10436-83-6Relevant articles and documents
Leaving Group Effects in Thiolester Hydrolysis. Part 2. On the Possibility of an Elimination-Addition (Keten) Mediated Pathway in S-Acetylcoenzyme A Basic Hydrolysis and Acetyl Transfer
Douglas, Kenneth T.,Yaggi, Norbert F.,Mervis, Cynthia M.
, p. 171 - 174 (1981)
Alkaline hydrolysis rates (kHO(1-)) at 25 deg C in aqueous solution for a series of S-alkyl and S-aryl thiolacetates, including S-acetylcoenzyme A, were correlated (as their logarithms) with the pKa of the conjugate acid of the thiolate leaving group to give a slope (βl.g.) of -0.33.In comparison with the corresponding oxygen esters, thiolesters are, for the basicity of a given leaving species, one to two orders of magnitude less reactive towards hydroxide ion and show little dispersion into aryl and alkyl leaving groups, ascribed to the lower steric sensitivity of thiolacetate esters compared with the oxygen analogues.The small value of βl.g. and the lower reactivity of S- than O-esters are offered as evidence of a bimolecular associative (BAc2) mechanism for basic hydrolysis.The E2 route is excluded by the lack of deuterium incorporation into the (acetate) product of hydrolysis.In spite of the accepted acidity of thiolacetates, a kinetically insignificant amount of ester conjugate base is formed in aqueous solution even at high, non-physiological pH and thus S-acetylcoenzyme A does not hydrolyse by an E1cB pathway.
Ruthenium(III) chloride catalyzed acylation of alcohols, phenols, and thiols in room temperature Ionic liquids
Xi, Zhiwen,Hao, Wenyan,Wang, Pingping,Cai, Mingzhong
, p. 3528 - 3537 (2009)
Ruthenium(III) chloride-catalyzed acylation of a variety of alcohols, phenols, and thiols was achieved in high yields under mild conditions (room temperature) in the ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF6]). The ionic liquid and ruthenium catalyst can be recycled at least 10 times. Our system not only solves the basic problem of ruthenium catalyst reuse, but also avoids the use of volatile acetonitrile as solvent.
Photooxygenation of vinyl sulfides: Substituent effects on the [2+2] cycloaddition versus Schenck ene reaction modes
Adam, Waldemar,Sampath Kumar,Saha-Moeller, Chantu R.
, p. 7853 - 7854 (1995)
Electron-accepting substituents at the para position of aryl vinyl sulfides 1 promote the ene reaction with singlet oxygen in competition with the usual [2+2] cycloaddition, while electron-donating substituents afford exclusively dioxetane product, which through their thermally labile nature decompose by C-C cleavage to the corresponding carbonyl fragments.
NiNP@rGO Nanocomposites as Heterogeneous Catalysts for Thiocarboxylation Cross-Coupling Reactions
Bandini, Marco,Bertuzzi, Giulio,Gazzano, Massimo,Kovtun, Alessandro,Lombardi, Lorenzo,Mazzaro, Raffaello,Morandi, Vittorio
, (2021/12/17)
A new type of ligand-free Ni-nanoparticles supported on rGO (size distribution average d = 9 ± 3 nm) was prepared and fully characterized via morphological (Fe-SEM), structural (P-XRD, HR-TEM), and spectroscopic (ICP-EOS, XPS) analysis tools. The metal composite was effectively employed in the unprecedented heterogeneously Ni-assisted cross-coupling reaction of aryl/vinyl iodides and thiocarboxylates. A range of sulfur-containing aryl as well as vinyl derivatives (15 examples) was achieved in high yields (up to 82%), under mild reaction conditions, and with wide functional group tolerance.
Methanesulfonic anhydride-promoted sustainable synthesis of thioesters from feedstock acids and thiols
Singh, Pallavi,Peddinti, Rama Krishna
, (2021/02/22)
Abstract: An unprecedented metal-, halogen- and solvent-free, MSAA-promoted S-carbonylation of thiols with feedstock acids has been developed. This new transformation provides an efficient and atom-economic strategy for the synthesis of thioesters in a single operation from readily available and inexpensive starting materials. The reaction avoids the use of expensive and hazardous coupling reagents, bases and generates water as the only by-product, thus making this chemical synthetic process more viable, environment-friendly and contributing towards sustainable chemistry. Graphic abstract: [Figure not available: see fulltext.].
Magnetically recyclable silica-coated ferrite magnetite-K10montmorillonite nanocatalyst and its applications in O, N, and S-acylation reaction under solvent-free conditions
Kumar, Pushpendra,Patil, Shripad M.,Tandon, Nitin,Tandon, Runjhun
, p. 21291 - 21300 (2021/07/01)
Novel silica-coated ferrite nanoparticles supported with montmorillonite (K10) have been prepared successfully by using a simple impregnation method. Further, these nanoparticles were characterized by using different analytical methods like FT-IR, PXRD, EDS, and FE-SEM techniques. In addition, these nanoparticles have been explored for their catalytic activity for the O, N, and S-acylation reactions under solvent-free conditions which gave moderate to excellent yields in a much shorter reaction time. Moreover, these nanoparticles could easily be separated out from the reaction medium after the reaction completion by using an external magnetic field and have been re-used for 10 cycles without any significant loss of the catalytic activity.
Unsymmetrical Disulfides Synthesis via Cs2CO3-Catalyzed Three-Component Reaction in Water
Wang, Dungai,Gao, Yuanji,Tong, Yunli,Xiong, Mingteng,Liang, Xiao,Zhu, Heping,Pan, Yuanjiang
supporting information, p. 4991 - 4995 (2020/09/23)
An unsymmetrical disulfides synthesis by Cs2CO3-catalyzed three-component coupling reaction of thioacetate, sodium thiosulfate, and benzyl halide in water is described. The safe, stable, and non-toxic Na2S2O3 was invoked as the sulfur-source, successfully avoiding the odor generation in the process of S?S bond formation. A wide range of substrate suitability and appropriate functional group tolerance were observed for the transformation. Notably, the approach reported here was compatible with various biomolecules including glucose, coumarin, and quinolinone. (Figure presented.).
Air-stable binuclear Titanium(IV) salophen perfluorobutanesulfonate with zinc power catalytic system and its application to C–S and C–Se bond formation
Wang, Lingxiao,Qiao, Jie,Wei, Jiancong,Liang, Zhiwu,Xu, Xinhua,Li, Ningbo
, (2020/01/08)
An air-stable μ-oxo-bridged binuclear Lewis acid of titanium(IV) salophen perfluorobutanesulfonate [{Ti(salophen)H2O}2O][OSO2C4F9]2 (1) was successfully synthesized by the reaction of TiIV(salophen)Cl2 with AgOSO2C4F9 and characterized by techniques such as IR, NMR and HRMS. This complex was stable open to air over a year, and exhibited good thermal stability and high solubility in polar organic solvents. The complex also had relatively strong acidity with a strength of 0.8 Ho ≤ 3.3, and showed high catalytic efficiency towards various C–S and C–Se bond formations in the presence of zinc power. This catalytic system affords a mild and efficient approach to synthesis of thio- and selenoesters, α-arylthio- and seleno-carbonyl compounds, and thio- and selenoethers.
Fungicidal Activity of S-Esters of Thiocarboxylic Acids as Antimicrobial Additives to Petroleum Products
Aliev,Belovezhets,Oparina
, p. 99 - 105 (2019/04/27)
Abstract: A variety of aliphatic and aromatic S-esters of thiocarboxylic acids have been tested for antimicrobial activity. The relationship between the chemical structure of the compounds R1SC(O)R2 and their toxicity for microorganisms has been revealed, and the effect of various functional groups on the antimicrobial properties has been shown. The cooling lubricant IKhP-45E with S-aryl thioacetate additives has been tested. It has been shown that the additives used (0.25–0.5 wt %) inhibit the growth of all the studied microorganisms; however, their activity with respect to fungi is higher. The introduction of S-aryl thioacetates provides the resistance of these oils to microbiological deterioration to retain the physicochemical properties for a long period of time.
Air-Tolerant Direct Thiol Esterification with Carboxylic Acids Using Hydrosilane via Simple Inorganic Base Catalysis
Xuan, Maojie,Lu, Chunlei,Liu, Meina,Lin, Bo-Lin
, p. 7694 - 7701 (2019/06/27)
Direct thioesterification of carboxylic acids with thiols using nontoxic activation agents is highly desirable. Herein, an efficient and practical protocol using safe and inexpensive industrial waste polymethylhydrosiloxane as the activation agent and K3PO4 with 18-crown-6 as a catalyst is described. Various functional groups on carboxylic acid and thiol substituents can be tolerated by the present system to afford thioesters in yields of 19-100%.
