Welcome to LookChem.com Sign In|Join Free
  • or
Butanoyl chloride, also known as 3-chlorobutanoyl chloride, is an organic compound with the chemical formula C4H7ClO. It is a colorless liquid that is soluble in organic solvents and has a pungent odor. Butanoyl chloride, 3-chloro- is primarily used as a chemical intermediate in the synthesis of various pharmaceuticals, agrochemicals, and other specialty chemicals. It is produced through the reaction of 3-chlorobutyric acid with thionyl chloride or phosphorus pentachloride. Due to its reactivity, butanoyl chloride is highly corrosive and can cause severe irritation or burns upon contact with skin, eyes, and respiratory tract. It is also considered a hazardous material and requires proper handling and storage to prevent environmental contamination and health risks.

1951-11-7

Post Buying Request

1951-11-7 Suppliers

Recommended suppliers

  • Product
  • FOB Price
  • Min.Order
  • Supply Ability
  • Supplier
  • Contact Supplier

1951-11-7 Usage

Check Digit Verification of cas no

The CAS Registry Mumber 1951-11-7 includes 7 digits separated into 3 groups by hyphens. The first part of the number,starting from the left, has 4 digits, 1,9,5 and 1 respectively; the second part has 2 digits, 1 and 1 respectively.
Calculate Digit Verification of CAS Registry Number 1951-11:
(6*1)+(5*9)+(4*5)+(3*1)+(2*1)+(1*1)=77
77 % 10 = 7
So 1951-11-7 is a valid CAS Registry Number.

1951-11-7SDS

SAFETY DATA SHEETS

According to Globally Harmonized System of Classification and Labelling of Chemicals (GHS) - Sixth revised edition

Version: 1.0

Creation Date: Aug 19, 2017

Revision Date: Aug 19, 2017

1.Identification

1.1 GHS Product identifier

Product name 3-chlorobutanoyl chloride

1.2 Other means of identification

Product number -
Other names 3-Chlorobutanoylchloride

1.3 Recommended use of the chemical and restrictions on use

Identified uses For industry use only.
Uses advised against no data available

1.4 Supplier's details

1.5 Emergency phone number

Emergency phone number -
Service hours Monday to Friday, 9am-5pm (Standard time zone: UTC/GMT +8 hours).

More Details:1951-11-7 SDS

1951-11-7Relevant academic research and scientific papers

Chlorocarbonylation of Unsaturated Substrates Catalysed by Palladium Complexes in the Presence of Anhydrous HCl

Benard, Nathalie,Bonnet, Michel C.,Lecolier, Serge,Tkatchenko, Igor

, p. 1448 - 1450 (2007/10/02)

Chloroacyl halides are obtained under mild conditions by catalytic carbonylation of allylic halides or ethene and allyl chloride under CO and anhydrous HCl pressure; excellent selectivities for formation of dichloroacyl and chloroacyl derivatives are achi

AN IMPROVED SYNTHESIS OF HEXAMETHYLPHENALENE

Boudjouk, Philip,Ohrbom, Walter H.,Woell, James B.

, p. 401 - 410 (2007/10/02)

The synthesis of 1,3,4,6,7,9-hexamethylphenalene (2) has been improved from 15 steps to a four step procedure.The overall yield has been increased from an estimated 5percent to 45percent.Key steps in the synthesis are the reaction of 3,5-dimethylbenzylmagnesium chloride with 2,4-pentanedioato lithium in THF to make 5-(3,5-dimethylphenyl)-4-methyl-4-hydroxy-2-pentanone (5) and the Lewis acid acylation-alkation of 1,3,6,8-tetramethylnaphthalene using 3-chlorobutanoic chloride in hexane with sonicaton to make 1,3,4,6,7,9-hexamethyl-phenalane (2).

Chlorination of Butyryl Chloride in the Liquid Phase

Korhonen, Ilpo O. O.

, p. 175 - 178 (2007/10/02)

The photochlorination of butyryl chloride in the liquid phase at room temperature has been studied.The progress of the chlorination was followed, the mono- and dichloro products being identified and estimated by GLC as their methyl esters.The isomer distribution has been studied in detail at different stages of chlorination.The main compounds identified in the reaction mixture were substrate until 0.5 h, 3-chlorobutyryl chloride between 0.5 and 2.5 h, 3,4-dichlorobutyryl chloride between 2.5 and 7.5 h, 3,3-dichlorobutyryl chloride between 7.5 and 10.0 h and 4,4-dichlorobutyryl chloride after chlorination for 10.0 h.Polychloro compounds were, however, the main products towards the end of the process.

Interaction of Cyclopropane with Platinum-Metal Chlorides under Carbon Monoxide Pressure in Benzene

Johnson, Thomas J.,Baldwin, Thomas F.

, p. 140 - 142 (2007/10/02)

The six platinum-metal chlorides were reacted with cyclopropane in benzene under carbon monoxide pressure to produce propyl benzenes and, in three instances, chlorobutyrates.The isomer of propylbenzene obtained ranged from pure n-propylbenzene from PdCl2 to pure isopropylbenzene for OsCl3 and IrCl3.The other three platinum-metal chlorides gave mixture of the two propylbenzenes.The reaction was shown to be specific for benzene and cyclopropane as chlorobenzene and toluene failed to enter into the reaction.Likewise, methylcyclopropane did not react with benzene to produce butylbenzenes.

Post a RFQ

Enter 15 to 2000 letters.Word count: 0 letters

Attach files(File Format: Jpeg, Jpg, Gif, Png, PDF, PPT, Zip, Rar,Word or Excel Maximum File Size: 3MB)

1 Customer Service

What can I do for you?
Get Best Price

Get Best Price for 1951-11-7