Paper
RSC Advances
greater than that of MPU/HNT-5. Similarly, the Young's 21 S. J. Komarneni, Mater. Chem., 1992, 2, 1219–1230.
modulus of T-MPU/HNT attained a largest value of 101.7 MPa at 22 B. M. Novak, Adv. Mater., 1993, 5, 422–433.
5
wt% HNTs, which is more than 16 times greater than that of 23 R. S. Sinha and M. Okamoto, Prog. Polym. Sci., 2003, 28,
MPU/HNT-5. The results of this study are expected to have an 1539–1641.
impact on widening the practical use and potential applications 24 P. Podsiadlo, A. K. Kaushik, E. M. Arruda, A. M. Waas,
of HNT-based nanocomposite materials such as hot melt
adhesives and TPU.
B. S. Shim, J. D. Xu, H. Nandivada, B. G. Pumplin,
J. Lahann, A. Ramamoorthy and N. A. Kotov, Science, 2007,
3
18, 80–83.
5 S. M. Liff, N. Kumar and G. H. McKinley, Nat. Mater., 2007, 6,
6–83.
2
Acknowledgements
7
The authors thank Ningbo Institute of Industrial Technology 26 D. Y. Cai, K. Yusoh and M. Song, The mechanical properties
and the Instrumental Analysis Center of SJTU for providing
equipment to facilitate our AFM and TEM measurements,
and morphology of
polyurethane composite, Nanotechnology, 2009, 20, 685–712.
a
graphite oxide nanoplatelet/
respectively. We thank LetPub (http://www.letpub.com) for its 27 B. S. Hsiao, H. White, M. Rafailovich, P. T. Mather,
linguistic assistance during the preparation of this manuscript.
H. G. Jeon, S. Phillips, J. Lichtenhan and J. Schwab, Polym.
Int., 2000, 49, 437–440.
2
8 H. Liu, J. Xu, Y. Li, B. Li, J. Ma and X. Zhang, Macromol. Rapid
Commun., 2006, 27, 1603–1607.
References
1
H. W. Engels, H. G. Pirkl, R. Albers, R. W. Albach, J. Krause, 29 R. Sen, B. Zhao, D. Perea, M. E. Itkis, H. Hu, J. Love,
A. Hoffmann, H. Casselmann and J. Dormish, Angew. Chem.,
Int. Ed., 2013, 52(36), 9422–9441.
E. Bekyarova and R. C. Haddon, Nano Lett., 2004, 4, 459–464.
30 H. Koerner, W. D. Liu, M. Alexander, P. Mirau, H. Dowty and
2
H. Sardon, A. C. Engler, J. M. W. Chan, J. M. Garc ´ı a,
R. A. Vaia, Polymer, 2005, 46, 4405–4420.
D. J. Coady, A. Pascual, D. Mecerreyes, G. O. Jones, 31 H. S. Xia and M. Song, So Matter, 2005, 1, 386–394.
J. E. Rice, H. W. Horn and J. L. Hedrick, J. Am. Chem. Soc., 32 J. Kwon and H. J. Kim, J. Polym. Sci., Part A: Polym. Chem.,
2
013, 135, 16235–16241.
H. Yeganeh and M. R. Mehdizadeh, Eur. Polym. J., 2004, 40, 33 S. M. Liff, N. Kumar and G. H. McKinley, Nat. Mater., 2007, 6,
233–1238.
76–83.
K. Joy, I. K. Mishra and S. H. Chang, Macromol. Rapid 34 Z. Wang and T. J. Pinnavaia, Chem. Mater., 1998, 10, 3769–
Commun., 2003, 24, 671–675. 3771.
G. S. Navinchandra, A. S. Harishchandra, D. M. Ananda and 35 C. Zilg, R. Thomann, R. Mulhaupt and J. Finter, Adv. Mater.,
S. Mishra, J. Reinf. Plast. Compos., 2013, 32, 935–946. 1999, 11, 49–52.
G. Navinchandra, H. A. Shimpi, A. D. Sonawane and 36 Y. I. Tien and K. H. Wei, Macromolecules, 2001, 34, 9045–
M. S. Mishra, Polym. Bull., 2014, 71, 515–531. 9052.
A. K. Barick and Y. W. Chang, High Perform. Polym., 2014, 26, 37 B. Finnigan, K. Jack, K. Campbell, P. Halley, R. Truss,
2005, 43, 3973–3985.
3
4
5
6
7
1
609–617.
P. Casey, D. Cookson, S. King and D. Martin,
8
9
J. Ahenmiller and D. Patterson, Rubber World, 1993, 27.
Macromolecules, 2005, 38, 7386–7396.
R. D. A. Paulmer, C. S. Shah, M. J. Patni and M. V. Pandya, J. 38 E. Joussein, S. Petit, J. Churchman, B. Theng, D. Righi and
Appl. Polym. Sci., 1991, 43, 1953.
0 N. D. Ghatge and V. B. Phadke, Rubber Age, 1968, 10, 52.
1 T. L. Jablonowski and R. J. Scribner, 151st ACS Rubber 40 R. L. Frost and H. F. Shurvell, Clays Clay Miner., 1997, 45, 68–
B. Delvaux, Clay Miner., 2005, 40, 383–426.
39 B. Singh, Clays Clay Miner., 1996, 44, 191–196.
1
1
Division Meeting, Spring, Anaheim Ca., 1997, Paper 61, p.
9.012.
2 J. R. Serumgard, 151st ACS Rubber Division Meeting, Spring,
Anaheim Ca., 1997, Paper 12, p. 19.012.
3 J. Ahnemiller, Rubber Plast. News., 1992, 21(24), 15.
4 P. H. McKinstry and M. Chase, Urethanes Technology, 1990,
72.
1
41 M. Du, B. Guo, X. Cai, Z. Jia, M. Liu and D. Jia, Morphology
and properties of halloysite nanotubes reinforced
polypropylene nanocomposites, e-Polymers, 2008, 130, 1–14.
42 K. M. Ng, Y. T. R. Lau, C. M. Chan, L. T. Weng and J. Wu,
Surf. Interface Anal., 2011, 43, 795–802.
1
1
1
2
4–28.
5 S. K. N. Kutty and G. B. Nando, Plast. Rubber Process. Appl.,
990, 14, 109.
43 H. Ismail, S. Z. Salleh and Z. Ahmad, Mater. Des., 2013, 50,
790–797.
44 D. Tao, Y. J. Higaki and W. Ma, Polymer, 2015, 60, 284–291.
45 M. X. Liu, Z. X. Jia, D. M. Jia and C. R. Zhou, Prog. Polym. Sci.,
2014, 39, 1498–1525.
1
1
1
1
1
6 H. Shirasaka, US Pat., 6008312, 1999.
7 A. Singh, US Pat., 4335231, 1982.
8 Z. S. Petrovic and D. Fajnik, J. Appl. Polym. Sci., 1984, 29, 46 L. Jiang, C. Zhang, M. K. Liu, Z. Yang, W. W. Tjiu and
031. T. X. Liu, Compos. Sci. Technol., 2014, 91, 98–103.
9 R. F. Ziolo, E. P. Giannelis, B. A. Weinstein, M. P. O'Horo, 47 B. Lecouvet, M. Sclavons, S. Bourbigot, J. Devaux and
1
1
B. N. Granguly, V. Mehrota, M. W. Russell and
D. R. Huffman, Science, 1992, 257, 219–222.
0 H. Gleiter, Adv. Mater., 1992, 4, 474–481.
C. Bailly, Polymer, 2011, 52, 4284–4295.
48 A. Pei, J. M. Malho, J. Ruokolainen, Q. Zhou and
L. A. Berglund, Macromolecules, 2011, 44, 4422–4427.
2
This journal is © The Royal Society of Chemistry 2015
RSC Adv., 2015, 5, 77106–77114 | 77113