Welcome to LookChem.com Sign In|Join Free
  • or
N-(4-IODOPHENYL)SUCCINIMIDE is a chemical with a specific purpose. Lookchem provides you with multiple data and supplier information of this chemical.

94590-85-9

Post Buying Request

94590-85-9 Suppliers

Recommended suppliers

  • Product
  • FOB Price
  • Min.Order
  • Supply Ability
  • Supplier
  • Contact Supplier

94590-85-9 Usage

Check Digit Verification of cas no

The CAS Registry Mumber 94590-85-9 includes 8 digits separated into 3 groups by hyphens. The first part of the number,starting from the left, has 5 digits, 9,4,5,9 and 0 respectively; the second part has 2 digits, 8 and 5 respectively.
Calculate Digit Verification of CAS Registry Number 94590-85:
(7*9)+(6*4)+(5*5)+(4*9)+(3*0)+(2*8)+(1*5)=169
169 % 10 = 9
So 94590-85-9 is a valid CAS Registry Number.
InChI:InChI=1/C10H8INO2/c11-7-1-3-8(4-2-7)12-9(13)5-6-10(12)14/h1-4H,5-6H2

94590-85-9SDS

SAFETY DATA SHEETS

According to Globally Harmonized System of Classification and Labelling of Chemicals (GHS) - Sixth revised edition

Version: 1.0

Creation Date: Aug 20, 2017

Revision Date: Aug 20, 2017

1.Identification

1.1 GHS Product identifier

Product name 1-(4-iodophenyl)pyrrolidine-2,5-dione

1.2 Other means of identification

Product number -
Other names N-(4-Jod-phenyl)-succinimid

1.3 Recommended use of the chemical and restrictions on use

Identified uses For industry use only.
Uses advised against no data available

1.4 Supplier's details

1.5 Emergency phone number

Emergency phone number -
Service hours Monday to Friday, 9am-5pm (Standard time zone: UTC/GMT +8 hours).

More Details:94590-85-9 SDS

94590-85-9Downstream Products

94590-85-9Relevant academic research and scientific papers

Studies of hydrogen isotope scrambling during the dehalogenation of aromatic chloro-compounds with deuterium gas over palladium catalysts

Lockley, William J.S.,Venanzi, Niccolò A. E.,Crane, Georgie J.

, p. 531 - 552 (2020/09/22)

Catalytic dehalogenation of aromatic halides using isotopic hydrogen gas is an important strategy for labelling pharmaceuticals, biochemicals, environmental agents and so forth. To extend, improve and further understand this process, studies have been carried out on the scrambling of deuterium isotope with protium during the catalytic deuterodehalogenation of model aryl chlorides using deuterium gas and a palladium on carbon catalyst in tetrahydrofuran solution. The degree of scrambling was greatest with electron-rich chloroarene rings. The tetrahydrofuran solvent and the triethylamine base were not the source of the undesired protium; instead, it arose, substantially, from the water content of the catalyst, though other sources of protium may also be present on the catalyst. Replacement of the Pd/C catalyst with one prepared in situ by reduction of palladium trifluoroacetate with deuterium gas and dispersed upon micronised polytetrafluoroethylene led to much reduced scrambling (typically 0–6% compared with up to 40% for palladium on carbon) and to high atom% abundance, regiospecific labelling. The improved catalytic system now enables efficient polydeuteration via the dehalogenation of polyhalogenated precursors, making the procedure viable for the preparation of MS internal standards and, potentially, for high specific activity tritium labelling.

Reduction of Activated Alkenes by PIII/PV Redox Cycling Catalysis

Longwitz, Lars,Werner, Thomas

supporting information, p. 2760 - 2763 (2020/02/05)

The carbon–carbon double bond of unsaturated carbonyl compounds was readily reduced by using a phosphetane oxide catalyst in the presence of a simple organosilane as the terminal reductant and water as the hydrogen source. Quantitative hydrogenation was observed when 1.0 mol % of a methyl-substituted phosphetane oxide was employed as the catalyst. The procedure is highly selective towards activated double bonds, tolerating a variety of functional groups that are usually prone to reduction. In total, 25 alkenes and two alkynes were hydrogenated to the corresponding alkanes in excellent yields of up to 99 %. Notably, less active poly(methylhydrosiloxane) could also be utilized as the terminal reductant. Mechanistic investigations revealed the phosphane as the catalyst resting state and a protonation/deprotonation sequence as the crucial step in the catalytic cycle.

Comparison of copper(II) acetate promoted N-arylation of 5,5-dimethyl hydantoin and other imides with triarylbismuthanes and aryl boronic acids

Hügel, Helmut M.,Rix, Colin J.,Fleck, Karin

, p. 2290 - 2292 (2007/10/03)

This work demonstrates that the copper acetate promoted N-arylation of imides with boronic acids can be employed as a major method for the synthesis of N3-aryl hydantoins. Georg Thieme Verlag Stuttgart.

Post a RFQ

Enter 15 to 2000 letters.Word count: 0 letters

Attach files(File Format: Jpeg, Jpg, Gif, Png, PDF, PPT, Zip, Rar,Word or Excel Maximum File Size: 3MB)

1 Customer Service

What can I do for you?
Get Best Price

Get Best Price for 94590-85-9