Welcome to LookChem.com Sign In|Join Free

Article Doi

Alkene Oxidation over the Mo-Bi Mixed Oxides/AuYttria-stabilized ZirconiaAg System

DOI: 10.1039/ft9959101117

Source and publish data:

Journal of the Chemical Society - Faraday Transactions p. 1117 - 1124 (1995)

Update date:2022-08-30

Topics:

Authors:

Tsunoda, TatsuoTsunoda, Tatsuo

Hayakawa, TakashiHayakawa, Takashi

Kameyama, TetsuyaKameyama, Tetsuya

Fukuda, KenzoFukuda, Kenzo

Takehira, KatsuomiTakehira, Katsuomi

Read Full Text PDF DownLoad Join now for total 90,000,000 free articles

Article abstract of DOI:10.1039/ft9959101117

Oxidation of propene and but-1-ene has been carried out in an MoO3-Bi2O3/Au<*>yttria-stabilized zirconia (YSZ)<*>Ag electrochemical reactor at 723 K and compared with the result obtained by means of a mixed-gas flow reaction over the MoO3-Bi2O3 catalyst.The MoO3-Bi2O3 catalyst was prepared from MoO3, three phases of bismuth molybdate and Bi2O3 and each catalyst was successfully deposited by vacuum evaporation as a compact thin film on the Au anode.For propene oxidation, MoO3 showed the highest activity among the catalysts used on the Au anode and its activity was up to 600 times higher than that obtained with the same catalyst using a mixed-gas flow reaction.These results suggest that oxygen species bound to molybdenum metal possess a definite role for both α-H abstraction from propene and oxygen insertion into the allylic intermediate under a sufficient oxygen supply.On the other hand, oxygen can permeate through a Bi2O3 film, suggesting that the bismuth species is effective for O2 incorporation into the catalyst and also for transportation of oxide ions through the catalyst bulk.Each phenomenon, i.e. the insertion of lattice oxide ions into the allylic intermediate and O2 incorporation into the lattice was separately observed.The electrochemical-reactor system showed some advantages for propene oxidation, e.g. high selectivity to arylaldehyde under high reaction temperatures and higher activity, compared with the mixed-gas flow reaction.In but-1-ene oxidation the main product was buta-1,3-diene by oxidative dehydrogenation and Bi2O2O9 (β) showed the highest activity.The critical effect of molybdenum species was not observed in this reaction but high activity was still obtained over the molybdenum-rich catalysts.

View More

Products guided by the article

Product name:1,3-Butadiene

Cas No:106-99-0

106-99-0

R&D Labs maybe for 106-99-0

Relevant to this article

Hot Product