3376-36-1Relevant articles and documents
Preparation method of benzyloxyamine hydrochloride
-
Paragraph 0035-0039, (2021/04/14)
The invention discloses a preparation method of benzyloxyamine hydrochloride. The preparation method comprises the following steps: (1) dispersing ketoxime 2 and alkali metal hydroxide into a mixed solvent of dimethylacetamide and water at the temperature of 50-55 DEG C and the stirring speed of 100-120 rpm; (2) dropwise adding a benzyl halide compound 1 into a dispersion body obtained in the step (1), reacting for 130-140 minutes at the temperature of 60-65 DEG C after dropwise adding is completed, then cooling to room temperature, adding water, extracting by using normal hexane, and distilling an organic phase under reduced pressure to obtain a product 3; and (3) adding the product 3 obtained in the step (2) into a mixed solution of methanol and a hydrochloric acid solution with the mass concentration of 38% , reacting for 200-220 minutes at the temperature of 35-40 DEG C and at the stirring speed of 80-100 rpm, distilling under reduced pressure until a solid is separated out, cooling to room temperature, washing the solid with petroleum ether, and drying to obtain the target product 4-benzyloxyamine hydrochloride. According to the preparation method, the total yield can reach 95% or above, and the product purity can reach 99% or above.
Direct ortho -C-H functionalization of aromatic alcohols masked by acetone oxime ether via exo -palladacycle
Guo, Kun,Chen, Xiaolan,Guan, Mingyu,Zhao, Yingsheng
supporting information, p. 1802 - 1805 (2015/04/14)
A simple and practical exo-oxime ether auxilixary for ortho-C-H functionalization of aromatic alcohols has been developed. Selective olefination of aromatic alcohols were first achieved via a six- or seven-membered exo-acetone oxime ether palladacycle with broad substrate scope. In addition, the crystal of the exo-palladacycle intermediate was obtained for the first time, and the application of this method in total synthesis of 3-deoxyisoochracinic acid was accomplished via a novel retro-synthetic disconnection approach, thus demonstrating the utility of this transformation.
Thermal decomposition of O-benzyl ketoximes; role of reverse radical disproportionation
Blake, Jessie A.,Ingold, Keith U.,Lin, Shuqiong,Mulder, Peter,Pratt, Derek A.,Sheeller, Brad,Walton, John C.
, p. 415 - 420 (2007/10/03)
Thermolyses of seven dialkyl, two alkyl-aryl and two diaryl O-benzyl ketoxime ethers, R1R2C=NOCH2Ph, have been examined in three hydrogen donor solvents: tetralin, 9,10-dihydrophenanthrene, and 9,10-dihydroanthracene. All the oxime ethers gave the products expected from homolytic scission of both the O-C bond (viz., R1R2C=NOH and PhCH3) and N-O bond (viz., R1R2C=NH and PhCH2OH). The yields of these products depended on which solvent was used and the rates of decomposition of the O-benzyl oxime ethers were greater in 9,10-dihydrophenanthrene and 9,10-dihydroanthracene than in tetralin. These results indicated that a reverse radical disproportionation reaction in which a hydrogen atom was transferred from the solvent to the oxime ether, followed by β-scission of the resultant aminoalkyl radical, must be important in the latter two solvents. Benzaldehyde was found to be an additional product from thermolyses conducted in tetralin. This, and other evidence, indicated that another induced decomposition mode involving abstraction of a benzylic hydrogen atom, followed by β-scission of the resulting benzyl radical, became important for some substrates. Participation by minor amounts of enamine tautomers of the oxime ethers was shown to be negligible by comparison of thermolysis data for the O-benzyloxime of bicyclo[3.3.1]nonan-9-one, which cannot give an enamine tautomer, with that of the O-benzyloxime of cyclohexanone.
