Welcome to LookChem.com Sign In|Join Free
  • or
Benzonitrile, 4-[(phenylamino)methyl]- is a chemical with a specific purpose. Lookchem provides you with multiple data and supplier information of this chemical.

37812-49-0

Post Buying Request

37812-49-0 Suppliers

Recommended suppliers

  • Product
  • FOB Price
  • Min.Order
  • Supply Ability
  • Supplier
  • Contact Supplier

37812-49-0 Usage

Check Digit Verification of cas no

The CAS Registry Mumber 37812-49-0 includes 8 digits separated into 3 groups by hyphens. The first part of the number,starting from the left, has 5 digits, 3,7,8,1 and 2 respectively; the second part has 2 digits, 4 and 9 respectively.
Calculate Digit Verification of CAS Registry Number 37812-49:
(7*3)+(6*7)+(5*8)+(4*1)+(3*2)+(2*4)+(1*9)=130
130 % 10 = 0
So 37812-49-0 is a valid CAS Registry Number.

37812-49-0SDS

SAFETY DATA SHEETS

According to Globally Harmonized System of Classification and Labelling of Chemicals (GHS) - Sixth revised edition

Version: 1.0

Creation Date: Aug 18, 2017

Revision Date: Aug 18, 2017

1.Identification

1.1 GHS Product identifier

Product name N-(4-cyanobenzyl)-N-phenylamine

1.2 Other means of identification

Product number -
Other names 4-NCC6H4CH2NHPh

1.3 Recommended use of the chemical and restrictions on use

Identified uses For industry use only.
Uses advised against no data available

1.4 Supplier's details

1.5 Emergency phone number

Emergency phone number -
Service hours Monday to Friday, 9am-5pm (Standard time zone: UTC/GMT +8 hours).

More Details:37812-49-0 SDS

37812-49-0Relevant academic research and scientific papers

BF3·Et2O as a metal-free catalyst for direct reductive amination of aldehydes with amines using formic acid as a reductant

Fan, Qing-Hua,Liu, Xintong,Luo, Zhenli,Pan, Yixiao,Xu, Lijin,Yang, Ji,Yao, Zhen,Zhang, Xin

supporting information, p. 5205 - 5211 (2021/07/29)

A versatile metal- and base-free direct reductive amination of aldehydes with amines using formic acid as a reductant under the catalysis of inexpensive BF3·Et2O has been developed. A wide range of primary and secondary amines and diversely substituted aldehydes are compatible with this transformation, allowing facile access to various secondary and tertiary amines in high yields with wide functional group tolerance. Moreover, the method is convenient for the late-stage functionalization of bioactive compounds and preparation of commercialized drug molecules and biologically relevant N-heterocycles. The procedure has the advantages of simple operation and workup and easy scale-up, and does not require dry conditions, an inert atmosphere or a water scavenger. Mechanistic studies reveal the involvement of imine activation by BF3and hydride transfer from formic acid.

Minimization of Back-Electron Transfer Enables the Elusive sp3 C?H Functionalization of Secondary Anilines

Zhao, Huaibo,Leonori, Daniele

, p. 7669 - 7674 (2021/03/08)

Anilines are some of the most used class of substrates for application in photoinduced electron transfer. N,N-Dialkyl-derivatives enable radical generation α to the N-atom by oxidation followed by deprotonation. This approach is however elusive to monosubstituted anilines owing to fast back-electron transfer (BET). Here we demonstrate that BET can be minimised by using photoredox catalysis in the presence of an exogenous alkylamine. This approach synergistically aids aniline SET oxidation and then accelerates the following deprotonation. In this way, the generation of α-anilinoalkyl radicals is now possible and these species can be used in a general sense to achieve divergent sp3 C?H functionalization.

Chromium-Catalyzed Alkylation of Amines by Alcohols

Fertig, Robin,Irrgang, Torsten,Kallmeier, Fabian,Kempe, Rhett

supporting information, p. 11789 - 11793 (2020/05/26)

The alkylation of amines by alcohols is a broadly applicable, sustainable, and selective method for the synthesis of alkyl amines, which are important bulk and fine chemicals, pharmaceuticals, and agrochemicals. We show that Cr complexes can catalyze this C?N bond formation reaction. We synthesized and isolated 35 examples of alkylated amines, including 13 previously undisclosed products, and the use of amino alcohols as alkylating agents was demonstrated. The catalyst tolerates numerous functional groups, including hydrogenation-sensitive examples. Compared to many other alcohol-based amine alkylation methods, where a stoichiometric amount of base is required, our Cr-based catalyst system gives yields higher than 90 % for various alkyl amines with a catalytic amount of base. Our study indicates that Cr complexes can catalyze borrowing hydrogen or hydrogen autotransfer reactions and could thus be an alternative to Fe, Co, and Mn, or noble metals in (de)hydrogenation catalysis.

In water alkylation of amines with alcohols through a borrowing hydrogen process catalysed by ruthenium nanoparticles

Risi, Caterina,Calamante, Massimo,Cini, Elena,Faltoni, Valentina,Petricci, Elena,Rosati, Filippo,Taddei, Maurizio

supporting information, p. 327 - 331 (2020/02/13)

A simple and environmentally benign procedure for the synthesis of secondary amines in water has been developed. Combining Ru3(CO)12, tetraphenylcyclopentadienone and a small quantity of TGPS-750-M surfactant, primary and secondary alcohols were alkylated at N employing equimolar amounts of aromatic amines in water. The reaction occurs under microwave (MW) dielectric heating with high conversion and high yield. When required, the use of biomass-derived 2-MeTHF or GVL as a co-solvent is possible. Under the influence of MWs, a Ru nanoparticle-nanomicelle combination was formed acting as an effective and recyclable catalyst. This protocol was also employed for "in water" cyclisation to synthesise biologically relevant pyrrolobenzodiazepines (PBDs).

Efficient One-Pot Reductive Aminations of Carbonyl Compounds with Aquivion-Fe as a Recyclable Catalyst and Sodium Borohydride

Airoldi, Veronica,Piccolo, Oreste,Roda, Gabriella,Appiani, Rebecca,Bavo, Francesco,Tassini, Riccardo,Paganelli, Stefano,Arnoldi, Sebastiano,Pallavicini, Marco,Bolchi, Cristiano

supporting information, p. 162 - 168 (2019/12/11)

A one-pot reductive amination of aldehydes and ketones with NaBH4 was developed with a view to providing efficient, economical and greener synthetic conditions. A recyclable iron-based Lewis catalyst, Aquivion-Fe, was used to promote imine formation in cyclopentyl methyl ether, followed by the addition of a small amount of methanol to the reaction mixture to enable C=N reduction by NaBH4. The protocol, applied to a wide number of amines and carbonyl compounds, resulted in ever complete conversion of these latter with excellent chemoselectivity towards the expected amination products in the most cases. Isolated yields, determined for a selection of the screened substrates, were found consistent with the previously obtained conversion and selectivity data. Cinacalcet, an important active pharmaceutical ingredient, was efficiently prepared by the title procedure.

Ruthenium N-Heterocyclic Carbene Complexes for Chemoselective Reduction of Imines and Reductive Amination of Aldehydes and Ketones

Kathuria, Lakshay,Samuelson, Ashoka G.

supporting information, (2020/06/17)

Chemoselective reduction of imines to secondary amines is catalyzed efficiently by tethered and untethered, half-sandwich ruthenium N-heterocyclic carbene (NHC) complexes at room temperature. The untethered Ru-NHC complexes are more efficient as catalysts for the reduction of aldimines and ketimines than the tethered complexes. Using the best untethered complex as a catalyst, electronic and steric demands on the reaction was probed using a series of imines. Chemoselectivity of the catalyst towards imine reduction was tested by performing inter and intramolecular competitive reactions in a variety of ways. The catalyst exhibits a very high TON and TOF under anaerobic conditions.

Catalyst- And solvent-free efficient access to: N -alkylated amines via reductive amination using HBpin

Bauri, Somnath,Pandey, Vipin K.,Rit, Arnab

, p. 3853 - 3857 (2020/07/27)

A sustainable approach which works under catalyst- and solvent-free conditions for the synthesis of structurally diverse secondary amines has been uncovered. This one-pot protocol works efficiently at room temperature and is compatible with a wide range of sterically and electronically diverse aldehydes and primary amines. Notably, this simple process offers scalability, excellent functional group tolerance, chemoselectivity, and is also effective at the synthesis of biologically relevant molecules. This journal is

Cross dehydrogenative coupling strategy for allylation of benzylanilines promoted by DDQ

Xiong, Ruimei,Hussain, Muhammad Ijaz,Liu, Qing,Xia, Wen,Xiong, Yan

supporting information, (2019/12/11)

A cross dehydrogenative coupling strategy for allylation of benzylanilines promoted by DDQ is reported, which uses nonmetallic quinone DDQ as an oxidant in the allylation of N-benzylanilines under mild conditions. C–C bond with high selectivity and activity was constructed in this reaction and homoallylic amines were obtained with yields of up to 99%.

Alkali Metal–Promoted Facile Synthesis of Secondary Amines from Imines and Carbodiimides

Panda, Tarun K.,Banerjee, Indrani,Sagar, Shweta

, (2020/05/25)

We present here an efficient method for the hydroboration of aldimines (-C=N-) with pinacolborane (HBpin) using an alkali metal catalyst, potassium benzyl. The reaction was accomplished with unprecedented catalytic efficiency under mild and solvent-free conditions to afford the high yield of the corresponding N-boryl amines up to 97percent. Various functionalities on aldimines were incorporated for hydroboration. The corresponding boryl amines were subjected to further hydrolysis to yield the corresponding secondary amines with good yields up to 89percent. This protocol for the reaction demonstrates an atom-economic and green method with diverse imines that bears excellent functional group tolerance. Chemoselective reduction of imines was also attained, with good yields of 74–89percent. We also propose the most plausible mechanism involving the formation of metal hydride as the active pre-catalyst.

Post a RFQ

Enter 15 to 2000 letters.Word count: 0 letters

Attach files(File Format: Jpeg, Jpg, Gif, Png, PDF, PPT, Zip, Rar,Word or Excel Maximum File Size: 3MB)

1 Customer Service

What can I do for you?
Get Best Price

Get Best Price for 37812-49-0