Welcome to LookChem.com Sign In|Join Free
  • or
Home > Products >  > 

Triethylphosphine oxide

Related Products

Hot Products

Name

Triethylphosphine oxide

EINECS N/A
CAS No. 597-50-2 Density 0.884 g/cm3
PSA 26.88000 LogP 2.40920
Solubility Soluble in water. Melting Point 48-52 °C(lit.)
Formula C6H15OP Boiling Point 243 °C at 760 mmHg
Molecular Weight 134.158 Flash Point 100.8 °C
Transport Information 1759 Appearance White needles
Safety 45-36/37/39-26 Risk Codes 34
Molecular Structure Molecular Structure of 597-50-2 (Triethylphosphine oxide) Hazard Symbols CorrosiveC
Synonyms

NSC 41934;Triethylphosphine oxide;SKF 39804;

Article Data 19

Triethylphosphine oxide Specification

The CAS register number of Triethylphosphine oxide is 597-50-2. It also can be called as Triethylphosphine oxide and the IUPAC name about this chemical is 1-diethylphosphorylethane. The molecular formula about this chemical is C6H15OP and the molecular weight is 134.16. It belongs to the following product categories which include Phosphine Oxides and Sulfides; Catalysis and Inorganic Chemistry; Phosphine Ligands; Phosphorus Compounds and so on.

Physical properties about Triethylphosphine oxide are: (1)ACD/LogP: -0.17; (2)ACD/LogD (pH 5.5): -0.17; (3)ACD/LogD (pH 7.4): -0.17; (4)ACD/BCF (pH 5.5): 1; (5)ACD/BCF (pH 7.4): 1; (6)ACD/KOC (pH 5.5): 19.34; (7)ACD/KOC (pH 7.4): 19.34; (8)#H bond acceptors: 1; (9)#Freely Rotating Bonds: 3; (10)Polar Surface Area: 26.88 Å2; (11)Index of Refraction: 1.399; (12)Molar Refractivity: 36.71 cm3; (13)Molar Volume: 151.7 cm3; (14)Polarizability: 14.55x10-24cm3; (15)Surface Tension: 26.1 dyne/cm; (16)Density: 0.884 g/cm3; (17)Flash Point: 100.8 °C; (18)Enthalpy of Vaporization: 46.06 kJ/mol; (19)Boiling Point: 243 °C at 760 mmHg; (20)Vapour Pressure: 0.0512 mmHg at 25 °C.

Preparation: this chemical can be prepared by triethylaluminium. This reaction will need reagent of diphenyl phosphite and solvent of benzene. The yield is about 32%.

Preparation: this chemical can be prepared by triethylaluminium. This reaction will need reagent of diphenyl phosphite and solvent of benzene. The yield is about 32%.

Uses of Triethylphosphine oxide: it can be used to produce tris(perfluoroethyl)difluorophosphane. This reaction will need reagent of HF. This reaction needs electrochemical fluorination. The yield is about 42%.

Uses of Triethylphosphine oxide: it can be used to produce tris(perfluoroethyl)difluorophosphane. This reaction will need reagent of HF. This reaction needs electrochemical fluorination. The yield is about 42%.

When you are using this chemical, please be cautious about it as the following:
This chemical can cause burns. It may destroy living tissue on contact. If you want to use it, wear suitable protective clothing, gloves and eye/face protection. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.)

You can still convert the following datas into molecular structure:
(1)SMILES: O=P(CC)(CC)CC
(2)InChI: InChI=1/C6H15OP/c1-4-8(7,5-2)6-3/h4-6H2,1-3H3(3)InChIKey: ZSSWXNPRLJLCDU-UHFFFAOYAQ
(4)Std. InChI: InChI=1S/C6H15OP/c1-4-8(7,5-2)6-3/h4-6H2,1-3H3
(5)Std. InChIKey: ZSSWXNPRLJLCDU-UHFFFAOYSA-N

The toxicity data is as follows:

Organism Test Type Route Reported Dose (Normalized Dose) Effect Source
mouse LC inhalation > 1450mg/m3/10 (1450mg/m3)   National Defense Research Committee, Office of Scientific Research and Development, Progress Report.Vol. NDCrc-132, Pg. NOV1942,

Post a RFQ

Enter 15 to 2000 letters.Word count: 0 letters

Attach files(File Format: Jpeg, Jpg, Gif, Png, PDF, PPT, Zip, Rar,Word or Excel Maximum File Size: 3MB)

1

What can I do for you?
Get Best Price

Get Best Price for 597-50-2