23600-89-7

Upstream product

• 106-38-7 para-bromotoluene 
• 99-92-3 p-aminobenzophenone 
• 99-90-1 para-bromoacetophenone 
• 106-49-0 p-toluidine 
• 99-91-2 para-chloroacetophenone 
• 106-43-4 para-chlorotoluene 
• 624-31-7 4-tolyl iodide 
• 1198184-14-3 C₁₁H₁₀N₂O₄S 
• 66117-64-4 di(p-tolyl)borinic acid 
• 67014-02-2 4-acetylbenzamide 
• 100-19-6 (4-nitrophenyl)ethanone 
• 78-32-0 tri-p-cresyl phosphate 
• 13329-40-3 4-Iodoacetophenone 
• 109613-00-5 4-acetophenyl triflate 

Relevant academic research and scientific papers

A novel and unusual method for C[sbnd]N bond formation between benzene ring and various amines

A new approach to form C[sbnd]N bond without metal catalysis was developed. 4-acetylbenzoyl isocyanate reacted with various amines through a mild method to form C[sbnd]N bond. This reaction was amenable to scale-up and it afforded the corresponding products with good to excellent yields and tolerates a wide range of functional groups.

Sodium Butylated Hydroxytoluene: A Functional Group Tolerant, Eco-Friendly Base for Solvent-Free, Pd-Catalysed Amination

NaBHT (sodium 2,6-di-tert-butyl-4-methylphenolate), a strong, but hindered and lipophilic base, has been effectively paired with similarly lipophilic, high-reactivity Pd-NHC (N-heterocyclic carbene) catalysts to produce an ideal combination for performing

Well-Designed N-Heterocyclic Carbene Ligands for Palladium-Catalyzed Denitrative C-N Coupling of Nitroarenes with Amines

The C-N bond formation is one of the fundamental reactions in organic chemistry, because of the widespread presence of amine moieties in pharmaceuticals and biologically active compounds. Palladium-catalyzed C-N coupling of haloarenes represents one of the most efficient approaches to aromatic amines. Nitroarenes are ideal alternative electrophilic coupling partners, since they are inexpensive and readily available. The denitration and cross-coupling using nitroarenes as the electrophilic partners is challenging, because of the low reactivity of the Ar-NO2 bond toward oxidative addition. We report here the C-N coupling of nitroarenes and amines using palladium/5-(2,4,6-triisopropylphenyl)imidazolylidene[1,5-a]pyridines as the catalyst. The ligands are readily available from commercial chemicals. The reaction shows broad substrate scope and functional group tolerance. The method is applicable to both aromatic and aliphatic amines, and many secondary and tertiary aromatic amines bearing various functional groups were obtained in high yields.

Method for catalyzing nitro-arene and amine compound to be synthesized into aromatic amine compounds through palladium/imidazolium salt

The invention discloses a method for catalyzing nitro-arene and an amine compound to be synthesized into aromatic amine through palladium/imidazolium salt. The method comprises the steps that in an organic solvent, the palladium/imidazolium salt is taken as a catalyst, the nitro-arene and the amine compound are subjected to a coupling reaction under the function of alkali, and then the aromatic amine compounds are obtained through aftertreatment. The method is simple in ligand synthesis, storage is facilitated, the price is low, the use quantity of ligands is low, the yield of the product is high, and the substrates have high applicability and are suitable for preparing diarylamine and N-alkylated arylamine. The method can be used for synthesizing a series of aromatic amine compounds, andthe aromatic amine compounds have high application value in the fields of pesticides, medicines, materials and the like.

Palladium-catalyzed c(sp2)-n bond cross-coupling with triaryl phosphates

The first general palladium-catalyzed amination of aryl phosphates is described. The combination of MorDalPhos with [Pd(-cinnamyl)Cl]2 enables the amination of electron-rich, electron-neutral, and electron-poor aryl phosphates with a board range of aromatic, aliphatic, and heterocyclic amines. Common functional groups such as ether, keto, ester, and nitrile show an excellent compatibility in this reaction condition. The solvent-free amination reactions are also successful in both solid coupling partners. The gram-scale cross-coupling is achieved by this catalytic system.

Palladium-Catalyzed C(sp2)-N Bond Cross-Coupling with Triaryl Phosphates

The first general palladium-catalyzed amination of aryl phosphates is described. The combination of MorDalPhos with [Pd(?-cinnamyl)Cl]2 enables the amination of electron-rich, electron-neutral, and electron-poor aryl phosphates with a board range of aromatic, aliphatic, and heterocyclic amines. Common functional groups such as ether, keto, ester, and nitrile show an excellent compatibility in this reaction condition. The solvent-free amination reactions are also successful in both solid coupling partners. The gram-scale cross-coupling is achieved by this catalytic system.

A group of diphosphine-thiosemicarbazone complexes of palladium: Efficient precursors for catalytic C–C and C–N coupling reactions

Reaction of 4-R-benzaldehyde thiosemicarbazone (denoted in general as HL-R; where H stands for the dissociable acidic proton and R (R = OCH3, CH3, H, Cl and NO2) for the substituent) with [Pd(dppe)(EtOH)2]2+, generated in situ via interaction of [Pd(dppe)Cl2] (dppe = 1,2-bis(diphenylphosphino)ethane) with AgNO3 in hot ethanol, in the presence of triethylamine affords a group of orange complexes of the type [Pd(dppe)(L-R)]NO3. Structures of [Pd(dppe)Cl2] and [Pd(dppe)(L-OCH3)]NO3 have been determined by X-ray crystallography. In the [Pd(dppe)(L-R)]NO3 complexes, the thiosemicarbazone ligands are coordinated to the metal center as monoanionic bidentate N,S-donors forming five-membered chelate rings. The [Pd(dppe)(L-R)]NO3 complexes show intense absorptions in the visible and ultraviolet regions, which have been analyzed by TDDFT calculations. All the [Pd(dppe)(L-R)]NO3 complexes are found to efficiently catalyze Suzuki-type C–C and Buchwald-type C–N coupling reactions.

Ligand-Enabled Gold-Catalyzed C(sp2)-N Cross-Coupling Reactions of Aryl Iodides with Amines

The first example of ancillary (P,N)-ligand-enabled gold-catalyzed C-N cross-coupling reactions of aryl iodides with amines is reported. The high generality of the reaction in de novo synthesis, late-stage modifications, and cascade processes to access functionalized indolinones and carbazoles underscores the synthetic potential of the presented strategy. Monitoring the reaction with ESI-HRMS and NMR provided strong evidence for the in situ formation of putative high valent Au(III) intermediates.

Au(i)/Au(iii)-Catalyzed C-N coupling

Cycling between Au(i) and Au(iii) is challenging, so gold-catalyzed cross-couplings are rare. The (MeDalphos)AuCl complex, which we showed was prone to undergo oxidative addition, is reported here to efficiently catalyze the C-N coupling of aryl iodides and amines. The transformation does not require an external oxidant or a directing group. It is robust and works with a wide scope of aryl iodides and N-nucleophiles under mild conditions. Mechanistic studies, including the NMR and MS characterization of a key aryl amido Au(iii) complex, strongly support a 2e redox cycle in which oxidative addition precedes transmetalation and reductive elimination is the rate-determining step.

Base-assisted, copper-catalyzed N-arylation of (benz)imidazoles and amines with diarylborinic acids

N-Arylation of (benz)imidazoles and amines with diarylborinic acids as cost-effective aryl source has been efficiently effected via Cu(OAc)2-catalyzed Chan-Lam coupling in assistance of tetramethylethylenediamine (TMEDA) in methanol and pyridine (Py) in dichloromethane, respectively, in air at room temperature. The diarylborinic acids could be well accommodated by the Chan-Lam coupling oxidative conditions containing a proper combination of bases and solvents. The steric hindrance appeared to affect the copper-catalyzed N-arylation using the high-order arylboron reagent more significantly than the electronic factors, especially for low reactive anilines and aliphatic amines.