6165-40-8Relevant academic research and scientific papers
Low-Temperature Hypergolic Ignition of 1-Octene with Low Ignition Delay Time
Sheng, Haoqiang,Huang, Xiaobin,Chen, Zhijia,Zhao, Zhengchuang,Liu, Hong
, p. 423 - 434 (2021/02/05)
The attainment of the efficient ignition of traditional liquid hydrocarbons of scramjet combustors at low flight Mach numbers is a challenging task. In this study, a novel chemical strategy to improve the reliable ignition and efficient combustion of hydrocarbon fuels was proposed. A directional hydroboration reaction was used to convert hydrocarbon fuel into highly active alkylborane, thereby leading to changes in the combustion reaction pathway of hydrocarbon fuel. A directional reaction to achieve the hypergolic ignition of 1-octene was designed and developed by using Gaussian simulation. Borane dimethyl sulfide (BDMS), a high-energy additive, was allowed to react spontaneously with 1-octene to achieve the hypergolic ignition of liquid hydrocarbon fuel at -15 °C. Compared with the ignition delay time of pure 1-octene (565 °C), the ignition delay time of 1-octene/BDMS (9:1.2) decreased by 3850% at 50 °C. Fourier transform infrared spectroscopy and gas chromatography-mass spectrometry confirmed the directional reaction of the hypergolic ignition reaction pathway of 1-octene and BDMS. Moreover, optical measurements showed the development trend of hydroxyl radicals (OH·) in the lower temperature hypergolic ignition and combustion of 1-octene. Finally, this study indicates that the enhancement of the low-temperature ignition performance of 1-octene by hydroboration in the presence of BDMS is feasible and promising for jet propellant design with tremendous future applications.
Absolute rate constants for the addition of atomic hydrogen to monosubstituted and trisubstituted olefins
Tanner, Dennis D.,Zhang, Liying,Kandanarachchi, Pramod
, p. 11319 - 11324 (2007/10/03)
A mechanism is established for the formation of the products resulting from the solution phase regioselective addition of atomic hydrogen to 1-methylcyclohexene. From this data and new data for the reactions of 1-octene, the absolute rates and activation parameters for the addition of hydrogen atom to an olefin can be extracted. A method was established to determine the absolute rate of addition of a hydrogen atom to a terminal olefin in the solution phase. The addition rate constants, ka (25°C), to 1-octene [ka = (4.2 ± 3.6) × 109 M-1 s-1] and 1-methylcyclohexene [ka = (4.6 ± 0.8) × 106 M-1 s-1, -78°C] are found to be in reasonable agreement with the published values for the vapor phase rate of addition to ethylene. The large rate constants are supported by the observation that the activation parameters (Ea = 5.3 ± 2.9 kcal/mol and log A = 14 ± 3.5 M-1 s-1 for 1-octene) are consistent with the values expected for this fast reaction.
Regioselective addition of atomic hydrogen to olefins. Reversible 1-methyl-5-hexenyl radical cyclization in the solution-phase hydrogenation
Tanner, Dennis D.,Zhang, Liying
, p. 6683 - 6689 (2007/10/02)
The solution-phase reactions of microwave-generated hydrogen atoms with terminal olefins is regioselective. Since addition is to the terminal end of the olefin, the reaction yields a secondary radical which undergoes either reaction with molecular or atomic hydrogen, disproportionation, combination, or addition to another olefin, and in the case of hydrogen atom addition to 1,6-heptadiene, cyclization. The cyclized radicals are formed reversibly, and the final product mixture contains only minor amounts of cis-1,2-dimethylcyclopentane (the product of kinetic control) while the major cyclized product is methylcyclohexane. Although an equilibrium mixture could not be obtained, the dimethylcyclopentyl and 3-methylcyclohexyl radicals were shown to be formed reversibly.
Anodic Oxidation of Organoboranes
Schlegel, Guenter,Schaefer, Hans J.
, p. 1400 - 1423 (2007/10/02)
Organoboranes are converted into more easily oxidizable borates by reaction with nucleophiles and the alkyl groups are dimerized by anodic oxidation.The oxidation potentials (Ep) of the borates depend strongly on the nature of the complexing nucleophile, for instance Ep = +0.37 V (vs.SCE) with OH- or +1.65 V with tetrahydrofuran.The dimer yields are optimized with trioctylborane (5) by variation of the electrode material and the elctrolyte.At the platinum anode in sodium hydroxide-methanol/tetrahydrofuran yields of 80percent are obtained for acyclic alkyl groups, and lo wer ones for cycloalkyl groups.They exceed those obtained by the Kolbe electrolysis or the oxidation with neutral hydrogen peroxide and they are comparable to those of the AgNO3 oxidation. - The selective preparation of unsymmetrical products from borates with different alkyl groups is not possible, the dimerization proceeds likely via free radicals that couple statistically.Good yields of unsymmetrical coupling products are achieved, when one olefin is used in excess.With choro-, ethoxy-, acetoxy-, and aryl-substituted alkyl groups the dimers are obtained in 21 - 66percent yield, with bromide the yield are lower and with nitriles the dimerization fails.
