823-78-9Relevant articles and documents
Synthesis, inhibition properties against xanthine oxidase and molecular docking studies of dimethyl N-benzyl-1H-1,2,3-triazole-4,5-dicarboxylate and (N-benzyl-1H-1,2,3-triazole-4,5-diyl)dimethanol derivatives
Yagiz, Güler,Noma, Samir Abbas Ali,Altundas, Aliye,Al-khafaji, Khattab,Taskin-Tok, Tugba,Ates, Burhan
, (2021/01/28)
This study focused on synthesis various dimethyl N-benzyl-1H-1,2,3-triazole-4,5-dicarboxylate and (N-benzyl-1H-1,2,3-triazole-4,5-diyl)dimethanol derivatives under the conditions of green chemistry without the use of solvent and catalysts. Their inhibition properties were also investigated on xanthine oxidase (XO) activity. All dimethanol and dicarboxylate derivatives exhibited significant inhibition activities with IC50 values ranging from 0.71 to 2.25 μM. Especially, (1-(3-bromobenzyl)-1H-1,2,3-triazole-4,5-diyl)dimethanol (5c) and dimethyl 1-(4-chlorobenzyl)-1H-1,2,3-triazole-4,5-dicarboxylate (6 g) compounds were found to be the most promising derivatives on the XO enzyme inhibition with IC50 values 0.71 and 0.73 μM, respectively. Moreover, the double docking procedure was to evaluate compound modes of inhibition and their interactions with the protein (XO) at atomic level. Surprisingly, the docking results showed a good correlation with IC50 [correlation coefficient (R2 = 0.7455)]. Also, the docking results exhibited that the 5c, 6f and 6 g have lowest docking scores ?4.790, ?4.755, and ?4.730, respectively. These data were in agreement with the IC50 values. These results give promising beginning stages to assist in the improvement of novel and powerful inhibitor against XO.
THERAPEUTIC COMPOUNDS AND METHODS TO TREAT INFECTION
-
Paragraph 0422-0423, (2019/02/13)
Disclosed herein are compounds of formula I: or a salt thereof and compositions comprising a compound of formula I or a pharmaceutically acceptable salt thereof. Also disclosed herein are methods for treating or preventing a bacterial infection in an animal comprising administering to the animal a compound of formula I or a pharmaceutically acceptable salt thereof, alone or in combination with a bacterial efflux pump inhibitor.
Design, synthesis and biological evaluation of low molecular weight CXCR4 ligands
Sakyiamah, Maxwell M.,Kobayakawa, Takuya,Fujino, Masayuki,Konno, Makoto,Narumi, Tetsuo,Tanaka, Tomohiro,Nomura, Wataru,Yamamoto, Naoki,Murakami, Tsutomu,Tamamura, Hirokazu
supporting information, p. 1130 - 1138 (2019/02/16)
The chemokine receptor CXCR4/stromal cell-derived factor-1 (SDF-1: CXCL12) signaling axis represents a crucial drug target due to its relevance to several diseases such as HIV-1 infection, cancer, leukemia, and rheumatoid arthritis. With the aim of enhancing the binding affinity and anti-HIV activity of a potent CXCR4 ligand as a lead, 23 low molecular weight compounds containing dipicolylamine (Dpa) and cyclam cationic moieties with varying spacers and spatial positioning were designed, synthesized and biologically evaluated. All of the synthesized compounds screened at 1.0 μM in the NanoBRET assay system exhibited >70% inhibition of the binding of a competitive probe TAMRA-Ac-TZ14011 (10 nM) to CXCR4 in the presence of zinc (II) ion. Furthermore, selected compounds 3, 8, 9, 19 and 21 with spatial distances between the next carbon to Dpa and the next carbon to cyclam within the range of 6.5–7.5 ? showed potent binding affinity selective for CXCR4 with IC50 values of 1.6, 7.9, 5.7, 3.5 and 4.5 nM, respectively, with corresponding high anti-HIV activity with EC50s of 28, 13, 21, 28 and 61 nM, respectively, in the presence of zinc (II) ion. Some compounds with remarkably more potent CXCR4-binding affinity than that of an initial lead were obtained. These compounds interact with different but overlapping amino acid residues of CXCR4. The present studies have developed new low molecular weight CXCR4 ligands with high CXCR4-binding and anti-HIV activities, which open avenue into the development of more potent CXCR4 ligands.
Halogenation through Deoxygenation of Alcohols and Aldehydes
Chen, Jia,Lin, Jin-Hong,Xiao, Ji-Chang
supporting information, p. 3061 - 3064 (2018/05/28)
An efficient reagent system, Ph3P/XCH2CH2X (X = Cl, Br, or I), was very effective for the deoxygenative halogenation (including fluorination) of alcohols (including tertiary alcohols) and aldehydes. The easily available 1,2-dihaloethanes were used as key reagents and halogen sources. The use of (EtO)3P instead of Ph3P could also realize deoxy-halogenation, allowing for a convenient purification process, as the byproduct (EtO)3Pa?O could be removed by aqueous washing. The mild reaction conditions, wide substrate scope, and wide availability of 1,2-dihaloethanes make this protocol attractive for the synthesis of halogenated compounds.
Silver-Catalyzed Decarboxylative Bromination of Aliphatic Carboxylic Acids
Tan, Xinqiang,Song, Tao,Wang, Zhentao,Chen, He,Cui, Lei,Li, Chaozhong
supporting information, p. 1634 - 1637 (2017/04/11)
The silver-catalyzed Hunsdiecker bromination of aliphatic carboxylic acids is described. With Ag(Phen)2OTf as the catalyst and dibromoisocyanuric acid as the brominating agent, various aliphatic carboxylic acids underwent decarboxylative bromination to provide the corresponding alkyl bromides under mild conditions. This method not only is efficient and general but also enjoys wide functional group compatibility. An oxidative radical mechanism involving Ag(II) intermediates is proposed.
Generation of α-imino gold carbenes through gold-catalyzed intermolecular reaction of azides with ynamides
Shu, Chao,Wang, Yong-Heng,Zhou, Bo,Li, Xin-Ling,Ping, Yi-Fan,Lu, Xin,Ye, Long-Wu
supporting information, p. 9567 - 9570 (2015/08/18)
The generation of α-imino gold carbenes via gold-catalyzed intermolecular reaction of azides and ynamides is disclosed. This new methodology allows for highly regioselective access to valuable 2-aminoindoles and 3-amino-β-carbolines in generally good to excellent yields. A mechanistic rationale for this tandem reaction, especially for the observed high regioselectivity, is supported by DFT calculations.
A scalable procedure for light-induced benzylic brominations in continuous flow
Cantillo, David,De Frutos, Oscar,Rincon, Juan A.,Mateos, Carlos,Oliver Kappe
supporting information, p. 223 - 229 (2014/01/17)
A continuous-flow protocol for the bromination of benzylic compounds with N-bromosuccinimide (NBS) is presented. The radical reactions were activated with a readily available household compact fluorescent lamp (CFL) using a simple flow reactor design based on transparent fluorinated ethylene polymer (FEP) tubing. All of the reactions were carried out using acetonitrile as the solvent, thus avoiding hazardous chlorinated solvents such as CCl4. For each substrate, only 1.05 equiv of NBS was necessary to fully transform the benzylic starting material into the corresponding bromide. The general character of the procedure was demonstrated by brominating a diverse set of 19 substrates containing different functional groups. Good to excellent isolated yields were obtained in all cases. The novel flow protocol can be readily scaled to multigram quantities by operating the reactor for longer time periods (throughput 30 mmol h-1), which is not easily possible in batch photochemical reactors. The bromination protocol can also be performed with equal efficiency in a larger flow reactor utilizing a more powerful lamp. For the bromination of phenylacetone as a model, a productivity of 180 mmol h -1 for the desired bromide was achieved.
One-pot transformation of methylarenes into aromatic aldehydes under metal-free conditions
Tabata, Masayuki,Moriyama, Katsuhiko,Togo, Hideo
, p. 3402 - 3410 (2014/06/09)
On the basis of studies of the transformation of benzylic bromides into the corresponding aromatic aldehydes by treatment with N-methylmorpholine N-oxide, various methylarenes were treated either with DBDMH in the presence of AIBN in acetonitrile at reflux (Method A) or with NBS in CCl4 under irradiation with a tungsten lamp at 30 °C (Method B), followed by treatment with N-methylmorpholine N-oxide to provide aromatic aldehydes in good yields. These methods could be adopted in one-pot transformations of methylarenes into aromatic aldehydes under conditions free of less toxic reagents and transition metals. Copyright
Antitrypanosomal lead discovery: Identification of a ligand-efficient inhibitor of Trypanosoma cruzi CYP51 and parasite growth
Andriani, Grasiella,Amata, Emanuele,Beatty, Joel,Clements, Zeke,Coffey, Brian J.,Courtemanche, Gilles,Devine, William,Erath, Jessey,Juda, Cristin E.,Wawrzak, Zdzislaw,Wood, Jodianne T.,Lepesheva, Galina I.,Rodriguez, Ana,Pollastri, Michael P.
, p. 2556 - 2567 (2013/05/09)
Chagas disease is caused by the intracellular protozoan parasite Trypanosomal cruzi, and current drugs are lacking in terms of desired safety and efficacy profiles. Following on a recently reported high-throughput screening campaign, we have explored initial structure-activity relationships around a class of imidazole-based compounds. This profiling has uncovered compounds 4c (NEU321) and 4j (NEU704), which are potent against in vitro cultures of T. cruzi and are greater than 160-fold selective over host cells. We report in vitro drug metabolism and properties profiling of 4c and show that this chemotype inhibits the T. cruzi CYP51 enzyme, an observation confirmed by X-ray crystallographic analysis. We compare the binding orientation of 4c to that of other, previously reported inhibitors. We show that 4c displays a significantly better ligand efficiency and a shorter synthetic route over previously disclosed CYP51 inhibitors, and should therefore be considered a promising lead compound for further optimization.
Direct oxidative conversion of methylarenes into aromatic nitriles
Tsuchiya, Daisuke,Kawagoe, Yuhsuke,Moriyama, Katsuhiko,Togo, Hideo
supporting information, p. 4194 - 4197 (2013/09/12)
A variety of methylarenes were successfully converted into the corresponding aromatic nitriles in good to moderate yields by the treatment with NBS or DBDMH in the presence of a catalytic amount of AIBN or BPO, followed by the reaction with molecular iodine in aq NH3 in a one-pot procedure. The present reaction is a useful and practical transition-metal-free method for the preparation of aromatic nitriles from methylarenes.
