5097-90-5

Upstream product

• 13238-38-5 3-(2-phenylethynyl)pyridine 
• 2633-06-9 (E)-3-(2-phenylvinyl)pyridine 
• 626-55-1 3-Bromopyridine 
• 588-73-8 (Z)-β-bromostyrene 
• 103-64-0 bromostyrene 
• 500-22-1 3-pyridinecarboxaldehyde 
• 2001-45-8 tetraphenyl phosphonium chloride 
• 65119-09-7 1-styryltriethoxysilane 
• 135822-91-2 N-(pyridin-3-ylmethylene)-4-methylbenzenesulfonamide 
• 1449-46-3 benzyltriphenylphosphonium bromide 
• 536-74-3 phenylacetylene 
• 13295-94-8 4-(phenylethynyl)pyridine 
• 128071-75-0 2-bromopyridine-3-carboxaldehyde 
• 1644391-85-4 (Z)-2-bromo-3-styrylpyridine 

Relevant academic research and scientific papers

Copper(0) nanoparticle catalyzed Z-Selective Transfer Semihydrogenation of Internal Alkynes

The use of copper(0) nanoparticles in the transfer semihydrogenation of alkynes has been investigated as a lead-free alternative to Lindlar catalysts. A stereo-selective methodology for the hydrogenation of internal alkynes to the corresponding (Z)-alkenes in high isolated yields (86% average) has been developed. This green and sustainable transfer hydrogenation protocol relies on non-noble copper nanoparticles for reduction of both electron-rich and electron-deficient, aliphatic-substituted and aromatic- substituted internal alkynes. Polyols, such as ethylene glycol and glycerol, have been proven to act as hydrogen sources, and excellent stereo- and chemoselectivity have been observed. Enabling technologies, such as microwave and ultrasound irradiation are shown to enhance heat and mass transfer, whether used alone or in combination, resulting in a decrease in reaction time from hours to minutes. (Figure presented.).

A simple and efficientin situgenerated copper nanocatalyst for stereoselective semihydrogenation of alkynes

Development of a simple, effective, and practical method for (Z)-selective semihydrogenation of alkynes has been considered necessary for easy-to-access applications at organic laboratory scales. Herein, (Z)-selective semihydrogenation of alkynes was achieved using a copper nanocatalyst which was generatedin situsimply by adding ammonia borane to an ethanol solution of copper sulfate. Different types of alkynes including aryl-aryl, aryl-alkyl, and aliphatic alkynes were selectively reduced to (Z)-alkenes affording up to 99% isolated yield. The semihydrogenation of terminal alkynes to alkenes and gram-scale applications were also reported. In addition to eliminating catalyst preparation, the proposed approach is simple and practical and serves as a suitable alternative method to the conventional Lindlar catalyst.

Ruthenium-Catalyzed E-Selective Alkyne Semihydrogenation with Alcohols as Hydrogen Donors

Selective direct ruthenium-catalyzed semihydrogenation of diaryl alkynes to the corresponding E-alkenes has been achieved using alcohols as the hydrogen source. The method employs a simple ruthenium catalyst, does not require external ligands, and affords the desired products in > 99% NMR yield in most cases (up to 93% isolated yield). Best results were obtained using benzyl alcohol as the hydrogen donor, although biorenewable alcohols such as furfuryl alcohol could also be applied. In addition, tandem semihydrogenation-alkylation reactions were demonstrated, with potential applications in the synthesis of resveratrol derivatives.

Photocatalyst-free visible light promoted: E → Z isomerization of alkenes

A simple and green method of visible light driven photocatalytic E to Z isomerization of alkenes has been developed. A variety of (Z)-alkenes can be prepared in the presence of visible light, without any additional photocatalyst. This protocol features photocatalyst-free conditions, which are mild, tolerant, and operationally simple, and is easy to implement.

Chemoselective semihydrogenation of alkynes catalyzed by manganese(i)-PNP pincer complexes

A general manganese catalyzed chemoselective semihydrogenation of alkynes to olefins in the presence of molecular hydrogen is described. The best results are obtained by applying the aliphatic Mn PNP pincer complex Mn-3c which allows the transformation of various substituted internal alkynes to the respective Z-olefins under mild conditions and in high yields. Mechanistic investigations based on experiments and computations indicate the formation of the Z-isomer via an outer-sphere mechanism.

Methanol as the Hydrogen Source in the Selective Transfer Hydrogenation of Alkynes Enabled by a Manganese Pincer Complex

The first base metal-catalyzed transfer hydrogenation of alkynes with methanol is described. An air and moisture stable manganese pincer complex catalyzes the reduction of a variety of different alkynes to the corresponding (Z)-olefins in high yields. The

Method for selective synthesis of cis-olefins and trans-olefins by semi-reduction of alcohol hydrogen supply palladium-catalyzed alkynes

The invention provides a method for selective synthesis of cis-olefins and trans-olefins by semi-reduction of alcohol hydrogen supply palladium-catalyzed alkynes. The method comprises the following steps: performing alkyne reduction reaction with TEOA, NaOAc, a catalyst, alcohol and alkynes in an organic solvent and generating the cis-olefins after reaction; performing alkyne reduction reaction with a ligand, a catalyst, alcohol and alkynes in an organic solvent and generating the trans-olefins after reaction; a reactor for the reduction reaction is a sealed pressure-resistant reactor, the reduction reaction temperature is 120-150 DEG C, and the reduction reaction time is 20-48 hours; the dosage of the catalyst is 5-20 percent of the molar dosage of the alkynes, and the dosage of the alcohol is 10-100 times of the molar dosage of the alkynes; the dosage of R, R-DIPAMP is 0.5-5 times of the molar dosage of the alkynes. According to the method provided by the invention, a catalyst systemhas extremely-high chemical reaction and stereo-selectivity and can synthesize cis-olefin products or trans-olefin products with high yield; the catalyst system is good universality to a substrate, and the alkynes containing various functional groups can be efficiently subjected to the highly-selective reduction reactions.

Copper-catalysed, diboron-mediated: Cis -dideuterated semihydrogenation of alkynes with heavy water

Methods to incorporate deuterium atoms into organic molecules are valuable for the pharmaceutical industry. Here, we found that diboron reagents can efficiently mediate the transfer of two D atoms from heavy water directly onto alkynes through copper-catalysed cis-selective semihydrogenation. Avoiding the use of costly and flammable D2 gas, this safe and practical process can proceed with excellent chemoselectivity and stereoselectivity. Utilizing the present method as the key step, the formal asymmetric total synthesis of d2-deuterium-labeled cis-combretastatin A4 is demonstrated. Mechanistic studies suggest that monoborylation of alkynes is the key step for this semihydrogenation process.

Water as a Hydrogenating Agent: Stereodivergent Pd-Catalyzed Semihydrogenation of Alkynes

Palladium-catalyzed transfer semihydrogenation of alkynes using H2O as the hydrogen source and Mn as the reducing reagent is developed, affording cis- and trans-alkenes selectively under mild conditions. In addition, this method provides an efficient way to access various cis-1,2-dideuterioalkenes and trans-1,2-dideuterioalkenes by using D2O instead of H2O.

Catalytic Chemoselective and Stereoselective Semihydrogenation of Alkynes to E-Alkenes Using the Combination of Pd Catalyst and ZnI2

An efficient E-selective semihydrogenation of internal alkynes was developed under low dihydrogen pressure and low reaction temperature from commercially available reagents: Cl2Pd(PPh3)2, Zn0, and ZnI2. Kinetic studies and control experiments underline the significant role of ZnI2 in this process under H2 atmosphere, establishing that the transformation involves syn-hydrogenation followed by isomerization. This simple and easy-to-handle system provides a route to E-alkenes under mild conditions.