269410-03-9Relevant articles and documents
Identification and optimization of biphenyl derivatives as novel tubulin inhibitors targeting colchicine-binding site overcoming multidrug resistance
Cheng, Bao,Zhu, Guirong,Meng, Linghua,Wu, Guolin,Chen, Qin,Ma, Shengming
, (2021/11/22)
Microtubule targeting agents (MTAs) are among the most successful chemotherapeutic drugs, but their efficacy is often limited by the development of multidrug resistance (MDR). Therefore, the development of novel MTAs with the ability to overcome MDR is urgently needed. In this contribution, through modification of the unsymmetric biaryl compounds, we discovered a novel compound dxy-1-175 with potent anti-proliferative activity against cancer cells. Mechanistic study revealed that dxy-1-175 inhibited tubulin polymerization by interacting with the colchicine-binding site of tubulin, which caused cell cycle arrest at G2/M phase. Based on the predicted binding model of dxy-1-175 with tubulin, a series of new 4-benzoylbiphenyl analogues were designed and synthesized. Among them, the hydrochloride compound 12e with improved solubility and good stability in human liver microsome, exhibited the most potent anti-proliferative activity with IC50 value in the low nanomolar range, and markedly inhibited the growth of breast cancer 4T1 xenograft in vivo. Notably, 12e effectively overcame P-gp-mediated MDR and our preliminary data suggested that 12e may not be a substrate of P-glycoprotein (P-gp). Taken together, our study reveals a novel MTA 12e targeting the colchicine-binding site with potent anticancer activity and the ability to circumvent MDR.
Recyclable Pd2dba3/XPhos/PEG-2000 System for Efficient Borylation of Aryl Chlorides: Practical Access to Aryl Boronates
Cai, Mingzhong,Huang, Bin,Luo, Chengkai,Xu, Caifeng
, (2021/12/02)
Pd2dba3/XPhos in poly(ethylene glycol) (PEG-2000) is shown to be a highly stable and efficient catalyst for the borylation of aryl chlorides with bis(pinacolato)diboron. The borylation reaction proceeds smoothly at 110 °C, delivering a wide variety of aryl boronates in good to excellent yields with high functional group tolerance. The crude products were easily isolated via simple extraction of the reaction mixture with cyclohexane. Moreover, both expensive Pd2dba3 and XPhos in PEG-2000 system could be readily recycled and reused more than six times without loss of catalytic efficiency.
Activation of Aryl Carboxylic Acids by Diboron Reagents towards Nickel-Catalyzed Direct Decarbonylative Borylation
Deng, Xi,Guo, Jiandong,Su, Weiping,Wang, Xiaotai,Zhang, Xiaofeng
supporting information, p. 24510 - 24518 (2021/08/12)
The Ni-catalyzed decarbonylative borylation of (hetero)aryl carboxylic acids with B2cat2 has been achieved without recourse to any additives. This Ni-catalyzed method exhibits a broad substrate scope covering poorly reactive non-ortho-substituted (hetero)aryl carboxylic acids, and tolerates diverse functional groups including some of the groups active to Ni0 catalysts. The key to achieve this decarbonylative borylation reaction is the choice of B2cat2 as a coupling partner that not only acts as a borylating reagent, but also chemoselectively activates aryl carboxylic acids towards oxidative addition of their C(acyl)?O bond to Ni0 catalyst via the formation of acyloxyboron compounds. A combination of experimental and computational studies reveals a detailed plausible mechanism for this reaction system, which involves a hitherto unknown concerted decarbonylation and reductive elimination step that generates the aryl boronic ester product. This mode of boron-promoted carboxylic acid activation is also applicable to other types of reactions.
Light- and Manganese-Initiated Borylation of Aryl Diazonium Salts: Mechanistic Insight on the Ultrafast Time-Scale Revealed by Time-Resolved Spectroscopic Analysis
Firth, James D.,Hammarback, L. Anders,Burden, Thomas J.,Eastwood, Jonathan B.,Donald, James R.,Horbaczewskyj, Chris S.,McRobie, Matthew T.,Tramaseur, Adam,Clark, Ian P.,Towrie, Michael,Robinson, Alan,Krieger, Jean-Philippe,Lynam, Jason M.,Fairlamb, Ian J. S.
supporting information, p. 3979 - 3985 (2021/02/03)
Manganese-mediated borylation of aryl/heteroaryl diazonium salts emerges as a general and versatile synthetic methodology for the synthesis of the corresponding boronate esters. The reaction proved an ideal testing ground for delineating the Mn species responsible for the photochemical reaction processes, that is, involving either Mn radical or Mn cationic species, which is dependent on the presence of a suitably strong oxidant. Our findings are important for a plethora of processes employing Mn-containing carbonyl species as initiators and/or catalysts, which have considerable potential in synthetic applications.
Improvement in the Palladium-Catalyzed Miyaura Borylation Reaction by Optimization of the Base: Scope and Mechanistic Study
Barroso, Santiago,Joksch, Markus,Puylaert, Pim,Tin, Sergey,Bell, Stephen J.,Donnellan, Luke,Duguid, Stewart,Muir, Colin,Zhao, Peichao,Farina, Vittorio,Tran, Duc N.,De Vries, Johannes G.
supporting information, p. 103 - 109 (2020/12/22)
Aryl boronic acids and esters are important building blocks in API synthesis. The palladium-catalyzed Suzuki-Miyaura borylation is the most common method for their preparation. This paper describes an improvement of the current reaction conditions. By using lipophilic bases such as potassium 2-ethyl hexanoate, the borylation reaction could be achieved at 35 °C in less than 2 h with very low palladium loading (0.5 mol %). A preliminary mechanistic study shows a hitherto unrecognized inhibitory effect by the carboxylate anion on the catalytic cycle, whereas 2-ethyl hexanoate minimizes this inhibitory effect. This improved methodology enables borylation of a wide range of substrates under mild conditions.
Visible-Light-Induced Ni-Catalyzed Radical Borylation of Chloroarenes
Tian, Ya-Ming,Guo, Xiao-Ning,Krummenacher, Ivo,Wu, Zhu,Nitsch, J?rn,Braunschweig, Holger,Radius, Udo,Marder, Todd B.
supporting information, p. 18231 - 18242 (2020/11/02)
A highly selective and general photoinduced C-Cl borylation protocol that employs [Ni(IMes)2] (IMes = 1,3-dimesitylimidazoline-2-ylidene) for the radical borylation of chloroarenes is reported. This photoinduced system operates with visible light (400 nm) and achieves borylation of a wide range of chloroarenes with B2pin2 at room temperature in excellent yields and with high selectivity, thereby demonstrating its broad utility and functional group tolerance. Mechanistic investigations suggest that the borylation reactions proceed via a radical process. EPR studies demonstrate that [Ni(IMes)2] undergoes very fast chlorine atom abstraction from aryl chlorides to give [NiI(IMes)2Cl] and aryl radicals. Control experiments indicate that light promotes the reaction of [NiI(IMes)2Cl] with aryl chlorides generating additional aryl radicals and [NiII(IMes)2Cl2]. The aryl radicals react with an anionic sp2-sp3 diborane [B2pin2(OMe)]- formed from B2pin2 and KOMe to yield the corresponding borylation product and the [Bpin(OMe)]?- radical anion, which reduces [NiII(IMes)2Cl2] under irradiation to regenerate [NiI(IMes)2Cl] and [Ni(IMes)2] for the next catalytic cycle.
Room temperature Pd(0)/Ad3P-catalyzed coupling reactions of aryl chlorides with bis(pinacolato)diboron
Dong, Jie,Guo, Hui,Peng, Wei,Hu, Qiao-Sheng
supporting information, p. 760 - 763 (2019/02/16)
Room temperature Pd(0)/Ad3P-catalyzed cross-coupling reactions of aryl chlorides with bis(pinacolato)diboron are described. The Pd(0)/Ad3P catalyst, generated from Ad3P-coordinated acetanilide-based palladacycle complex, proved to be an efficient catalyst system for the Miyaura borylation reactions of a variety of aryl chlorides with bis(pinacolato)diboron. The mild reaction condition, the easy availability of the catalyst and good coupling yields make these reactions potentially useful in organic synthesis.
Mechanism and Scope of Nickel-Catalyzed Decarbonylative Borylation of Carboxylic Acid Fluorides
Malapit, Christian A.,Bour, James R.,Laursen, Simon R.,Sanford, Melanie S.
supporting information, p. 17322 - 17330 (2019/11/03)
This Article describes the development of a base-free, nickel-catalyzed decarbonylative coupling of carboxylic acid fluorides with diboron reagents to selectively afford aryl boronate ester products. Detailed studies were conducted to assess the relative rates of direct transmetalation between aryl boronate esters and diboron reagents and a bisphosphine nickel(aryl)(fluoride) intermediate. These investigations revealed that diboron reagents undergo transmetalation with this Ni(aryl)(fluoride) intermediate at rates significantly faster than their aryl boronate ester congeners. Furthermore, the reactivity of both boron reagents toward transmetalation is enhanced with increasing electrophilicity of the boron center. These mechanistic insights were leveraged to develop a catalytic decarbonylative borylation of acid fluorides that proved applicable to a variety of (hetero)aryl carboxylic acid fluorides as well as diverse diboron reagents. The acid fluorides can be generated in situ directly from carboxylic acids. Furthermore, the mechanistic studies directed the identification of various air-stable Ni pre-catalysts for this transformation.
Nickel-catalysed decarbonylative borylation of aroyl fluorides
Wang, Zhenhua,Wang, Xiu,Nishihara, Yasushi
supporting information, p. 13969 - 13972 (2019/01/03)
The first Ni(cod)2/PPh3 catalyst system has been established for decarbonylative borylation of aroyl fluorides with bis(pinacolato)diboron. A wide range of functional groups in the substrates were well tolerated. The ease of access of the starting aroyl fluorides indicates that these results might become an alternative to the existing decarbonylation events.
Novel compound and organic light-emitting device including same
-
Paragraph 0263, (2017/12/09)
The invention relates to a novel compound and organic light-emitting device including same. The compound can be used as a material of an organic material layer of the organic light-emitting device. With the cmopound, the organic light-emitting device is i
