Welcome to LookChem.com Sign In|Join Free

CAS

  • or

4416-85-7

Post Buying Request

4416-85-7 Suppliers

Recommended suppliersmore

  • Product
  • FOB Price
  • Min.Order
  • Supply Ability
  • Supplier
  • Contact Supplier

4416-85-7 Usage

General Description

2-((1-ethoxyethoxy)Methyl)oxirane, also known as glycidyl ethoxy ethyl ether, is a chemical compound with the molecular formula C7H14O3. It is an epoxide compound that is commonly used as a reactive diluent in epoxy resins. 2-((1-ethoxyethoxy)Methyl)oxirane is colorless and has a slightly sweet odor. It is soluble in organic solvents and is commonly used in the formulation of adhesives, coatings, and polymers. However, the use of this compound has raised concerns about its potential health effects and environmental impact, particularly due to its potential for causing skin irritation and its persistence in the environment. Therefore, precautions should be taken when handling and using this chemical.

Check Digit Verification of cas no

The CAS Registry Mumber 4416-85-7 includes 7 digits separated into 3 groups by hyphens. The first part of the number,starting from the left, has 4 digits, 4,4,1 and 6 respectively; the second part has 2 digits, 8 and 5 respectively.
Calculate Digit Verification of CAS Registry Number 4416-85:
(6*4)+(5*4)+(4*1)+(3*6)+(2*8)+(1*5)=87
87 % 10 = 7
So 4416-85-7 is a valid CAS Registry Number.

4416-85-7SDS

SAFETY DATA SHEETS

According to Globally Harmonized System of Classification and Labelling of Chemicals (GHS) - Sixth revised edition

Version: 1.0

Creation Date: Aug 18, 2017

Revision Date: Aug 18, 2017

1.Identification

1.1 GHS Product identifier

Product name 2-(1-ethoxyethoxymethyl)oxirane

1.2 Other means of identification

Product number -
Other names 1-ethoxyethyl glycidyl ether

1.3 Recommended use of the chemical and restrictions on use

Identified uses For industry use only.
Uses advised against no data available

1.4 Supplier's details

1.5 Emergency phone number

Emergency phone number -
Service hours Monday to Friday, 9am-5pm (Standard time zone: UTC/GMT +8 hours).

More Details:4416-85-7 SDS

4416-85-7Downstream Products

4416-85-7Relevant articles and documents

Synthesis of Linear High Molar Mass Glycidol-Based Polymers by Monomer-Activated Anionic Polymerization

Gervais, Matthieu,Brocas, Anne-Laure,Cendejas, Gabriel,Deffieux, Alain,Carlotti, Stephane

, p. 1778 - 1784 (2010)

Linear polyglycidols of high molar masses were prepared by the monomer-activated anionic polymerization of the corresponding protected monomers, ethoxyethyl glycidyl ether and tert-butyl glycidyl ether, using a system composed of tetraoctylammonium bromide as initiator and triisobutylaluminum as monomer activator. The aluminic compound was used in 1.5-5-fold excess compared to the initiator. Linear poly(ethoxyethyl glycidyl ether) and poly(teri-butyl glycidyl ether), with narrow chain dispersity and controlled high molar masses, up to 85 000 g/mol, were prepared at 0 °C in a few hours. Deprotection of hydroxyl functions by acidic treatment of the polymers was shown to proceed quantitatively and cleanly affording the corresponding linear polyglycerol and validating the use of these protecting groups. The copolymerization of protected glycidols with propylene oxide and butene oxide was also investigated with the goal to broaden the scope of this synthetic approach to various polyethers and copolyethers.

TGF-β1-Modified Hyaluronic Acid/Poly(glycidol) Hydrogels for Chondrogenic Differentiation of Human Mesenchymal Stromal Cells

B?ck, Thomas,Schill, Verena,Kr?hnke, Martin,Steinert, Andre F.,Tessmar, J?rg,Blunk, Torsten,Groll, Jürgen

, (2018)

In cartilage regeneration, the biomimetic functionalization of hydrogels with growth factors is a promising approach to improve the in vivo performance and furthermore the clinical potential of these materials. In order to achieve this without compromising network properties, multifunctional linear poly(glycidol) acrylate (PG-Acr) is synthesized and utilized as crosslinker for hydrogel formation with thiol-functionalized hyaluronic acid via Michael-type addition. As proof-of-principle for a bioactivation, transforming growth factor-beta 1 (TGF-β1) is covalently bound to PG-Acr via Traut's reagent which does not compromise the hydrogel gelation and swelling behavior. Human mesenchymal stromal cells (MSCs) embedded within these bioactive hydrogels show a distinct dose-dependent chondrogenesis. Covalent incorporation of TGF-β1 significantly enhances the chondrogenic differentiation of MSCs compared to hydrogels with supplemented noncovalently bound TGF-β1. The observed chondrogenic response is similar to standard cell culture with TGF-β1 addition with each medium change. In general, multifunctional PG-Acr offers the opportunity to introduce a range of biomimetic modifications (peptides, growth factors) into hydrogels and, thus, appears as an attractive potential material for various applications in regenerative medicine.

A pH-and temperature-sensitive macrocyclic graft copolymer composed of PEO ring and multi-poly(2-(dimethylamino) ethyl methacrylate) lateral chains

Pang, Xinchang,Jing, Rongkuan,Pan, Mugang,Huang, Junlian

, p. 1653 - 1662 (2010)

A novel method for the synthesis of macrocyclic graft copolymers was developed through combination of anionic ring-opening polymerization (AROP) and atom transfer radical polymerization (ATRP). A linear α,ω-dihydroxyl poly(ethylene oxide) with pendant acetal protected hydroxyl groups (l-poly(EO-co-EEGE)) was prepared first by the anionic copolymerization of ethylene oxide (EO) and ethoxyethyl glycidyl ether (EEGE). Then l-poly(EO-co-EEGE) was cyclized. The crude cyclized product containing the linear byproduct was hydrolyzed and purified by being treated with α-CD. The pure cyclic copolymer [c-poly(EO-co-Gly)] was esterified by reaction with 2-bromoisobutyryl bromide, and then used as ATRP macroinitiators to initiate polymerization of 2-(dimethylamino) ethyl methacrylate (DMAEMA), and a series of pH-and temperature-sensitive macrocyclic graft copolymers composed of a hydrophilic PEO as the ring and PDMAEMA as side chains (c-PEO-g-PDMAEMA) were obtained. The behavior of pH-and temperature-sensitive macrocyclic copolymers was studied in aqueous solution by fluorescence and dynamic light scattering (DLS). The critical micellization pH values of macrocyclic graft copolymers and their corresponding linear graft copolymers (l-PEO-g-PDMAEMA) were measured. Under the same conditions, the cyclic graft copolymer with the shorter side chains gave the higher critical micellization pH value. The c-PEO-g-PDMAEMA showed the lower critical micellization pH value than the corresponding l-PEO-g-PDMAEMA. The average hydrodynamic diameters (Dh) of the micelles were measured by DLS with the variation of the aqueous solution pH value and temperature. Science China Press and Springer-Verlag Berlin Heidelberg 2010.

Hyperbranched double hydrophilic block copolymer micelles of poly(ethylene oxide) and polyglycerol for pH-responsive drug delivery

Lee, Sueun,Saito, Kyohei,Lee, Hye-Ra,Lee, Min Jae,Shibasaki, Yuji,Oishi, Yoshiyuki,Kim, Byeong-Su

, p. 1190 - 1196 (2012)

We report the synthesis of a well-defined hyperbranched double hydrophilic block copolymer of poly-(ethylene oxide)-hyperbranched-polyglycerol (PEO-hb-PG) to develop an efficient drug delivery system. In specific, we demonstrate the hyperbranched PEO-hb-PG can form a selfassembled micellar structure on conjugation with the hydrophobic anticancer agent doxorubicin, which is linked to the polymer by pH-sensitive hydrazone bonds, resulting in a pHresponsive controlled release of doxorubicin. Dynamic light scattering, atomic force microscopy, and transmission electron microscopy demonstrated successful formation of the spherical core-shell type micelles with an average size of about 200 nm. Moreover, the pH-responsive release of doxorubicin and in vitro cytotoxicity studies revealed the controlled stimuli-responsive drug delivery system desirable for enhanced efficiency. Benefiting from many desirable features of hyperbranched double hydrophilic block copolymers such as enhanced biocompatibility, increased water solubility, and drug loading efficiency as well as improved clearance of the polymer after drug release, we believe that double hydrophilic block copolymer will provide a versatile platform to develop excellent drug delivery systems for effective treatment of cancer.

Inhibition of Herpes Simplex Virus Type 1 Attachment and Infection by Sulfated Polyglycerols with Different Architectures

Pouyan, Paria,Nie, Chuanxiong,Bhatia, Sumati,Wedepohl, Stefanie,Achazi, Katharina,Osterrieder, Nikolaus,Haag, Rainer

, p. 1545 - 1554 (2021/04/05)

Inhibition of herpes simplex virus type 1 (HSV-1) binding to the host cell surface by highly sulfated architectures is among the promising strategies to prevent virus entry and infection. However, the structural flexibility of multivalent inhibitors plays a major role in effective blockage and inhibition of virus receptors. In this study, we demonstrate the inhibitory effect of a polymer scaffold on the HSV-1 infection by using highly sulfated polyglycerols with different architectures (linear, dendronized, and hyperbranched). IC50 values for all synthesized sulfated polyglycerols and the natural sulfated polymer heparin were determined using plaque reduction infection assays. Interestingly, an increase in the IC50 value from 0.03 to 374 nM from highly flexible linear polyglycerol sulfate (LPGS) to less flexible scaffolds, namely, dendronized polyglycerol sulfate and hyperbranched polyglycerol sulfate was observed. The most potent LPGS inhibits HSV-1 infection 295 times more efficiently than heparin, and we show that LPGS has a much reduced anticoagulant capacity when compared to heparin as evidenced by measuring the activated partial thromboplastin time. Furthermore, prevention of infection by LPGS and the commercially available drug acyclovir were compared. All tested sulfated polymers do not show any cytotoxicity at concentrations of up to 1 mg/mL in different cell lines. We conclude from our results that more flexible polyglycerol sulfates are superior to less flexible sulfated polymers with respect to inhibition of HSV-1 infection and may constitute an alternative to the current antiviral treatments of this ubiquitous pathogen.

SUNSCREEN COMPOSITIONS CONTAINING A COMBINATION OF A LINEAR ULTRAVIOLET RADIATION-ABSORBING POLYETHER AND OTHER ULTRAVIOLET-SCREENING COMPOUNDS

-

Page/Page column 36; 37, (2018/02/24)

Sunscreen composition including a combination of a linear ultraviolet radiation absorbing polyether that includes a covalently bound UV-chromophore, and at least one non-polymeric UV-screening compounds.

Post a RFQ

Enter 15 to 2000 letters.Word count: 0 letters

Attach files(File Format: Jpeg, Jpg, Gif, Png, PDF, PPT, Zip, Rar,Word or Excel Maximum File Size: 3MB)

1

What can I do for you?
Get Best Price

Get Best Price for 4416-85-7