24318-41-0Relevant academic research and scientific papers
Half-Sandwich Ruthenium Complexes Bearing Hemilabile κ2-(C,S)?Thioether-Functionalized NHC Ligands: Application to Amide Synthesis from Alcohol and Amine
Achard, Thierry,Bellemin-Laponnaz, Stéphane,Chen, Weighang,Egly, Julien,Maisse-Fran?ois, Aline
supporting information, (2022/01/20)
Amide synthesis is one of the most crucial transformations in chemistry and biology. Among various catalytic systems, N-heterocyclic carbene (NHC)-based ruthenium (Ru) catalyst systems have been proven to be active for direct synthesis of amides by sustainable acceptorless dehydrogenative Coupling of primary alcohols with amines. Most often, these catalytic systems usually use monodentate NHC and thus require an additional ligand to obtain high reactivity and selectivity. In this work, a series of cationic Ru(II)(η6-p-cymene) complexes with thioether-functionalized N-heterocyclic carbene ligands (imidazole and benzimidazole-based) have been prepared and fully characterized. These complexes have then been used in the amidation reaction and the most promising one (i. e. 3 c) has been applied on a large range of substrates. High conversions albeit with moderate yields have generally been obtained.
Catalytic conversion of ketones to esters: Via C(O)-C bond cleavage under transition-metal free conditions
Subaramanian, Murugan,Ramar, Palmurukan M.,Rana, Jagannath,Gupta, Virendra Kumar,Balaraman, Ekambaram
supporting information, p. 8143 - 8146 (2020/09/09)
The catalytic conversion of ketones to esters via C(O)-C bond cleavage under transition-metal free conditions is reported. This catalytic process proceeds under solvent-free conditions and offers an easy operational procedure, broad substrate scope with excellent selectivity, and reaction scalability. This journal is
IrIII-Catalyzed direct syntheses of amides and esters using nitriles as acid equivalents: A photochemical pathway
Talukdar, Ranadeep
supporting information, p. 5303 - 5308 (2020/04/17)
An unprecedented IrIII[df(CF3)ppy]2(dtbbpy)PF6-catalyzed simple photochemical process for direct addition of amines and alcohols to the relatively less reactive nitrile triple bond is described herein. Various amides and esters are synthesized as the reaction products, with nitriles being the acid equivalents. A mini-library of different types of amides and esters is made using this mild and efficient process, which uses only 1 mol% of photocatalyst under visible light irradiation (λ = 445 nm). The reaction strategy is also efficient for gram-scale synthesis.
Ester Formation via Symbiotic Activation Utilizing Trichloroacetimidate Electrophiles
Mahajani, Nivedita S.,Meador, Rowan I. L.,Smith, Tomas J.,Canarelli, Sarah E.,Adhikari, Arijit A.,Shah, Jigisha P.,Russo, Christopher M.,Wallach, Daniel R.,Howard, Kyle T.,Millimaci, Alexandra M.,Chisholm, John D.
, p. 7871 - 7882 (2019/06/27)
Trichloroacetimidates are useful reagents for the synthesis of esters under mild conditions that do not require an exogenous promoter. These conditions avoid the undesired decomposition of substrates with sensitive functional groups that are often observed with the use of strong Lewis or Br?nsted acids. With heating, these reactions have been extended to benzyl esters without electron-donating groups. These inexpensive and convenient methods should find application in the formation of esters in complex substrates.
Bu 4 NI-Catalyzed C-C Bond Cleavage and Oxidative Esteri??cation of Allyl Alcohols with Toluene Derivatives
Chen, Yaoyao,Cui, Yongmei,Jia, Xueshun,Li, Chengliang,Li, Jian,Sun, Mingming
, p. 3667 - 3674 (2019/09/30)
A novel oxidative esterification of 1-arylprop-2-en-1-ols with toluene derivatives catalyzed by tetrabutylammonium iodide (TBAI) is reported. The optimization of the reaction conditions illustrates that each of experiment parameters including the catalyst, solvent, and oxidant is significant for present oxidative functionalization. This metal-free protocol has a broad substrate scope including the halogen groups for further functionalization and enriches the reactivity profile of allyl alcohol and toluene derivatives. In addition, this protocol represents a new transformation of allyl alcohol involving C-C bond cleavage and C-O bond forming.
A metal-free approach for the synthesis of amides/esters with pyridinium salts of phenacyl bromides via oxidative C–C bond cleavage
Manasa, Kesari Lakshmi,Tangella, Yellaiah,Krishna, Namballa Hari,Alvala, Mallika
, p. 1864 - 1871 (2019/08/12)
An efficient, simple, and metal-free synthetic approach for the N- and O-benzoylation of various amines/benzyl alcohols with pyridinium salts of phenacyl bromides is demonstrated to generate the corresponding amides and esters. This protocol facilitates the oxidative cleavage of a C–C bond followed by formation of a new C–N/C–O bond in the presence of K2CO3. Various pyridinium salts of phenacyl bromides can be readily transformed into a variety of amides and esters which is an alternative method for the conventional amidation and esterification in organic synthesis. High functional group tolerance, broad substrate scope and operational simplicity are the prominent advantages of the current protocol.
Base-Promoted Amidation and Esterification of Imidazolium Salts via Acyl C-C bond Cleavage: Access to Aromatic Amides and Esters
Karthik, Shanmugam,Muthuvel, Karthick,Gandhi, Thirumanavelan
, p. 738 - 751 (2019/01/24)
Imidazolium salts have been effectively employed as suitable acyl transfer agents in amidation and esterification in organic synthesis. The weak acyl C(O)-C imidazolium bond was exploited to generate acyl electrophiles, which further react with amines and alcohols to afford amides and esters. The broad substrate scope of anilines and benzylic amines and base-promoted conditions are the benefits of this route. Interestingly, phenol, benzylic alcohols, and a biologically active alcohol can also be subjected to esterification under the optimized conditions.
Esterification of Tertiary Amides by Alcohols Through C?N Bond Cleavage over CeO2
Toyao, Takashi,Nurnobi Rashed, Md.,Morita, Yoshitsugu,Kamachi, Takashi,Hakim Siddiki,Ali, Md. A.,Touchy,Kon, Kenichi,Maeno, Zen,Yoshizawa, Kazunari,Shimizu, Ken-ichi
, p. 449 - 456 (2018/09/11)
CeO2 has been found to promote ester forming alcoholysis reactions of tertiary amides. The present catalytic system is operationally simple, recyclable, and it does not require additives. The esterification process displays a wide substrate scope (>45 examples; up to 93 % isolated yield). Results of a density functional theory (DFT) study combined with in situ FT-IR observations indicate that the process proceeds through rate limiting addition of a CeO2 lattice oxygen to the carbonyl group of the adsorbed acetamide species with energy barrier of 17.0 kcal/mol. This value matches well with experimental value (17.9 kcal/mol) obtained from analysis of the Arrhenius plot. Further studies by in situ FT-IR and temperature programmed desorption using probe molecules demonstrate that both acidic and basic properties are important, and consequently, CeO2 showed the best performance for the C?N bond cleavage reaction.
Simple and rapid p-methoxybenzylation of hydroxy and amide groups at room temperature by NaOt-Bu and DMSO
Hamada, Shohei,Sugimoto, Koichi,Iida, Masashi,Furuta, Takumi
supporting information, (2019/11/13)
The p-methoxybenzylation of hydroxy and amide groups by p-methoxybenzyl chloride utilizing NaOt-Bu in DMSO is described. p-Methoxybenzylation of sterically hindered menthol using NaOt-Bu in DMSO proceeded faster than the commonly used methods which use Na
Systematic Evaluation of Sulfoxides as Catalysts in Nucleophilic Substitutions of Alcohols
Motsch, Sebastian,Schütz, Christian,Huy, Peter H.
supporting information, p. 4541 - 4547 (2018/09/13)
Herein, a method for the nucleophilic substitution (SN) of benzyl alcohols yielding chloro alkanes is introduced that relies on aromatic sulfoxides as Lewis base catalysts (down to 1.5 mol-%) and benzoyl chloride (BzCl) as reagent. A systematic screening of various sulfoxides and other sulfinyl containing Lewis bases afforded (2-methoxyphenyl)methyl sulfoxide as optimal catalyst. In contrast to reported formamide catalysts, sulfoxides also enable the application of plain acetyl chloride (AcCl) as reagent. In addition, it was demonstrated that weakly electrophilic carboxylic acid chlorides like BzCl promote Pummerer rearrangement of sulfoxides already at room temperature. This side-reaction also provided the explanation, why sulfoxide catalyzed SN-reactions of alcohols do not allow the effective production of aliphatic and electron deficient chloro alkanes. Comparison experiments provided further insight into the reaction mechanism.
