35684-26-5

Upstream product

• 501-65-5 diphenyl acetylene 
• 591-50-4 iodobenzene 
• 536-74-3 phenylacetylene 
• 3240-11-7 Phenylacetylene-d1 
• 931-55-5 phenyl-diazene 
• 51271-14-8 (+/-)-erythro-α-acetoxy-α'-deuterio-bibenzyl 
• 51271-14-8 (+/-)-threo-α-acetoxy-α'-deuterio-bibenzyl 
• 10277-65-3 (+/-)-erythro-α-benzoyloxy-α'-deuterio-bibenzyl 
• 100-52-7 benzaldehyde 
• 3592-47-0 Benzaldehyde-d 
• 100-44-7 benzyl chloride 
• 90862-01-4 +/--threo-2-(2-deuterio-1,2-diphenylethoxy)-pyrazine 
• 7664-41-7 ammonia 
• 773-47-7 dimethyl benzylphosphonate 

Relevant academic research and scientific papers

Ligand-free (: Z)-selective transfer semihydrogenation of alkynes catalyzed by in situ generated oxidizable copper nanoparticles

Herein, we present (Z)-selective transfer semihydrogenation of alkynes based on in situ generated CuNPs in the presence of hydrogen donors, such as ammonia-borane and a green protic solvent. This environmentally friendly method is characterized by operational simplicity combined with high stereo- and chemoselectivity and functional group compatibility. Auto-oxidation of CuNPs after the completion of a semihydrogenation reaction results in the formation of a water-soluble ammonia complex, so that the catalyst may be reused several times by simple phase-separation with no need for any special regeneration processes. Formed NH4B(OR)4 can be easily transformed back into ammonia-borane or into boric acid. In addition, a one-pot tandem sequence involving a Suzuki reaction followed by semihydrogenation was presented, which allows minimization of chemical waste production.

An Amine-Assisted Ionic Monohydride Mechanism Enables Selective Alkyne cis-Semihydrogenation with Ethanol: From Elementary Steps to Catalysis

The selective synthesis of Z-alkenes in alkyne semihydrogenation relies on the reactivity difference of the catalysts toward the starting materials and the products. Here we report Z-selective semihydrogenation of alkynes with ethanol via a coordination-induced ionic monohydride mechanism. The EtOH-coordination-driven Cl- dissociation in a pincer Ir(III) hydridochloride complex (NCP)IrHCl (1) forms a cationic monohydride, [(NCP)IrH(EtOH)]+Cl-, that reacts selectively with alkynes over the corresponding Z-alkenes, thereby overcoming competing thermodynamically dominant alkene Z-E isomerization and overreduction. The challenge for establishing a catalytic cycle, however, lies in the alcoholysis step; the reaction of the alkyne insertion product (NCP)IrCl(vinyl) with EtOH does occur, but very slowly. Surprisingly, the alcoholysis does not proceed via direct protonolysis of the Ir-C(vinyl) bond. Instead, mechanistic data are consistent with an anion-involved alcoholysis pathway involving ionization of (NCP)IrCl(vinyl) via EtOH-for-Cl substitution and reversible protonation of Cl- ion with an Ir(III)-bound EtOH, followed by β-H elimination of the ethoxy ligand and C(vinyl)-H reductive elimination. The use of an amine is key to the monohydride mechanism by promoting the alcoholysis. The 1-amine-EtOH catalytic system exhibits an unprecedented level of substrate scope, generality, and compatibility, as demonstrated by Z-selective reduction of all alkyne classes, including challenging enynes and complex polyfunctionalized molecules. Comparison with a cationic monohydride complex bearing a noncoordinating BArF- ion elucidates the beneficial role of the Cl- ion in controlling the stereoselectivity, and comparison between 1-amine-EtOH and 1-NaOtBu-EtOH underscores the fact that this base variable, albeit in catalytic amounts, leads to different mechanisms and consequently different stereoselectivity.

Dinuclear cobalt complex-catalyzed stereodivergent semireduction of alkynes: Switchable selectivities controlled by H2O

Catalytic semireduction of internal alkynes to alkenes is very important for organic synthesis. Although great success has been achieved in this area, switchable Z/E stereoselectivity based on a single catalyst for the semireduction of internal alkynes is a longstanding challenge due to the multichemo- and stereoselectivity, especially based on less-expensive earth-abundant metals. Herein, we describe a switchable semireduction of alkynes to (Z)- or (E)-alkenes catalyzed by a dinuclear cobalt complex supported by a macrocyclic bis pyridyl diimine (PDI) ligand. It was found that cis-reduction of the alkyne occurs first and the Z-E alkene stereoisomerization process is formally controlled by the amount of H2O, since the concentration of H2O may influence the catalytic activity of the catalyst for isomerization. Therefore, this protocol provides a facile way to switch to either the (Z)- or (E)-olefin isomer in a single transformation by adjusting the amount of water.

Visible light-mediated metal-free double bond deuteration of substituted phenylalkenes

Various bromophenylalkenes were reductively photodebrominated by using 1,3-dimethyl-2-phenyl-1H-benzo-[d]imidazoline (DMBI) and 9,10-dicyanoanthracene. With deuterated DMBI analogs (the most effective was DMBI-d11), satisfactory to excellent isotopic yields were obtained. DMBI-d11 could also be regenerated from the reaction mixtures with a recovery rate of up to 50%. The combination of the photodebromination reaction with conventional methods for bromoalkene synthesis enables sequential monodeuteration of a double bond without the necessity of a metal catalyst. This journal is

cis-Selective Transfer Semihydrogenation of Alkynes by Merging Visible-Light Catalysis with Cobalt Catalysis

Herein, the first example of visible-light-driven, cobalt-catalyzed transfer semihydrogenation of alkynes to alkenes is reported. It is carried out by using Ir[dF(CF3)ppy]2(dtbbpy)]PF6 as photosensitizer, CoBr2/n-Bu3P as proton-reducing catalyst, and i-Pr2NEt/AcOH as the hydrogen source. Under the established catalytic system, the semihydrogenation proceeds with Z as the major selectivity and with inhibition of over-reduction. Under mild reaction conditions, both internal and terminal alkynes, as well as reducible functional groups such as halogen, cyano, and ester, are tolerated. Preliminary mechanistic studies revealed the dual role of the photosensitizer in initiating the reaction via a single-electron transfer process and controlling the stereoselectivity via an energy transfer process. (Figure presented.).

Enantioselective Twofold C?H Annulation of Formamides and Alkynes without Built-in Chelating Groups

Twofold C?H annulation of readily available formamides and alkynes without built-in chelating groups was achieved. Ni?Al bimetallic catalysis enabled by a bulky BINOL-derived chiral secondary phosphine oxide (SPO) ligand proved to be critical for high reactivity and high selectivity. This reaction uses readily available formamides as starting materials and provides a concise synthetic pathway to a broad range of chiral ferrocenes in 40–98 % yield and 93–99 % ee.

A Bidentate Ru(II)-NC Complex as a Catalyst for Semihydrogenation of Alkynes to (E)-Alkenes with Ethanol

Four Ru(II)-NC complexes were tested as catalysts for semihydrogenation of internal alkynes to (E)-alkenes with ethanol, and the complex {(C5H4N)(C6H4)}RuCl(CO)(PPh3)2 (1a) showed the highest activity. The reactions proceeded well with 1 mol % catalyst loading and 0.1 equiv of t-BuONa at 110 °C for 1 h, and 32 alkenes were synthesized with excellent E:Z selectivity. This is the first ruthenium-catalyzed semihydrogenation of internal alkynes to (E)-alkenes using ethanol as the hydrogen donor.

Stereo-controlledanti-hydromagnesiation of aryl alkynes by magnesium hydrides

A concise protocol foranti-hydromagnesiation of aryl alkynes was established using 1?:?1 molar combination of sodium hydride (NaH) and magnesium iodide (MgI2) without the aid of any transition metal catalysts. The resulting alkenylmagnesium intermediates could be trapped with a series of electrophiles, thus providing facile accesses to stereochemically well-defined functionalized alkenes. Mechanistic studies by experimental and theoretical approaches imply that polar hydride addition from magnesium hydride (MgH2) is responsible for the process.

Cobalt catalyzed stereodivergent semi-hydrogenation of alkynes using H2O as the hydrogen source

Cobalt-catalyzed stereodivergent semi-hydrogenation of internal alkynes to alkenes is developed. The reaction proceeded through transfer hydrogenation under mild conditions using a base metal CoI2 as the catalyst, and H2O/MeOH as the hydrogen source with Zn as the reductant. The E/Z-selectivity of the product could be switched by changing the solvent and by inclusion/exclusion of a bidentate phosphine ligand (dppe). This method provides a simple and cost effective pathway for the synthesis of 1,2-dideuterioalkenes.

Phosphine-free cobalt pincer complex catalyzed: Z -selective semi-hydrogenation of unbiased alkynes

Herein, we report a novel, molecularly defined NNN-type cobalt pincer complex catalyzed transfer semi-hydrogenation of unbiased alkynes to Z-selective alkenes. This unified process is highly stereo- and chemo-selective and exhibits a broad scope as well as wide functional group tolerance. Ammonia-borane (AB), a bench-stable substrate with high gravimetric hydrogen capacity, was used as a safe and practical transfer hydrogenating source.