5405-13-0Relevant academic research and scientific papers
Stable Ni catalyst encapsulated in N-doped carbon nanotubes for one-pot reductive amination of nitroarenes with aldehydes
Cui, Penglei,Gao, Yongjun,Liu, Yaru,Shang, Ningzhao,Wang, Chun,Xu, Yuzhu
, (2021/06/07)
A novel strategy involving a popping process and carbothermal reduction was developed to create a kind of stable nickel catalyst (Ni-NC). The popping process of the mixture being composed of carbon nitride (C3N4) and nickel nitrate decomposed the nickel nitrate into nickel (oxide) nanoparticles that afterwards functioned as catalyst to grow N-containing carbon nanotubes with carbon nitride as N-containing carbon source. Finally, the nickel catalyst possessed a special structure of nanoparticles encapsulated in N-doped carbon nanotubes. This special structure is helpful to prevent nickel nanoparticles from being oxidized in air for months so that the catalyst exhibits high stability in air atmosphere. As a practical application, this encapsulated nickel catalyst exhibited excellent catalytic activity and stability in one-pot cascade reaction involving nitro-reduction and reductive amination of nitroarenes.
Cobalt encapsulated in N?doped graphene sheet for one-pot reductive amination to synthesize secondary amines
Liu, Lin,Li, Wenxiu,Qi, Ran,Zhu, Qingqing,Li, Jing,Fang, Yuzhen,Kong, Xiangjin
, (2021/03/14)
To develop an efficient base-metal reductive amination catalyst for synthesis of secondary amines is still a major challenge. In this study, an efficient N-doped graphene sheet-coated cobalt catalyst (Co@CN-800) was developed through a simple pyrolysis process, which could gave 99.5 % yield of N-benzylaniline by one-pot reductive amination of nitrobenzene with benzaldehyde during at least 5 cycles. Catalyst characterization and control experiments confirmed that the robust catalytic performance of the catalyst is probably due to the synergy effect of in situ generated Co-Nx encapsulated in N?doped graphene layer and appropriate meso-pore structure. Additionally, The substrate adaptability of the catalyst was proved since a variety of corresponding secondary amines were smoothly obtained under relatively mild conditions, which makes the secondary amine synthesis strategy based on Co@CN-800 shows excellent application prospect.
Tungsten-Catalyzed Direct N-Alkylation of Anilines with Alcohols
Lan, Xiao-Bing,Ye, Zongren,Yang, Chenhui,Li, Weikang,Liu, Jiahao,Huang, Ming,Liu, Yan,Ke, Zhuofeng
, p. 860 - 865 (2021/01/18)
The implementation of non-noble metals mediated chemistry is a major goal in homogeneous catalysis. Borrowing hydrogen/hydrogen autotransfer (BH/HA) reaction, as a straightforward and sustainable synthetic method, has attracted considerable attention in the development of non-noble metal catalysts. Herein, we report a tungsten-catalyzed N-alkylation reaction of anilines with primary alcohols via BH/HA. This phosphine-free W(phen)(CO)4 (phen=1,10-phenthroline) system was demonstrated as a practical and easily accessible in-situ catalysis for a broad range of amines and alcohols (up to 49 examples, including 16 previously undisclosed products). Notably, this tungsten system can tolerate numerous functional groups, especially the challenging substrates with sterically hindered substituents, or heteroatoms. Mechanistic insights based on experimental and computational studies are also provided.
Nickel?Copper bimetallic mesoporous nanoparticles: As an efficient heterogeneous catalyst for N-alkylation of amines with alcohols
Nasresfahani, Zahra,Kassaee, Mohamad Z.
, (2020/10/30)
A bimetallic catalyst (Ni/Cu-MCM-41) is prepared via co-condensation method. The latter is characterized by Fourier transform infrared (FT-IR), X-ray powder diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), diffuse reflectance spectroscopy (DRS), and nitrogen adsorption–desorption analysis. Catalytic performance of Ni/Cu-MCM-41 is probed in N-alkylation of amines with alcohols through a hydrogen autotransfer process. Noteworthy, this catalytic system appears very efficient for synthesis of a range of secondary and tertiary amines in good to excellent isolated yields. Moreover, the catalyst is successfully recovered and reused four times without notable decrease in its activity.
Synthesis of an Fe-Pd bimetallic catalyst for: N -alkylation of amines with alcohols via a hydrogen auto-transfer methodology
Wu, Peng-Yu,Lu, Guo-Ping,Cai, Chun
, p. 396 - 404 (2021/01/28)
Hydrogen auto-transfer (HAT) or borrowing hydrogen (BH) methodology which combines dehydrogenation, intermediate reaction and hydrogenation, is recognized as an excellent strategy for one-pot synthesis from an economic and environmental point of view. Although much effort has been made on the development of catalysts for HAT reactions, harsh conditions, external base or large amounts of noble metals are still required in most reported catalysis systems, and thus the exploration of a highly efficient and recyclable heterogeneous catalyst remains meaningful. In this work, a novel bimetallic catalyst, Fe10Pd1/NC500 derived from bimetallic MOF NH2-MIL-101(Fe10Pd1), has been prepared, and the catalyst exhibits superior catalytic performance for the N-alkylation of amines with alcohols via a hydrogen auto-transfer methodology. High yields of the desired products were achieved at 120 °C with an alcohol/amine molar ratio of 2?:?1 and required no external additive or solvent. A distinct enhancement in catalytic performance is observed when compared with monometallic catalysts, which can be ascribed to the "synergistic effects"inside the bimetallic alloys. The N-doped carbon support has been revealed to provide the necessary basicity which avoids the requirement of an external base. Moreover, a wide substrate range and remarkable reusability have been shown by Fe10Pd1/NC500, and this work highlights new possibilities for bimetallic catalysts applied in sustainable chemistry.
Effect of the ancillary ligand in N-heterocyclic carbene iridium(III) catalyzed N-alkylation of amines with alcohols
Feng, Xinshu,Huang, Ming
, (2021/06/21)
A series of air-stable N-heterocyclic carbene (NHC) Ir(III) complexes (Ir1-6), bearing various combinations of chlorine, pyridine and NHC ligands, were assayed for the N-alkylation of amines with alcohols. It was found that Ir3, with two monodentate 1,3-bis-methyl-imidazolylidene (IMe) ligands, emerged as the most active complex. A large variety of amines and primary alcohols were efficiently converted into mono-N-alkylated amines in 53–96% yields. As a special highlight, for the challenging MeOH, selective N-monomethylation could be achieved using KOH as a base under an air atmosphere. Moreover, this catalytic system was successfully applied to the gram-scale synthesis of some valuable compounds.
[(PPh3)2NiCl2]-Catalyzed C-N bond formation reaction via borrowing hydrogen strategy: Access to diverse secondary amines and quinolines
Donthireddy,Pandey, Vipin K.,Rit, Arnab
, p. 6994 - 7001 (2021/06/09)
Commercially available [(PPh3)2NiCl2] was found to be an efficient catalyst for the mono-N-alkylation of (hetero)- A romatic amines, employing alcohols to deliver diverse secondary amines, including the drug intermediates chloropyramine (5b) and mepyramine (5c), in excellent yields (up to 97%) via the borrowing hydrogen strategy. This method shows a superior activity (TON up to 10000) with a broad substrate scope at a low catalyst loading of 1 mol % and a short reaction time. Further, this strategy is also successful in accessing various quinoline derivatives following the acceptorless dehydrogenation pathway.
Cooperative catalysis of molybdenum with organocatalysts for distribution of products between amines and imines
Wu, Di,Bu, Qingqing,Guo, Cheng,Dai, Bin,Liu, Ning
, (2021/02/02)
Multi-amino groups and nitrogen donors compound was discovered as an organocatalyst for N-alkylation of alcohols with amines in the presence of Mo(CO)6. The Mo(CO)6/organocatalyst binary system has shown to be a highly active catalyst for the N-alkylation reaction between alcohols and amines with excellent tolerance of variable starting materials bearing different functional groups. Of particular note, this method possessing a superiority selectivity in the synthesis of N-alkylated amines or imines, which can be controlled by the reaction temperature. The cooperative catalysis mechanism in combination of Mo(CO)6 with organocatalyst was elucidated by control experiments.
Iron-Catalyzed Oxidative Amination of Benzylic C(sp3)–H Bonds with Anilines
Song, Yan-Ling,Li, Bei,Xie, Zhen-Biao,Wang, Dan,Sun, Hong-Mei
, p. 17975 - 17985 (2021/12/13)
Iron-catalyzed oxidative amination of benzylic C(sp3)–H bonds with anilines bearing electron-withdrawing groups (EWGs) or electron-donating groups (EDGs) is realized based on simple variations of N-substituents on imidazolium cations in novel ionic Fe(III) complexes. The structural modification of the imidazolium cation resulted in regulation of the redox potential and the catalytic performance of the iron metal center. Using DTBP as oxidant, [HItBu][FeBr4] showed the highest catalytic activity for anilines bearing EWGs, while [HIPym][FeBr4] was more efficient for EDG-substituted anilines. This work provides alternative access to benzylamines with the advantages of both a wide substrate scope and iron catalysis.
Photocatalytic one-pot multidirectional N-alkylation over Pt/D-TiO2/Ti3C2: Ti3C2-based short-range directional charge transmission
Jiang, Heyan,Sheng, Meilin,Li, Yue,Kong, Shuzhen,Bian, Fengxia
, (2021/05/17)
Visible-light-induced one-pot, multistep, and chemoselectivity adjustable reactions highlight the economical, sustainable, and green process. Herein, we report Pt nanoparticles dispersed on S and N co-doped titanium dioxide/titanium carbide (MXene) (3%Pt/
