Basic Information | Post buying leads | Suppliers | Cas Database |
Name |
Ammonium L-tartrate |
EINECS | 221-618-9 |
CAS No. | 3164-29-2 | Density | 1.601 g/mL at 25 °C(lit.) |
PSA | 120.72000 | LogP | -4.03960 |
Solubility | 63 g/L (15 °C) in water | Melting Point |
decomposes [CRC10] |
Formula | C4H12O6N2 | Boiling Point | 399.3 °C at 760 mmHg |
Molecular Weight | 184.149 | Flash Point | 209.4 °C |
Transport Information | N/A | Appearance | white crystalline powder |
Safety | 24/25-36-26 | Risk Codes | 20/21/22-36/37/38 |
Molecular Structure | Hazard Symbols | Xn | |
Synonyms |
Ammoniumtartrate ((NH4)2O6C4H4) (6CI,7CI);Butanedioic acid, 2,3-dihydroxy- (2R,3R)-,diammonium salt (9CI);Butanedioic acid, 2,3-dihydroxy- [R-(R*,R*)]-,diammonium salt;Tartaric acid, diammonium salt (8CI);Ammonium d-tartrate;Ammonium tartrate;Diammonium L-(+)-tartrate;Diammonium d-tartrate;Diammoniumtartrate;L-Tartaric acid ammonium salt; |
Article Data | 2 |
A
(1S,4R)-(-)-methyl-4-aminocyclopent-2-en-1-carboxylate hydrochloride
B
diammonium tartate
Conditions | Yield |
---|---|
With ammonia In methanol; water at 20℃; for 1h; Product distribution / selectivity; |
A
(+)-(1R,2R)-trans-1,2,3,4-tetrahydro-1-(methylamino)2-naphthalenol
B
diammonium tartate
Conditions | Yield |
---|---|
With ammonium hydroxide; sodium chloride In tert-butyl methyl ether; water pH=> 8; |
diammonium tartate
Conditions | Yield |
---|---|
In methanol for 5h; Heating; |
1-hexylamine hydrochloride
diammonium tartate
(R,R)-(+)-di-N,N'-hexyltartramide
Conditions | Yield |
---|---|
at 20 - 180℃; for 0.416667h; microwave irradiation; |
Reported in EPA TSCA Inventory.
The Diammonium tartrate, with the CAS registry number 3164-29-2 and EINECS registry number 221-618-9, has the systematic name of (2R,3R)-2,3-dihydroxybutanedioic acid diammoniate. And the molecular formula of this chemical is C4H12O6N2. It is a kind of white crystalline powder, and belongs to the product category of Industrial/Fine Chemicals.
The physical properties of Diammonium tartrate are as following: (1)ACD/LogP: -1.43; (2)# of Rule of 5 Violations: 0; (3)ACD/LogD (pH 5.5): -5.86; (4)ACD/LogD (pH 7.4): -6.18; (5)ACD/BCF (pH 5.5): 1; (6)ACD/BCF (pH 7.4): 1; (7)ACD/KOC (pH 5.5): 1; (8)ACD/KOC (pH 7.4): 1; (9)#H bond acceptors: 6; (10)#H bond donors: 4; (11)#Freely Rotating Bonds: 5; (12)Polar Surface Area: 71.06 Å2; (13)Flash Point: 209.4 °C; (14)Enthalpy of Vaporization: 75.13 kJ/mol; (15)Boiling Point: 399.3 °C at 760 mmHg; (16)Vapour Pressure: 4.93E-08 mmHg at 25°C.
Preparation and uses of Diammonium tartrate: Pass ammonia gas to ethanol solution which tartaric acid is dissolved. And it will give amorphous powdered precipitation. Filter and wash with ethanol and aether, then you can get the product after drying. In addition, it can be used as intermediate for analytical reagent and organic synthesis. And it is also used in pharmaceuticals industry.
You should be cautious while dealing with this chemical. It irritates eyes, respiratory system and skin, and it is also Harmful by inhalation, in contact with skin and if swallowed. Therefore, you had better take the following instructions: Wear suitable protective clothing, and in case of contacting with eyes, rinse immediately with plenty of water and seek medical advice; Avoid contact with skin and eyes; Avoid contact with skin and eyes.
You can still convert the following datas into molecular structure:
(1)SMILES: O=C(O)[C@H](O)[C@@H](O)C(=O)O.N.N
(2)InChI: InChI=1/C4H6O6.2H3N/c5-1(3(7)8)2(6)4(9)10;;/h1-2,5-6H,(H,7,8)(H,9,10);2*1H3/t1-,2-;;/m1../s1
(3)InChIKey: NGPGDYLVALNKEG-OLXYHTOABR
The toxicity data is as follows:
Organism | Test Type | Route | Reported Dose (Normalized Dose) | Effect | Source |
---|---|---|---|---|---|
rabbit | LD50 | intravenous | 113mg/kg (113mg/kg) | "Abdernalden's Handbuch der Biologischen Arbeitsmethoden." Vol. 4, Pg. 1289, 1935. | |
rabbit | LD50 | subcutaneous | 1130mg/kg (1130mg/kg) | "Abdernalden's Handbuch der Biologischen Arbeitsmethoden." Vol. 4, Pg. 1289, 1935. |