286-99-7Relevant articles and documents
Fe-doped H3PMo12O40 immobilized on covalent organic frameworks (Fe/PMA@COFs): A heterogeneous catalyst for the epoxidation of cyclooctene with H2O2
Yu, Dandan,Gao, Wenxiu,Xing, Shuyu,Lian, Lili,Zhang, Hao,Wang, Xiyue,Lou, Dawei
, p. 4884 - 4891 (2019)
Covalent organic frameworks (COFs) have arisen as one kind of devisable porous organic polymer that has attracted immense attention in catalytic applications. In this work, we prepared cost-effective imine-based COFs (COF-300, COF-LZU1 and CIN-1) via a reaction kettle operated in place of a traditional sealed Pyrex tube. Then, phosphomolybdic acid (PMA) and iron ions were immobilized on the COF supports by impregnation; the resulting frameworks were denoted as Fe/PMA@COFs (Fe/PMA@COF-LZU1, Fe/PMA@CIN-1 and Fe/PMA@COF-300). A series of characterization results demonstrated that the PMA and iron ions were uniformly dispersed on the surface/cavities of the COFs. The catalytic properties of the obtained Fe/PMA@COFs were investigated in the epoxidation of cyclooctene with H2O2 as the oxidant. The experimental results show that the Fe/PMA@CIN-1 composite can act as an efficient heterogeneous catalyst for the epoxidation of cyclooctene. The intramolecular charge transfer between the COFs and the dual sites (PMA and Fe ions), the spatial structure and the nitrogen content of the COFs played critical roles in dispersing and stabilizing the active species, which are closely connected with the activity and stability of the catalysts. A novel efficient heterogeneous catalyst for the epoxidation of olefins via a simple and cost-effective process is provided, and this experiment demonstrates the notable application prospects of the covalent organic skeleton as a catalyst support.
Catalytic epoxidation of cyclic alkenes with air over CoOx/zeolite heterogeneous catalysts
Ma,Lu,Wei,Zhao,Zhan,Zhou,Xia
, p. 98 - 102 (2015)
The supported CoOx/zeolites have been prepared and applied for the epoxidation of cyclic alkenes with air. The catalysts are characterized by powder X-ray diffraction (XRD), ultraviolet-visible spectroscopy (UV-vis) and scanning electron microscope (SEM). Among these CoOx/zeolite catalysts, 2.4% CoOx/Y exhibits the best catalytic activity for the epoxidation of cis-cyclooctene with 61.2 mol% conversion and 98.8 mol% selectivity of epoxide. Some factors such as the kind of zeolites, the oxidants, the solvents, the Co contents, the reaction temperature and time play important roles in controlling the epoxidation. The recyclable stability of the 2.4% CoOx/Y catalyst is confirmed.
Epoxidation of alkenes through oxygen activation over a bifunctional CuO/Al2O3 catalyst
Scotti, Nicola,Ravasio, Nicoletta,Zaccheria, Federica,Psaro, Rinaldo,Evangelisti, Claudio
, p. 1957 - 1959 (2013)
The epoxidation of alkenes was carried out over a CuO/Al2O 3 catalyst using cumene as an oxygen carrier, through a one-pot reaction, giving high conversion and selectivity with different substrates. Trans-β-methylstyrene gave the corresponding epoxide in 95% yield after 3 h. The Royal Society of Chemistry 2013.
Lipase catalysed oxidations in a sugar-derived natural deep eutectic solvent
Vagnoni, Martina,Samorì, Chiara,Pirini, Daniele,Vasquez De Paz, Maria Katrina,Gidey, Dawit Gebremichael,Galletti, Paola
, (2021/05/06)
Chemoenzymatic oxidations involving the CAL-B/H2O2 system was developed in a sugar derived Natural Deep Eutectic Solvent (NaDES) composed by a mixture of glucose, fructose and sucrose. Good to excellent conversions of substrates like cyclooctene, limonene, oleic acid and stilbene to their corresponding epoxides, cyclohexanone to its corresponding lactone and 2-phenylacetophenone to its corresponding ester, demonstrate the viability of the sugar NaDES as a reaction medium for epoxidation and Baeyer-Villiger oxidation.
Highly selective and efficient olefin epoxidation with pure inorganic-ligand supported iron catalysts
Zhou, Zhuohong,Dai, Guoyong,Ru, Shi,Yu, Han,Wei, Yongge
supporting information, p. 14201 - 14205 (2019/10/02)
Over the past two decades, there have been major developments in the transition iron-catalyzed selective oxidation of alkenes to epoxides; a common structure found in drug, isolated natural products, and fine chemicals. Many of these approaches have enabled highly efficient and selective epoxidation of alkenes via the design of specialized ligands, which facilitates to control the activity and selectivity of the reactions catalyzed by iron atom. Herein, we report the development of the olefin epoxidation with inorganic-ligand supported iron-catalysts using 30% H2O2 as an oxidant, and the mechanism is similar to iron-porphyrin type. With the catalyst 1, (NH4)3[FeMo6O18(OH)6], various aromatic and aliphatic alkenes were successfully transformed into the corresponding epoxides with excellent yields as well as chemo- and stereo-selectivity. This catalytic system possesses the advantages of being able to avoid the use of expensive, toxic, air/moisture sensitive and commercially unavailable organic ligands. The generality of this methodology is simple to operate and exhibits high catalytic activity as well as excellent stability, which gives it the potential to be used on an industrial scale, and maybe opens a way for the catalytic oxidation reaction via inorganic-ligand coordinated iron catalysis.
