19293-58-4Relevant academic research and scientific papers
Simplified preparation of a graphene-co-shelled Ni/NiO@C nano-catalyst and its application in theN-dimethylation synthesis of amines under mild conditions
Liu, Jianguo,Ma, Longlong,Song, Yanpei,Zhang, Mingyue,Zhuang, Xiuzheng
supporting information, p. 4604 - 4617 (2021/06/30)
The development of Earth-abundant, reusable and non-toxic heterogeneous catalysts to be applied in the pharmaceutical industry for bio-active relevant compound synthesis remains an important goal of general chemical research.N-methylated compounds, as one of the most essential bioactive compounds, have been widely used in the fine and bulk chemical industries for the production of high-value chemicals. Herein, an environmentally friendly and simplified method for the preparation of graphene encapsulated Ni/NiO nanoalloy catalysts (Ni/NiO@C) was developed for the first time, for the highly selective synthesis ofN-methylated compounds using various functional amines and aldehydes under easy to handle, and industrially applicable conditions. A large number of primary and secondary amines (more than 70 examples) could be converted to the correspondingN,N-dimethylamines with the participation of different functional aldehydes, with an average yield of over 95%. A gram-scale synthesis also demonstrated a similar yield when compared with the benchmark test. In addition, it was further proved that the catalyst could easily be recycled because of its intrinsic magnetism and reused up to 10 times without losing its activity and selectivity. Also, for the first time, the tandem synthesis ofN,N-dimethylamine products in a one-pot process, using only a single earth-abundant metal catalyst, whose activity and selectivity were more than 99% and 94%, respectively, for all tested substrates, was developed. Overall, the advantages of this newly developed method include operational simplicity, high stability, easy recyclability, cost-effectiveness of the catalyst, and good functional group compatibility for the synthesis ofN-methylation products as well as the industrially applicable tandem synthesis process.
Ultra-small cobalt nanoparticles from molecularly-defined Co-salen complexes for catalytic synthesis of amines
Beller, Matthias,Chandrashekhar, Vishwas G.,Gawande, Manoj B.,Jagadeesh, Rajenahally V.,Kalevaru, Narayana V.,Kamer, Paul C. J.,Senthamarai, Thirusangumurugan,Zbo?il, Radek
, p. 2973 - 2981 (2020/03/27)
We report the synthesis of in situ generated cobalt nanoparticles from molecularly defined complexes as efficient and selective catalysts for reductive amination reactions. In the presence of ammonia and hydrogen, cobalt-salen complexes such as cobalt(ii)-N,N′-bis(salicylidene)-1,2-phenylenediamine produce ultra-small (2-4 nm) cobalt-nanoparticles embedded in a carbon-nitrogen framework. The resulting materials constitute stable, reusable and magnetically separable catalysts, which enable the synthesis of linear and branched benzylic, heterocyclic and aliphatic primary amines from carbonyl compounds and ammonia. The isolated nanoparticles also represent excellent catalysts for the synthesis of primary, secondary as well as tertiary amines including biologically relevant N-methyl amines.
Design, synthesis and the structure-activity relationship of agonists targeting on the ALDH2 catalytic tunnel
Cheng, Ming-Che,Lo, Wei-Chi,Chang, Yu-Wen,Lee, Shoei-Sheng,Chang, Chia-Chuan
, (2020/09/15)
ALDH2, a key enzyme in the alcohol metabolism process, detoxifies several kinds of toxic small molecular aldehydes, which induce severe organ damages. The development of novel Alda-1 type ALDH2 activators was mostly relied on HTS but not rational design so far. To clarify the structure–activity relationship (SAR) of the skeleton of Alda-1 analogs by synthesis of the least number of analogs, we prepared 31 Alda-1 analogs and 3 isoflavone derivatives and evaluated for their ALDH2-activating activity. Among these, the ALDH2-activating activity of mono-halogen-substituted (Cl and Br) N-piperonylbenzamides 3b and 3 k, and non-aromatic amides 8a-8c, were 1.5–2.1 folds higher than that of Alda-1 at 20 μM. The relationship between binding affinity in computer aided molecular docking model and the ALDH2-activating activity assays were clarified as follows: for Alda-1 analogs, with the formation of halogen bonds, the enzyme-activating activity was found to follow a specific regression curve within the range between ?5 kcal/mol and ?4 kcal/mol. For isoflavone derivatives, the basic moiety on the B ring enhance the activating activity. These results provide a new direction of utilizing computer-aided modeling to design novel ALDH2 agonists in the future.
Facile synthesis of controllable graphene-co-shelled reusable Ni/NiO nanoparticles and their application in the synthesis of amines under mild conditions
Cui, Zhibing,Liu, Jianguo,Liu, Qiying,Ma, Longlong,Singh, Thishana,Wang, Chenguang,Wang, Nan,Zhu, Yuting
supporting information, p. 7387 - 7397 (2020/11/19)
The primary objective of many researchers in chemical synthesis is the development of recyclable and easily accessible catalysts. These catalysts should preferably be made from Earth-abundant metals and have the ability to be utilised in the synthesis of pharmaceutically important compounds. Amines are classified as privileged compounds, and are used extensively in the fine and bulk chemical industries, as well as in pharmaceutical and materials research. In many laboratories and in industry, transition metal catalysed reductive amination of carbonyl compounds is performed using predominantly ammonia and H2. However, these reactions usually require precious metal-based catalysts or RANEY nickel, and require harsh reaction conditions and yield low selectivity for the desired products. Herein, we describe a simple and environmentally friendly method for the preparation of thin graphene spheres that encapsulate uniform Ni/NiO nanoalloy catalysts (Ni/NiO?C) using nickel citrate as the precursor. The resulting catalysts are stable and reusable and were successfully used for the synthesis of primary, secondary, tertiary, and N-methylamines (more than 62 examples). The reaction couples easily accessible carbonyl compounds (aldehydes and ketones) with ammonia, amines, and H2 under very mild industrially viable and scalable conditions (80 °C and 1 MPa H2 pressure, 4 h), offering cost-effective access to numerous functionalized, structurally diverse linear and branched benzylic, heterocyclic, and aliphatic amines including drugs and steroid derivatives. We have also demonstrated the scale-up of the heterogeneous amination protocol to gram-scale synthesis. Furthermore, the catalyst can be immobilized on a magnetic stirring bar and be conveniently recycled up to five times without any significant loss of catalytic activity and selectivity for the product.
Effects of ruthenium hydride species on primary amine synthesis by direct amination of alcohols over a heterogeneous Ru catalyst
Hara, Michikazu,Kamata, Keigo,Kita, Yusuke,Kuwabara, Midori,Yamadera, Satoshi
, p. 9884 - 9890 (2020/10/06)
Heterogeneously catalysed synthesis of primary amines by direct amination of alcohols with ammonia has long been an elusive goal. In contrast to reported Ru-based catalytic systems, we report that Ru-MgO/TiO2 acts as an effective heterogeneous catalyst for the direct amination of a variety of alcohols to primary amines at low temperatures of ca. 100 °C without the introduction of H2 gas. The present system could be applied to a variety of alcohols and provides an efficient synthetic route for 2,5-bis(aminomethyl)furan (BAMF), an attention-getting biomonomer. The high catalytic performance can be rationalized by the reactivity tuning of Ru-H species using MgO. Spectroscopic measurements suggest that MgO enhances the reactivity of hydride species by electron donation from MgO to Ru.
Copper catalyzed reduction of azides with diboron under mild conditions
Chen, Yang,Deng, Shengqi,Gao, Yihua,Liu, Liwen,Liu, Yu,Lu, Da,Wang, Qianwen,Zhang, Xiao
supporting information, (2020/02/27)
We report herein the first Cu catalyzed reduction of azides with B2pin2 (pin = pinacolato) as the reductant under very mild conditions. A series of primary amines and amides were obtained in moderate to excellent yields with high chemoselectivity and good functional group tolerance. This reaction can be performed with a cheap copper salt, a simple NHC ligand and a diboron reagent.
Method for preparing primary amine by catalyzing reductive amination of aldehyde ketone compounds
-
Paragraph 0027-0030; 0051-0055, (2020/05/30)
The invention discloses a method for preparing primary amine by catalyzing reductive amination of aldehyde ketone compounds. The method comprises the following steps: 1) mixing nickel nitrate hexahydrate, citric acid and an organic solvent, carrying out heating and stirring until a colloidal material is obtained, drying the colloidal material, roasting the colloidal material in a protective atmosphere, pickling, washing and drying a roasted product, and performing a partial oxidation reaction on a dried product in an oxygen-nitrogen mixed atmosphere to obtain a catalyst for a reductive amination reaction; and 2) mixing aldehyde or ketone compounds, a methanol solution of ammonia and the reductive amination reaction catalyst, introducing hydrogen, and carrying out a reductive amination reaction. The method has the advantages of high primary amine yield, high selectivity, wide aldehyde ketone substrate range, short reaction time, mild reaction conditions, low cost, greenness, economicalperformance and the like; the used reductive amination reaction catalyst can be recycled more than 10 times, and the catalytic activity of the catalyst is not obviously changed in gram-level reactions; and the method is suitable for large-scale application.
Hydrosilane Reduction of Nitriles to Primary Amines by Cobalt-Isocyanide Catalysts
Sanagawa, Atsushi,Nagashima, Hideo
supporting information, p. 287 - 291 (2019/01/10)
Reduction of nitriles to silylated primary amines was achieved by combination of 1,1,3,3-tetramethyldisiloxane (TMDS) as the hydrosilane and a catalytic amount of Co(OPIV)2 (PIV = COtBu) associated with isocyanide ligands. The resulting silylated amines were subjected to acid hydrolysis or treatment with acid chlorides to give the corresponding primary amines or imides in good yields. One-pot synthesis of primary amides to primary amines with hydrosilanes was also achieved by iron-cobalt dual catalyst systems.
Preparation of a magnetic mesoporous Fe3O4-Pd@TiO2 photocatalyst for the efficient selective reduction of aromatic cyanides
Zhao, Ziming,Long, Yu,Luo, Sha,Wu, Wei,Ma, Jiantai
, p. 6294 - 6302 (2019/04/25)
Herein, a hierarchical magnetic mesoporous microsphere was successfully prepared as a photocatalyst via a simple and reproducible route. Typically, Pd nanoparticles (NPs) were evenly dispersed on the surface of a magnetic Fe3O4 microsphere and then coated with a porous anatase-TiO2 shell to form Fe3O4-Pd@TiO2. The core-shell structure could efficiently suppress the conglomeration of Pd NPs during the calcination process at high temperatures as well as the shedding of Pd during the catalytic reaction process in the liquid phase. The as-prepared photocatalyst was characterized by TEM, XRD, XPS, VSM, and N2 adsorption-desorption. Fe3O4-Pd@TiO2 exhibits high photocatalytic activity for the selective reduction of aromatic cyanides to aromatic primary amines in an acidic aqueous solution. Moreover, this magnetic photocatalyst could be easily recovered from the reaction mixture by an external magnet and reused five times without significant reduction in its activity. The superior photocatalytic efficiency of the proposed photocatalyst may be attributed to its high charge separation efficiency and charge transfer rate, which are caused by the Schottky junction and large interface area. The results indicate that the strategy of coating the active noble metal sites with a mesoporous semiconductor shell has a significant potential for application in metal-semiconductor-based photocatalytic reactions.
Preparation of nitrogen-doped carbon supported cobalt catalysts and its application in the reductive amination
Yuan, Ziliang,Liu, Bing,Zhou, Peng,Zhang, Zehui,Chi, Quan
, p. 347 - 356 (2019/01/24)
The use of non-noble metal catalysts with high activity is of great importance for organic transformations. Herein, nitrogen-doped carbon supported cobalt catalysts with high surface area up to 981.2 m2/g were prepared via the simple pyrolysis of cobalt coordinated organic polymers with silica as the hard template. The pyrolysis temperature showed a great effect on the structure and properties of the as-prepared catalysts. The Co@NC-800 catalyst with the pyrolysis temperature of 800 °C demonstrated a high activity for the selective reductive amination of carbonyl compounds to primary amines with ammonia and hydrogen. Structurally-diverse primary amines with yields in the range from 81.8% to 100% were attained under the optimal conditions. The Co@NC-800 catalyst could be reused without the loss of its activity. The Co@NC-800 catalyst demonstrated comparable activity as the reported heterogeneous noble metal catalysts.
