954-16-5Relevant articles and documents
Iodine Promoted Conversion of Esters to Nitriles and Ketones under Metal-Free Conditions
Xiao, Jing,Guo, Fengzhe,Li, Yinfeng,Li, Fangshao,Li, Qiang,Tang, Zi-Long
, p. 2028 - 2035 (2021/02/03)
We report a novel strategy to prepare valuable nitriles and ketones through the conversion of esters under metal-free conditions. By using the I2/PCl3 system, various substrates including aliphatic and aromatic esters could react with acetonitrile and arenes to afford the desired products in good to excellent yields. This method is compatible with a number of functional groups and provides a simple and practical approach for the synthesis of nitrile compounds and aryl ketones.
Carbon-wrapped Fe-Ni bimetallic nanoparticle-catalyzed Friedel-Crafts acylation for green synthesis of aromatic ketones
Bao, Shouxin,Hu, Dianwen,Jia, Mingjun,Lei, Zhenyu,Liu, Jingyao,Song, Xiaojing,Sun, Hao,Zhang, Hao,Zhang, Wenxiang,Zhao, Chen
, p. 7943 - 7954 (2021/12/27)
Developing highly efficient and durable eco-friendly heterogeneous catalysts for the Friedel-Crafts acylation (FCA) reaction has been a long-term and significant target, yet remains a great challenge. Herein, a series of Fe-Ni alloy nanoparticles (NPs) encapsulated inside N-doped carbon spheres (FexNi1?x@NC) was rationally fabricated by pyrolyzing the Fe-Ni bimetallic metal-organic frameworks (BMOFs-FexNi1?x) to this end. Various characterization results demonstrated that FeNi alloy NPs (25 nm) covered by a thin carbon shell (5 nm) were uniformly distributed throughout the entire carbon-based composite. A number of oxidized metal species (Fe3+, Ni2+) are present on the surface of the inner bimetallic core, which should be the main source of catalytically active centers of the carbon-wrapped metal NP catalysts. The composition-optimized Fe0.8Ni0.2@NC with relatively higher positive surface charges exhibited the highest catalytic activity and excellent stability for the acylation of aromatic compounds with acyl chlorides. The density functional theory calculations revealed that the catalytic activity of the FexNi1?x@NC catalysts could arise from the electron transfer,i.e., from the outermost layer of the carbon shell to the inner positively charged Fe-based metal NPs, which can lead to a positive charge distribution (by acting as weak Lewis acid sites) on the external surface of the carbon-encapsulated metal NP catalysts. In this case, the external carbon shell can function as ‘chainmail’ to transfer the Lewis acidity (positive charge), and also to protect the inner metal core from the destructive reaction environment, thus resulting in the formation of highly efficient and durable FCA catalysts.
Oxidative Cleavage of Alkenes by O2with a Non-Heme Manganese Catalyst
Bennett, Elliot L.,Brookfield, Adam,Guan, Renpeng,Huang, Zhiliang,Mcinnes, Eric J. L.,Robertson, Craig M.,Shanmugam, Muralidharan,Xiao, Jianliang
supporting information, p. 10005 - 10013 (2021/07/19)
The oxidative cleavage of C═C double bonds with molecular oxygen to produce carbonyl compounds is an important transformation in chemical and pharmaceutical synthesis. In nature, enzymes containing the first-row transition metals, particularly heme and non-heme iron-dependent enzymes, readily activate O2 and oxidatively cleave C═C bonds with exquisite precision under ambient conditions. The reaction remains challenging for synthetic chemists, however. There are only a small number of known synthetic metal catalysts that allow for the oxidative cleavage of alkenes at an atmospheric pressure of O2, with very few known to catalyze the cleavage of nonactivated alkenes. In this work, we describe a light-driven, Mn-catalyzed protocol for the selective oxidation of alkenes to carbonyls under 1 atm of O2. For the first time, aromatic as well as various nonactivated aliphatic alkenes could be oxidized to afford ketones and aldehydes under clean, mild conditions with a first row, biorelevant metal catalyst. Moreover, the protocol shows a very good functional group tolerance. Mechanistic investigation suggests that Mn-oxo species, including an asymmetric, mixed-valent bis(μ-oxo)-Mn(III,IV) complex, are involved in the oxidation, and the solvent methanol participates in O2 activation that leads to the formation of the oxo species.
Preparation method of benzophenone derivative
-
Paragraph 0078-0083, (2021/06/22)
The invention provides a preparation method of a benzophenone derivative. The preparation method comprises the following step: subjecting a benzoic acid compound as shown in a formula I, a trichlorotoluene compound as shown in a formula II and a benzene compound as shown in a formula III to reacting under the catalysis of Fe2O3 to obtain the benzophenone derivative. According to the preparation method provided by the invention, the metal oxide Fe2O3 with higher stability and safety is used as a catalyst, so corrosion of materials to equipment is avoided, and the preparation method is more environment-friendly; according to the preparation method, the target product is obtained through one-step reaction, reaction conditions are mild, and a process is simple; and the main byproduct benzoic acid compound generated by the reaction can be recycled by washing, extracting and desolventizing in post-treatment, and then is used as a reaction raw material for preparing the benzophenone derivative again, so wastewater treatment cost is reduced, and resources are fully utilized.
Acylboronates in polarity-reversed generation of acyl palladium(II) intermediates
Trofimova, Alina,Holownia, Aleksandra,Tien, Chieh-Hung,?irvinskas, Martynas J.,Yudin, Andrei K.
supporting information, p. 3294 - 3299 (2021/05/07)
We report a catalytic cross-coupling process between aryl (pseudo)halides and boron-based acyl anion equivalents. This mode of acylboronate reactivity represents polarity reversal, which is supported by the observation of tetracoordinated boronate and acyl palladium(II) species by 11B, 31P NMR, and mass spectrometry. A broad scope of aliphatic and aromatic acylboronates has been examined, as well as a variety of aryl (pseudo)halides.
Tunable aryl imidazolium recyclable ionic liquid with dual br?nsted-lewis acid as green catalyst for friedel-crafts acylation and thioesterification
Chen, Wen-Tin,Chou, Shih-Huan,Ho, Wen-Yueh,Hung, Ming-Wei,Lin, Michelle,Lin, Wesley,Lin, Yi-Jyun,Luo, Shun-Yuan,Reddy, Daggula Mallikarjuna,Thul, Mayur,Wu, Hsin-Ru,Wu, Yao-Peng
, (2020/01/28)
Unique tunable aryl imidazolium ionic liquids successfully catalyzed Friedel-Crafts acylation and thioesterification in sealed tubes. These reactions can form a C-C bond and a C-S bond with high atom economy. Ionic liquids exhibited high activity and catalyzed essential reactions with good to excellent yields while retaining their catalytic activities for recycling.
Sterically Hindered Ketones via Palladium-Catalyzed Suzuki-Miyaura Cross-Coupling of Amides by N-C(O) Activation
Liu, Chengwei,Lalancette, Roger,Szostak, Roman,Szostak, Michal
supporting information, p. 7976 - 7981 (2019/10/10)
Herein, we report a new protocol for the synthesis of sterically hindered ketones that proceeds via palladium-catalyzed Suzuki-Miyaura cross-coupling of unconventional amide electrophiles by selective N-C(O) activation. Mechanistic studies demonstrate that steric bulk on the amide has a major impact, which is opposite to the traditional Suzuki-Miyaura cross-coupling of sterically hindered aryl halides. Structural and computational studies provide insight into ground-state distortion of sterically hindered amides and show that ortho-substitution alleviates the N-C(O) bond twist.
Chemoselective Synthesis of Aryl Ketones from Amides and Grignard Reagents via C(O)-N Bond Cleavage under Catalyst-Free Conditions
Sureshbabu, Popuri,Azeez, Sadaf,Muniyappan, Nalluchamy,Sabiah, Shahulhameed,Kandasamy, Jeyakumar
, p. 11823 - 11838 (2019/10/02)
Conversion of a wide range of N-Boc amides to aryl ketones was achieved with Grignard reagents via chemoselective C(O)-N bond cleavage. The reactions proceeded under catalyst-free conditions with different aryl, alkyl, and alkynyl Grignard reagents. α-Ketoamide was successfully converted to aryl diketones, while α,β-unsaturated amide underwent 1,4-addition followed by C(O)-N bond cleavage to provide diaryl propiophenones. N-Boc amides displayed higher reactivity than Weinreb amides with Grignard reagents. A broad substrate scope, excellent yields, and quick conversion are important features of this methodology.
Transition-metal-free carbonylation of aryl halides with arylboronic acids by utilizing stoichiometric CHCl3 as the carbon monoxide-precursor
Xu, Fangning,Li, Dan,Han, Wei
supporting information, p. 2911 - 2915 (2019/06/18)
Under transition-metal-free conditions, carbonylative Suzuki couplings of aryl halides with arylboronic acid using stoichiometric CHCl3 as the carbonyl source has been developed. The simple, efficient, and environmentally benign method was successfully applied to the synthesis of Fenofibric acid, naphthyl phenstatin, and carbon-13 labeled biaryl ketone.
Transition-Metal-Free Carbonylative Suzuki-Miyaura Reactions of Aryl Iodides with Arylboronic Acids Using N-Formylsaccharin as CO Surrogate
Yu, Dezhong,Xu, Fangning,Li, Dan,Han, Wei
supporting information, p. 3102 - 3107 (2019/05/21)
Unprecedented, high yielding, transition-metal-free carbonylative Suzuki-Miyaura reactions of aryl iodides with arylboronic acids using N-formylsaccharin as CO surrogate have been developed. Notably, this general protocol was adapted to the synthesis of the triglyceride and cholesterol regulator drug, fenofibrate, and carbon-13 labeled biaryl ketone. (Figure presented.).
