112809-51-5Relevant articles and documents
A novel process for the synthesis of substantially pure Letrozole
Suman,Vijayabhaskar,NageswaraRao,Syam Kumar,VenkateswaraRao
, p. 1 - 8 (2019)
This article demonstrates an improved novel and practical synthesis of oral non-steroidal aromatase inhibitor (AI) Letrozole in a five-stage synthetic process in excellent yields. Key steps of the synthesis involve the condensation of 4-(chloro(4-cyanophenyl)methyl)benzamide with 1H-1,2,4-triazole and further its dehydration to Letrozole by using trifluoroacetic anhydride at low temperature.
Nickel-Catalyzed Cyanation of Aryl Thioethers
Delcaillau, Tristan,Woenckhaus-Alvarez, Adrian,Morandi, Bill
supporting information, p. 7018 - 7022 (2021/09/13)
A nickel-catalyzed cyanation of aryl thioethers using Zn(CN)2 as a cyanide source has been developed to access functionalized aryl nitriles. The ligand dcype (1,2-bis(dicyclohexylphosphino)ethane) in combination with the base KOAc (potassium acetate) is essential for achieving this transformation efficiently. This reaction involves both a C-S bond activation and a C-C bond formation. The scalability, low catalyst and reagents loadings, and high functional group tolerance have enabled both late-stage derivatization and polymer recycling, demonstrating the reaction's utility across organic chemistry.
Preparation method of letrozole
-
Paragraph 0032; 0034-0035; 0037-0038; 0040-0041; 0043, (2021/11/10)
To the method, a continuous flow chemical technology is adopted to prepare the key intermediate, and the temperature of the reaction is accurately controlled. The content of triazole isomeric impurities 4 - [α - (4 - cyanophenyl) -1 - (1, 3, 4 - triazolyl) methyl] - benzonitrile is reduced, so that repeated recrystallization is avoided, the yield is improved, the total yield is 44% more than 67%, and the cost is saved.
Nickel-Catalyzed Reversible Functional Group Metathesis between Aryl Nitriles and Aryl Thioethers
Delcaillau, Tristan,Boehm, Philip,Morandi, Bill
supporting information, p. 3723 - 3728 (2021/04/07)
We describe a new functional group metathesis between aryl nitriles and aryl thioethers. The catalytic system nickel/dcype is essential to achieve this fully reversible transformation in good to excellent yields. Furthermore, the cyanide- and thiol-free reaction shows high functional group tolerance and great efficiency for the late-stage derivatization of commercial molecules. Finally, synthetic applications demonstrate its versatility and utility in multistep synthesis.
Immobilized palladium nanoparticles on a cyclodextrin-polyurethane nanosponge (Pd-CD-PU-NS): An efficient catalyst for cyanation reaction in aqueous media
Khajeh Dangolani, Soheila,Sharifat, Sara,Panahi, Farhad,Khalafi-Nezhad, Ali
supporting information, p. 256 - 265 (2019/06/07)
Immobilized palladium nanoparticles on a cyclodextrin-polyurethane nanosponge (Pd-CD-PU-NS) were found to be an efficient heterogeneous catalyst in the cyanation reaction of aryl halides in aqueous media. This catalyst system is containing palladium nanoparticles with a size of ～7 nm. Moreover, the CD-PU-NS support formed microsphere-shaped structures with a size of ～100–200 nm. The TEM images show that Pd nanoparticles were formed in near spherical shape morphology and were immobilized in the structure of the CD-PU-NS support. Under our optimized reaction conditions, aryl cyanides were obtained in high yields in the presence of the Pd-CD-PU-NS catalyst. Our results demonstrated that the Pd-CD-PU-NS catalyst is highly effective in the cyanation reaction in aqueous media. Furthermore, the catalyst could be simply extracted from the reaction mixture, providing an efficient methodology for the synthesis of aryl cyanides. The Pd-CD-PU-NS catalyst could be recycled four times with almost consistent catalytic efficiency.
Preparation method of aromatic nitrile compound or heteroaromatic nitrile compound
-
Paragraph 0231-0233, (2018/11/03)
The invention discloses a preparation method of an aromatic nitrile compound or a heteroaromatic nitrile compound. The preparation method comprises: under the protection of an inert gas, in a solvent,under the actions of a nickel catalyst, a ligand, metal zinc and an additive, carrying out a reaction on a cyanation reagent and halogenated aromatic hydrocarbon or halogenated heteroaromatic hydrocarbon. According to the present invention, by using the inexpensive and easily-available nickel catalyst and the ligand, the halogenated aromatic hydrocarbon or halogenated heteroaromatic hydrocarbon,especially the chlorinated aromatic hydrocarbon or chlorinated heteroaromatic hydrocarbon with characteristics of low price, easy obtaining and low reaction activity can mildly and efficiently react with the cyanation reagent with low toxicity to prepare the aromatic nitrile compound or heteroaromatic nitrile compound; and the preparation method has advantages of simple operation, mildness, high efficiency and the like, and further has characteristics of good functional group compatibility, good universality of substrate and the like.
General and Mild Nickel-Catalyzed Cyanation of Aryl/Heteroaryl Chlorides with Zn(CN)2: Key Roles of DMAP
Zhang, Xingjie,Xia, Aiyou,Chen, Haoyi,Liu, Yuanhong
supporting information, p. 2118 - 2121 (2017/04/27)
A new and general nickel-catalyzed cyanation of hetero(aryl) chlorides using less toxic Zn(CN)2 as the cyanide source has been developed. The reaction relies on the use of inexpensive NiCl2·6H2O/dppf/Zn as the catalytic system and DMAP as the additive, allowing the cyanation to occur under mild reaction conditions (50-80 °C) with wide functional group tolerance. DMAP was found to be crucial for successful transformation, and the reaction likely proceeds via a Ni(0)/Ni(II) catalysis based on mechanistic studies. The method was also successfully extended to aryl bromides and aryl iodides.
Ex situ generation of stoichiometric HCN and its application in the Pd-catalysed cyanation of aryl bromides: Evidence for a transmetallation step between two oxidative addition Pd-complexes
Kristensen, Steffan K.,Eikeland, Espen Z.,Taarning, Esben,Lindhardt, Anders T.,Skrydstrup, Troels
, p. 8094 - 8105 (2017/11/27)
A protocol for the Pd-catalysed cyanation of aryl bromides using near stoichiometric and gaseous hydrogen cyanide is reported for the first time. A two-chamber reactor was adopted for the safe liberation of ex situ generated HCN in a closed environment, which proved highly efficient in the Ni-catalysed hydrocyanation as the test reaction. Subsequently, this setup was exploited for converting a range of aryl and heteroaryl bromides (28 examples) directly into the corresponding benzonitriles in high yields, without the need for cyanide salts. Cyanation was achieved employing the Pd(0) precatalyst, P(tBu)3-Pd-G3 and a weak base, potassium acetate, in a dioxane-water solvent mixture. The methodology was also suitable for the synthesis of 13C-labelled benzonitriles with ex situ generated 13C-hydrogen cyanide. Stoichiometric studies with the metal complexes were undertaken to delineate the mechanism for this catalytic transformation. Treatment of Pd(P(tBu)3)2 with H13CN in THF provided two Pd-hydride complexes, (P(tBu)3)2Pd(H)(13CN), and [(P(tBu)3)Pd(H)]2Pd(13CN)4, both of which were isolated and characterised by NMR spectroscopy and X-ray crystal structure analysis. When the same reaction was performed in a THF : water mixture in the presence of KOAc, only (P(tBu)3)2Pd(H)(13CN) was formed. Subjection of this cyano hydride metal complex with the oxidative addition complex (P(tBu)3)Pd(Ph)(Br) in a 1 : 1 ratio in THF led to a transmetallation step with the formation of (P(tBu)3)2Pd(H)(Br) and 13C-benzonitrile from a reductive elimination step. These experiments suggest the possibility of a catalytic cycle involving initially the formation of two Pd(ii)-species from the oxidative addition of LnPd(0) into HCN and an aryl bromide followed by a transmetallation step to LnPd(Ar)(CN) and LnPd(H)(Br), which both reductively eliminate, the latter in the presence of KOAc, to generate the benzonitrile and LnPd(0).
Preparation method of letrozole
-
Paragraph 0064; 0065, (2017/04/07)
The invention provides a preparation method of letrozole (6). The preparation method comprises the following steps: reacting a compound (1) with a compound (3) under the effect of an alkaline matter; performing a bromination reaction of the compound (3) to obtain a compound (4); condensing the compound (4) and 4-amino-1,2,4-triazole (5); and performing diazotization to remove the amino to obtain letrozole (6). According to the method provided by the invention, the route is simple; the cheap and easily available p-chlorobenzonitrile and p-tolunitrile are adopted as starting raw materials, and the target product letrozole is obtained through 3 steps of reactions in total; and the preparation method has the advantages of mild reaction conditions, simple and convenient operation, high yield, good chemical selectivity and low production cost, is suitable for industrial production and brings relatively great practical application value and social economic benefits.
Letrozole a process for synthesizing
-
Paragraph 0016; 0017, (2017/03/08)
The invention discloses a process for synthesizing letrozole. The process is characterized by reacting compounds in a structural formula I, a structural formula II and a structural formula III in an environment with a catalyst system, an organic solvent and a certain reaction temperature, thus preparing letrozole. In the process for preparing letrozole, an intermediate is unnecessary to be separated, thus really achieving one-pot reaction; in the reaction, as letrozole molecules are prepared by adopting a series mode, other needed substituent groups can be retained, and other needed functional groups can be introduced, thus preparing various needed function model drug molecules.
