14065-22-6Relevant academic research and scientific papers
Environmentally Friendly and Recyclable CuCl 2-Mediated C-S Bond Coupling Strategy Using DMEDA as Ligand, Base, and Solvent
Shen, Guodong,Lu, Qichao,Wang, Zeyou,Sun, Weiwei,Zhang, Yalin,Huang, Xianqiang,Sun, Manman,Wang, Zhiming
supporting information, p. 184 - 198 (2021/09/20)
Simple reaction conditions and recyclable reagents are crucial for environmentally friendly industrial applications. An environment-friendly, recyclable and economic strategy was developed to synthesize diaryl chalcogenides by the CuCl2-catalyzed C S bondformation reaction via iodobenzenes and benzenethiols/1,2-diphenyldisulfanes using N,N'-dimethylethane-1,2-diamine (DMEDA) as ligand, base, and solvent. For these reactions, especially the reactions of diiodobenzenes and aminobenzenethiols/disulfanediyldianilines, a range of substrates are compatible and give the corresponding products in good to excellent yields. Both of the reagents in the catalytic system (CuCl2/DMEDA) are inexpensive, conveniently separable, and recyclable for more than five cycles.
Modulation of photochemical oxidation of thioethers to sulfoxides or sulfones using an aromatic ketone as the photocatalyst
Zhao, Bin,Hammond, Gerald B.,Xu, Bo
supporting information, (2021/09/13)
We have developed an eco-friendly and chemo-selective photocatalytic synthesis of sulfoxides or sulfones via oxidation of sulfides (thioethers) at ambient temperature using air or O2 as the oxidant. An inexpensive thioxanthone was used as the photocatalyst. Our method offers excellent chemical yields and good functional group tolerance. The hydrogen bonding between hexafluoro-2-propanol (HFIP) and sulfoxides may play an important role in minimizing the over-oxidization of sulfoxides.
Ni(II) Precatalysts Enable Thioetherification of (Hetero)Aryl Halides and Tosylates and Tandem C?S/C?N Couplings
Martín, M. Trinidad,Marín, Mario,Maya, Celia,Prieto, Auxiliadora,Nicasio, M. Carmen
supporting information, p. 12320 - 12326 (2021/08/09)
Ni-catalyzed C?S cross-coupling reactions have received less attention compared with other C-heteroatom couplings. Most reported examples comprise the thioetherification of most reactive aryl iodides with aromatic thiols. The use of C?O electrophiles in this context is almost uncharted. Here, we describe that preformed Ni(II) precatalysts of the type NiCl(allyl)(PMe2Ar’) (Ar’=terphenyl group) efficiently couple a wide range of (hetero)aryl halides, including challenging aryl chlorides, with a variety of aromatic and aliphatic thiols. Aryl and alkenyl tosylates are also well tolerated, demonstrating, for the first time, to be competent electrophilic partners in Ni-catalyzed C?S bond formation. The chemoselective functionalization of the C?I bond in the presence of a C?Cl bond allows for designing site-selective tandem C?S/C?N couplings. The formation of the two C-heteroatom bonds takes place in a single operation and represents a rare example of dual electrophile/nucleophile chemoselective process.
Synthesis of diaryl sulfides based on copper-doped OMS-2
Yu, Shao-Qiang,Liu, Na,Liu, Ming-Guo,Wang, Long
, p. 237 - 241 (2020/11/30)
We describe a practical protocol for efficiently preparing diaryl sulfide compounds using Cu–OMS-2 as the catalyst. Cu–OMS-2 originates from manganese oxide octahedral molecular sieves modified with copper ions and catalyzes the C–S coupling reaction of substituted thiophenols and aryl halides. This protocol has the advantages of environmental friendliness, simple operation, high yields, good tolerance of functional groups, and the Cu–OMS-2 catalytic material can be recycled several times.
Chan-Lam-Type C-S Coupling Reaction by Sodium Aryl Sulfinates and Organoboron Compounds
Lam, Long Yin,Ma, Cong
supporting information, p. 6164 - 6168 (2021/08/16)
A Chan-Lam-Type C-S coupling reaction using sodium aryl sulfinates has been developed to provide diaryl thioethers in up to 92% yields in the presence of a copper catalyst and potassium sulfite. Both electron-rich and electron-poor sodium aryl sulfinates and diverse organoboron compounds were tolerated for the synthesis of aryl and heteroaryl thioethers and dithioethers. The mechanistic study suggested that potassium sulfite was involved in the deoxygenation of sulfinate through a radical process.
Exploration of the mechanism and scope of the CuI/DABCO catalysed C–S coupling reaction
Thomas, Anns Maria,Sherin,Asha, Sujatha,Manojkumar,Anilkumar, Gopinathan
supporting information, (2019/12/26)
A cost effective and easily available CuI/DABCO catalytic system has been developed for the C–S cross-coupling reaction. This method is extremely useful for the thioetherification of aryl and heteroaryl halides, providing excellent yields and good chemoselectivity. We have also explored the mechanism of the reaction using DFT studies.
Synthesis of thioethers, arenes and arylated benzoxazoles by transformation of the C(aryl)-C bond of aryl alcohols
Chen, Bingfeng,Han, Buxing,Liu, Mingyang,Meng, Qinglei,Song, Jinliang,Zhang, Pei,Zhang, Zhanrong
, p. 7634 - 7640 (2020/08/14)
Transformation of aryl alcohols into high-value functionalized aromatic compounds by selective cleavage and functionalization of the C(aryl)-C(OH) bond is of crucial importance, but very challenging by far. Herein, for the first time, we report a novel and versatile strategy for activation and functionalization of C(aryl)-C(OH) bonds by the cooperation of oxygenation and decarboxylative functionalization. A diverse range of aryl alcohol substrates were employed as arylation reagents via the cleavage of C(aryl)-C(OH) bonds and effectively converted into corresponding thioether, arene, and arylated benzoxazole products in excellent yields, in a Cu based catalytic system using O2 as the oxidant. This study offers a new way for aryl alcohol conversion and potentially offers a new opportunity to produce high-value functionalized aromatics from renewable feedstocks such as lignin which features abundant C(aryl)-C(OH) bonds in its linkages.
Microwave-Assisted Copper Slag-Catalyzed Green S-Arylation of Arenethiols with Arylboronic Acids
Gavane, D. S.,Jambhorkar, V. S.,Kale, B. D.,Karnik, K. S.,Khandare, A. L.,Narula, I. S.,Rajhans, A. P.,Sarkate, A. P.
, p. 1300 - 1303 (2020/10/02)
Abstract: Diaryl sulfides have been synthesized in moderate to excellent yield by S-arylation of arenethiols with arylboronic acids using copper slag as a catalyst. Copper slag is a by-product obtained from smelting and refining of copper. Conventional heating method has been compared with the microwave-assisted technique. The proposed microwave-assisted synthesis provides excellent yields of diaryl sulfides in a short time (10 min) and is ligand-free, green, and cost-effective.
Dechalcogenization of Aryl Dichalcogenides to Synthesize Aryl Chalcogenides via Copper Catalysis
Cao, Fei,Chen, Jinhong,Deng, Jiedan,Deng, Xuemei,Hou, Yongsheng,Shao, Xiangfeng,Shi, Tao,Wang, Yongqiang,Wang, Zhen,Wu, Lingxi,Yang, Jinru,Yang, Yuhang
, p. 2707 - 2712 (2020/03/11)
An application for dechalcogenization of aryl dichalcogenides via copper catalysis to synthesize aryl chalcogenides is disclosed. This approach is highlighted by the practical conditions, broad substrate scope, and good functional group tolerance with several sensitive groups such as aldehyde, ketone, ester, amide, cyanide, alkene, nitro, and methylsulfonyl. Furthermore, the robustness of this methodology is depicted by the late-stage modification of estrone and synthesis of vortioxetine. Remarkably, synthesis of more challenging organic materials with large ring tension under milder conditions and synthesis of some halogen contained diaryl sulfides which could not be synthesized using metal-catalyzed coupling reactions of aryl halogen are successfully accomplished with this protocol.
CuI-catalyzed direct synthesis of diaryl thioethers from aryl boronic acids and arylsulfonyl chlorides
Huang, Keke,Yang, Min,Lai, Xiao-Jing,Hu, Xin,Qiu, Guanyinsheng,Liu, Jin-Biao
, (2019/12/27)
A CuI-catalyzed direct coupling of aryl boronic acids with arylsulfonyl chlorides for the preparation of diaryl thioethers was developed. The reaction is initiated by a PPh3 reduction of the arylsulfonyl chloride, followed by a CuI-catalyzed C–S coupling with an aryl boronic acid. Various arylsulfonyl chlorides can directly serve as a sulfur source in this mild and efficient reaction giving the desired products in moderate to good yields. Moreover, this practical method has also been applied to the thioetherification of aryl iodides and acetylacetones.
