Welcome to LookChem.com Sign In|Join Free

CAS

  • or
BENZYL-PYRIDIN-3-YL-AMINE, with the chemical formula C12H13N, is an aromatic amine that features a benzyl group attached to a pyridine ring at the 3-position. BENZYL-PYRIDIN-3-YL-AMINE is recognized for its role as a building block in the synthesis of pharmaceuticals, agrochemicals, and other organic compounds. Additionally, it is noted for its potential biological activity, which is currently under investigation for its possible applications in treating various diseases. Due to its reactivity and potential health risks, careful handling of this chemical is essential.

114081-08-2

Post Buying Request

114081-08-2 Suppliers

Recommended suppliersmore

  • Product
  • FOB Price
  • Min.Order
  • Supply Ability
  • Supplier
  • Contact Supplier

114081-08-2 Usage

Uses

Used in Pharmaceutical Industry:
BENZYL-PYRIDIN-3-YL-AMINE is used as a key intermediate in the synthesis of various pharmaceuticals for its ability to contribute to the development of new drugs with potential therapeutic properties.
Used in Agrochemical Industry:
In the agrochemical sector, BENZYL-PYRIDIN-3-YL-AMINE is utilized as a precursor in the creation of agrochemicals, potentially enhancing crop protection and yield through its incorporation into effective compounds.
Used in Organic Synthesis:
BENZYL-PYRIDIN-3-YL-AMINE is employed as a versatile building block in organic synthesis, allowing for the construction of a wide range of organic compounds for various applications, including but not limited to materials science and specialty chemicals.
Used in Biological Research:
BENZYL-PYRIDIN-3-YL-AMINE is also used in biological research as a potential therapeutic agent for the treatment of various diseases, given its noted biological activity, which is currently under investigation to understand its full potential and mechanisms of action.

Check Digit Verification of cas no

The CAS Registry Mumber 114081-08-2 includes 9 digits separated into 3 groups by hyphens. The first part of the number,starting from the left, has 6 digits, 1,1,4,0,8 and 1 respectively; the second part has 2 digits, 0 and 8 respectively.
Calculate Digit Verification of CAS Registry Number 114081-08:
(8*1)+(7*1)+(6*4)+(5*0)+(4*8)+(3*1)+(2*0)+(1*8)=82
82 % 10 = 2
So 114081-08-2 is a valid CAS Registry Number.

114081-08-2SDS

SAFETY DATA SHEETS

According to Globally Harmonized System of Classification and Labelling of Chemicals (GHS) - Sixth revised edition

Version: 1.0

Creation Date: Aug 16, 2017

Revision Date: Aug 16, 2017

1.Identification

1.1 GHS Product identifier

Product name BENZYL-PYRIDIN-3-YL-AMINE

1.2 Other means of identification

Product number -
Other names BENZYLAMINOPYRIDINE

1.3 Recommended use of the chemical and restrictions on use

Identified uses For industry use only.
Uses advised against no data available

1.4 Supplier's details

1.5 Emergency phone number

Emergency phone number -
Service hours Monday to Friday, 9am-5pm (Standard time zone: UTC/GMT +8 hours).

More Details:114081-08-2 SDS

114081-08-2Relevant articles and documents

CuCl-catalyzed formation of C-N bond with a soluble base

Feng, Yi-Si,Man, Qiu-Shi,Pan, Pan,Pan, Zong-Qin,Xu, Hua-Jian

, p. 2585 - 2588 (2009)

Tetramethylammonium hydroxide was used as a base instead of a traditional inorganic base in this copper-catalyzed system and some satisfactory results were obtained. Various functional groups were compatible under this reaction condition.

Slow anion exchange, conformational equilibria, and fluorescent sensing in venus flytrap aminopyridinium-based anion hosts

Wallace, Karl J.,Belcher, Warwick J.,Turner, David R.,Syed, Kauser F.,Steed, Jonathan W.

, p. 9699 - 9715 (2003)

The synthesis, anion binding, and conformational properties of a series of 3-aminopyridinium-based, tripodal, tricationic hosts for anions are described. Slow anion and conformational exchange on the 1H NMR time scale at low temperature, coupled with NMR titration, results in a high level of understanding of the anion-binding properties of the compounds, particularly with respect to significant conformational change resulting from induced fit complexation. Peak selectivity for halides, particularly Cl-, is observed. The approach has been extended to dipodal and tripodal podands based on 3-aminopyridinium "arms" containing photoactive anthracenyl moieties. The 1,3,5-tripodal host shows a remarkable selectivity for acetate over other anions, in contrast to the analogous unsubstituted tris(3-aminopyridinium) analogue, despite the fact that low-temperature 1H NMR experiments reveal a total of four acetate-binding conformations. Photodimerization of anthracene units results in the formation of potential fluorescent anion sensors.

Microwave-assisted organic synthesis: Scale-up of palladium-catalyzed aminations using single-mode and multi-mode microwave equipment

Loones, Kristof T. J.,Maes, Bert U. W.,Rombouts, Geert,Hostyn, Steven,Diels, Gaston

, p. 10338 - 10348 (2005)

Batch wise scale-up of Buchwald-Hartwig aminations under microwave irradiation has been investigated for the first time. Multi-mode (microSYNTH and MARS) (several vessels irradiated in parallel per batch) as well as single-mode (Discover) (one vessel irradiated per batch) platforms can be successfully used for this purpose with trifluoromethylbenzene (benzotrifluoride: BTF) as amination solvent. The obtained yields indicate a direct scalability in BTF for all the studied aminations. The Voyager equipment (based on a Discover platform) is the most convenient system since it allows an automatic continuous batch wise production without the necessity to manually load and unload reaction vessels.

Ligand-free CuCl-catalyzed C-N bond formation in aqueous media

Xu, Hua-Jian,Zheng, Fa-Yin,Liang, Yu-Feng,Cai, Zhen-Ya,Feng, Yi-Si,Che, Da-Qing

, p. 669 - 671 (2010)

CuCl-catalyzed N-arylation of alkyl amines and N-heterocycles with substituted aryl iodides and bromides can be carried out in 40% nBu4N+OH- aqueous solution without any ligands. Crown Copyright

[(PPh3)2NiCl2]-Catalyzed C-N bond formation reaction via borrowing hydrogen strategy: Access to diverse secondary amines and quinolines

Donthireddy,Pandey, Vipin K.,Rit, Arnab

, p. 6994 - 7001 (2021/06/09)

Commercially available [(PPh3)2NiCl2] was found to be an efficient catalyst for the mono-N-alkylation of (hetero)- A romatic amines, employing alcohols to deliver diverse secondary amines, including the drug intermediates chloropyramine (5b) and mepyramine (5c), in excellent yields (up to 97%) via the borrowing hydrogen strategy. This method shows a superior activity (TON up to 10000) with a broad substrate scope at a low catalyst loading of 1 mol % and a short reaction time. Further, this strategy is also successful in accessing various quinoline derivatives following the acceptorless dehydrogenation pathway.

Effect of the ancillary ligand in N-heterocyclic carbene iridium(III) catalyzed N-alkylation of amines with alcohols

Feng, Xinshu,Huang, Ming

, (2021/06/21)

A series of air-stable N-heterocyclic carbene (NHC) Ir(III) complexes (Ir1-6), bearing various combinations of chlorine, pyridine and NHC ligands, were assayed for the N-alkylation of amines with alcohols. It was found that Ir3, with two monodentate 1,3-bis-methyl-imidazolylidene (IMe) ligands, emerged as the most active complex. A large variety of amines and primary alcohols were efficiently converted into mono-N-alkylated amines in 53–96% yields. As a special highlight, for the challenging MeOH, selective N-monomethylation could be achieved using KOH as a base under an air atmosphere. Moreover, this catalytic system was successfully applied to the gram-scale synthesis of some valuable compounds.

Synthesis of an Fe-Pd bimetallic catalyst for: N -alkylation of amines with alcohols via a hydrogen auto-transfer methodology

Wu, Peng-Yu,Lu, Guo-Ping,Cai, Chun

, p. 396 - 404 (2021/01/28)

Hydrogen auto-transfer (HAT) or borrowing hydrogen (BH) methodology which combines dehydrogenation, intermediate reaction and hydrogenation, is recognized as an excellent strategy for one-pot synthesis from an economic and environmental point of view. Although much effort has been made on the development of catalysts for HAT reactions, harsh conditions, external base or large amounts of noble metals are still required in most reported catalysis systems, and thus the exploration of a highly efficient and recyclable heterogeneous catalyst remains meaningful. In this work, a novel bimetallic catalyst, Fe10Pd1/NC500 derived from bimetallic MOF NH2-MIL-101(Fe10Pd1), has been prepared, and the catalyst exhibits superior catalytic performance for the N-alkylation of amines with alcohols via a hydrogen auto-transfer methodology. High yields of the desired products were achieved at 120 °C with an alcohol/amine molar ratio of 2?:?1 and required no external additive or solvent. A distinct enhancement in catalytic performance is observed when compared with monometallic catalysts, which can be ascribed to the "synergistic effects"inside the bimetallic alloys. The N-doped carbon support has been revealed to provide the necessary basicity which avoids the requirement of an external base. Moreover, a wide substrate range and remarkable reusability have been shown by Fe10Pd1/NC500, and this work highlights new possibilities for bimetallic catalysts applied in sustainable chemistry.

Tungsten-Catalyzed Direct N-Alkylation of Anilines with Alcohols

Lan, Xiao-Bing,Ye, Zongren,Yang, Chenhui,Li, Weikang,Liu, Jiahao,Huang, Ming,Liu, Yan,Ke, Zhuofeng

, p. 860 - 865 (2021/01/18)

The implementation of non-noble metals mediated chemistry is a major goal in homogeneous catalysis. Borrowing hydrogen/hydrogen autotransfer (BH/HA) reaction, as a straightforward and sustainable synthetic method, has attracted considerable attention in the development of non-noble metal catalysts. Herein, we report a tungsten-catalyzed N-alkylation reaction of anilines with primary alcohols via BH/HA. This phosphine-free W(phen)(CO)4 (phen=1,10-phenthroline) system was demonstrated as a practical and easily accessible in-situ catalysis for a broad range of amines and alcohols (up to 49 examples, including 16 previously undisclosed products). Notably, this tungsten system can tolerate numerous functional groups, especially the challenging substrates with sterically hindered substituents, or heteroatoms. Mechanistic insights based on experimental and computational studies are also provided.

Water-promoted dehydrative coupling of 2-aminopyridines in heptane: Via a borrowing hydrogen strategy

Azumaya, Isao,Hikawa, Hidemasa,Kikkawa, Shoko,Nakayama, Taku

, p. 23144 - 23150 (2021/07/21)

A synthetic method for dehydrative N-benzylation promoted by water molecules in heptane using a π-benzylpalladium system has been developed. The presence of water significantly accelerates carbon-nitrogen bond formation, which is accomplished in an atom-economical process to afford the corresponding N-monobenzylated products. A crossover experiment afforded H/D scrambled products, which is consistent with a borrowing hydrogen mechanism. Kinetic isotope effect measurements revealed that benzylic carbon-hydrogen bond cleavage was the rate-determining step.

Ruthenium(ii) complexes with N-heterocyclic carbene-phosphine ligands for theN-alkylation of amines with alcohols

Huang, Ming,Li, Yinwu,Lan, Xiao-Bing,Liu, Jiahao,Zhao, Cunyuan,Liu, Yan,Ke, Zhuofeng

supporting information, p. 3451 - 3461 (2021/05/03)

Metal hydride complexes are key intermediates forN-alkylation of amines with alcohols by the borrowing hydrogen/hydrogen autotransfer (BH/HA) strategy. Reactivity tuning of metal hydride complexes could adjust the dehydrogenation of alcohols and the hydrogenation of imines. Herein we report ruthenium(ii) complexes with hetero-bidentate N-heterocyclic carbene (NHC)-phosphine ligands, which realize smart pathway selection in theN-alkylated reactionviareactivity tuning of [Ru-H] species by hetero-bidentate ligands. In particular, complex6cbwith a phenyl wingtip group and BArF?counter anion, is shown to be one of the most efficient pre-catalysts for this transformation (temperature is as low as 70 °C, neat conditions and catalyst loading is as low as 0.25 mol%). A large variety of (hetero)aromatic amines and primary alcohols were efficiently converted into mono-N-alkylated amines in good to excellent isolated yields. Notably, aliphatic amines, challenging methanol and diamines could also be transformed into the desired products. Detailed control experiments and density functional theory (DFT) calculations provide insights to understand the mechanism and the smart pathway selectionvia[Ru-H] species in this process.

Post a RFQ

Enter 15 to 2000 letters.Word count: 0 letters

Attach files(File Format: Jpeg, Jpg, Gif, Png, PDF, PPT, Zip, Rar,Word or Excel Maximum File Size: 3MB)

1

What can I do for you?
Get Best Price

Get Best Price for 114081-08-2