conditions. The gram-scale synthesis, with benefits such as undiminished product yield and easy transformation, illustrated the practicality of this method.
Co(III)-Catalyzed C-H Amidation of Nitrogen-Containing Heterocycles with Dioxazolones under Mild Conditions
Dhiman, Ankit Kumar,Thakur, Ankita,Kumar, Inder,Kumar, Rakesh,Sharma, Upendra
, p. 9244 - 9254 (2020/08/14)
A cobalt(III)-catalyzed C-8 selective C-H amidation of quinoline N-oxide using dioxazolone as an amidating reagent under mild conditions is disclosed. The reaction proceeds efficiently with excellent functional group compatibility. The utility of the current method is demonstrated by gram scale synthesis of C-8 amide quinoline N-oxide and by converting this amidated product into functionalized quinolines. Furthermore, the developed catalytic method is also applicable for C-7 amidation of N-pyrimidylindolines and ortho-amidation of benzamides.
Synthetic method of hydroxamic acid collector
-
Paragraph 0049-0055, (2020/07/08)
The invention relates to the technical field of collector synthesis, and particularly provides a synthesis method of a hydroxamic acid collector. The synthesis method of the hydroxamic acid collectorcomprises the following steps: premixing reactant ester and a double-ring phase transfer catalyst DBU, adding the formed mixture into a hydroxylamine salt aqueous solution, reacting under the action of alkali, and adding concentrated sulfuric acid for acidolysis after the reaction is finished, thereby obtaining the hydroxamic acid collector. The synthesis method provided by the invention can significantly improve the reaction conversion rate, and has the advantages of mild reaction conditions, environmental protection, safety, simple post-treatment and less waste generation.
Efficient Copper-Catalyzed Multicomponent Synthesis of N-Acyl Amidines via Acyl Nitrenes
Van Vliet, Kaj M.,Polak, Lara H.,Siegler, Maxime A.,Van Der Vlugt, Jarl Ivar,Guerra, Célia Fonseca,De Bruin, Bas
, p. 15240 - 15249 (2019/10/19)
Direct synthetic routes to amidines are desired, as they are widely present in many biologically active compounds and organometallic complexes. N-Acyl amidines in particular can be used as a starting material for the synthesis of heterocycles and have several other applications. Here, we describe a fast and practical copper-catalyzed three-component reaction of aryl acetylenes, amines, and easily accessible 1,4,2-dioxazol-5-ones to N-acyl amidines, generating CO2 as the only byproduct. Transformation of the dioxazolones on the Cu catalyst generates acyl nitrenes that rapidly insert into the copper acetylide Cu-C bond rather than undergoing an undesired Curtius rearrangement. For nonaromatic dioxazolones, [Cu(OAc)(Xantphos)] is a superior catalyst for this transformation, leading to full substrate conversion within 10 min. For the direct synthesis of N-benzoyl amidine derivatives from aromatic dioxazolones, [Cu(OAc)(Xantphos)] proved to be inactive, but moderate to good yields were obtained when using simple copper(I) iodide (CuI) as the catalyst. Mechanistic studies revealed the aerobic instability of one of the intermediates at low catalyst loadings, but the reaction could still be performed in air for most substrates when using catalyst loadings of 5 mol %. The herein reported procedure not only provides a new, practical, and direct route to N-acyl amidines but also represents a new type of C-N bond formation.
Method for synthesizing hydroximic acid compound
-
Paragraph 0087; 0088, (2019/06/13)
The invention discloses a method for synthesizing a hydroximic acid compound. The method comprises the step of subjecting an organic carboxylic acid compound with a structure represented by a formula(I) shown in the description and a hydroxylamine compound with a structure represented by a formula (II) shown in the description to a grinding reaction in the presence of a coupling reagent, therebypreparing the hydroximic acid compound with a structure represented by a formula (III) shown in the description. According to the method, the technical problems that a large amount of organic solventis used, the reaction temperature is high, wastes are plenty, the aftertreatment is complicated, environmental protection is adverse and the like are solved, and the method has the advantages that thesource of the raw materials is wide, the cost is low, the operation is simple, the efficiency is high, the product is easy to separate, the yield is high, industrial production is easy to achieve andthe like.
Synthesis of 2,5-disubstituted oxazoles: Via cobalt(III)-catalyzed cross-coupling of N -pivaloyloxyamides and alkynes
Yu, Xiaolong,Chen, Kehao,Wang, Qi,Zhang, Wenjing,Zhu, Jin
supporting information, p. 1197 - 1200 (2018/02/09)
An efficient synthesis of 2,5-disubstituted oxazoles via Co(iii) catalysis is described herein. The synthesis is achieved under mild conditions through [3+2] cycloaddition of N-pivaloyloxyamides and alkynes. The reaction operates through an internal oxidation pathway and features a very broad substrate scope. The one-step synthesis of natural products such as texamine and balsoxin has been demonstrated via this protocol.
Tf2NH-Catalyzed Formal [3 + 2] Cycloaddition of Ynamides with Dioxazoles: A Metal-Free Approach to Polysubstituted 4-Aminooxazoles
Zhao, Yingying,Hu, Yancheng,Wang, Chunxiang,Li, Xincheng,Wan, Boshun
, p. 3935 - 3942 (2017/04/11)
An unprecedented Tf2NH-catalyzed formal [3 + 2] cycloaddition of ynamides with dioxazoles was developed to construct various polysubstituted 4-aminooxazoles. This approach features a metal-free catalytic bimolecular assembly of oxazole motifs, a low-cost catalyst, exceptionally mild reaction conditions, a very short reaction time, a broad substrate scope, and high efficiency. This metal-free protocol may find applications in pharmaceutical-oriented synthesis.
