36586-16-0

Upstream product

• 536-74-3 phenylacetylene 
• 2372-45-4 sodium butanolate 
• 591-50-4 iodobenzene 
• 111-34-2 -butyl vinyl ether 
• 98-88-4 benzoyl chloride 
• 108-86-1 bromobenzene 
• 101910-96-7 2-Bromoethenyl butyl ether 
• 108-90-7 chlorobenzene 
• 3240-34-4 [bis(acetoxy)iodo]benzene 
• 65-85-0 benzoic acid 

Relevant academic research and scientific papers

Pd catalysis on dendronized solid support: Generation effects and the influence of the backbone structure

Recent studies revealed that catalysts, prepared on dendronized support, frequently exhibit enhanced activity and selectivity as compared to their non-dendronized analogues. Regretfully, in early studies of the supported dendritic catalysis, no particular attention was paid to the coordinative nature of the dendritic backbone. In this study, we functionalized Wang polystyrene support with three types of dendritic templates: poly(aril benzyl ether), poly(aryl benzyl thioether), and poly(aryl benzyl amine). These dendronized resins were further decorated with phosphine ligands on the periphery and complexed with a Pd(0) catalytic precursor. The catalysis of the Heck and Suzuki reactions of bromobenzene with the first to third generation supported dendritic catalysts was examined and compared to that of the non-dendritic analogues. All of the examined reactions revealed a positive dendritic effect, reflected in up to 5-fold increase in yield, in the most prominent case. The reasons for the observed effect are the proximity of the ligating sites translated into reduced cross-linking and, probably, the increased distance of the catalyst from the polymer matrix. We proved, however, that the latter could not be achieved with a linear spacer. Although the Suzuki reaction was rather insensitive to the backbone structure, the Heck reaction catalysis at 80°C exhibited substantial sensitivity to the nature of the dendritic backbone, with the polyether structure demonstrating the best outcome. This is the first demonstration of the influence of the coordinative ability of the backbone on the activity of a supported dendritic catalyst.

Ligand-free reusable palladium-catalyzed heck-type coupling reactions of hypervalent iodine reagents under mild conditions

Highly effective palladium-catalyzed Heck-type couplings of hypervalent iodine reagents are reported for the first time. It is noteworthy that such reactions could be carried out in the absence of ligand at 40 °C and the catalytic system could be easily reused for five times. Copyright

Aminophosphine palladium pincer complexes for Suzuki and Heck reactions

The aminophosphine-based pincer complexes [C6H 3-2,6-{NHP(piperidinyl)2}2Pd(CI)] (2) and [C6H3-2,6-{OP(piperidinyl)2}2Pd(CI)] (3) are readily prepared from cheap starting materials by sequential addition of 1,1′,1 "-phosphinetriyltripiperidine and 1,3-diaminobenzene or resorcinol to solutions of [Pd(cod)(CI)2] (cod = cyclooctadiene) in toluene under N2 in 'one pot'. Compounds 2 and 3 proved to be not only excellent catalysts for the Suzuki and the Heck cross-coupling reactions, but they are also very convenient to use: The toluene solutions of the 'one-pot' syntheses can be used directly for the catalytic reactions, thereby saving the time-consuming isolation of the catalysts. The Suzuki cross-coupling reaction catalyzed by 2 and 3 can be performed in air at 100 °C in toluene of technical quality: in the presence of only 0.001 mol% of catalyst, several electronically deactivated and sterically hindered aryl bromides are quantitatively coupled with phenylboronic acid within a few minutes of reaction time. Furthermore, complex 2 enables the use of activated and non-activated aryl chlorides as coupling partners in the Suzuki reaction. Compounds 2 and 3 have also been shown to be highly active and reliable Heck catalysts: Very low catalyst loadings and short reaction times are required for the quantitative coupling of several electronically deactivated and sterically hindered aryl bromides with various olefins at 140 °C. At increased temperatures, even electronically deactivated and sterically hindered aryl chlorides can be efficiently coupled with olefins in the presence of only 0.01 mol% of catalyst. Schweizerische Chemische Gesellschaft.

Rationally designed pincer-type heck catalysts bearing aminophosphine substituents: PdIV intermediates and palladium nanoparticles

The aminophosphine-based pincer complexes [C6H 3-2,6-{XP(piperidinyl)2}2Pd(Cl)] (X = NH 1; X = O 2) are readily prepared from cheap starting materials by sequential addition of 1,1′,1″-phosphinetriyltripiperidine and 1,3-diaminobenzene or resorcinol to solutions of [Pd(cod)(Cl)2] (cod = cyclooctadiene) in toluene under N2 in "one pot". Compounds 1 and 2 proved to be excellent Heck catalysts and allow the quantitative coupling of several electronically deactivated and sterically hindered aryl bromides with various olefins as coupling partners at 140°C within very short reaction times and low catalyst loadings. Increased reaction temperatures also enable the efficient coupling of olefins with electronically deactivated and sterically hindered aryl chlorides in the presence of only 0.01 mol% of catalyst. The mechanistic studies performed rule out that homogeneous Pd0 complexes are the catalytically active forms of 1 and 2. On the other hand, the involvement of palladium nanoparticles in the catalytic cycle received strong experimental support. Even though pincer-type PdIV intermediates derived from 1 (and 2) are not involved in the catalytic cycle of the Heck reaction, their general existence as reactive intermediates (for example, in other reactions) cannot be excluded. On the contrary, they were shown to be thermally accessible. Compounds 1 and 2 show a smooth halide exchange with bromobenzene to yield their bromo derivatives in DMF at 100°C. Experimental observations revealed that the halide exchange most probably proceeded via pincer-type PdIV intermediates. DFT calculations support this hypothesis and indicated that aminophosphine-based pincer-type PdIV intermediates are generally to be considered as reactive intermediates in reactions with aryl halides performed at elevated temperatures.

Palladium/magnesium-lanthanum mixed oxide catalyst in the heck reaction

A new, reusable palladium/magnesium-lanthanum mixed oxide catalyst has been found to exhibit unprecedented high catalytic activity and selectivity for the heterogeneous Heck cross-coupling reaction of aryl halides with alkenes. The nature of the aryl halides has a determinate effect on the reaction yield. The corresponding reactions of a wide range of activated and non-activated aryl bromides and chlorides furnished the arylated product with high E/Z isomer ratios even already at 80°C. The stereoselectivity depended on the nature of the olefins.

Remarkable dendritic effect in the polymer-supported catalysis of the heck arylation of olefins

(Matrix presented) Phosphine-palladium complexes, immobilized on polystyrene, demonstrated a remarkable increase in catalytic activity and selectivity in the Heck reaction upon the introduction of a dendritic spacer between the support and phosphine. For some reactions an up to 5-fold increase in yield is observed.

A new efficient tetraphosphine/palladium catalyst for the Heck reaction of aryl halides with styrene or vinylether derivatives

cis,cis,cis-1,2,3,4-Tetrakis(diphenylphosphinomethyl)cyclopentane/[PdCl(C 3H5)]2 system efficiently catalyses the Heck reaction of aryl halides with styrene and vinylether derivatives. High turnover numbers can be obtained for the reaction of several aryl halides with styrene and styrene derivatives. Lower turnover numbers have been observed in the presence of vinylethers.

Palladium-catalyzed regioselective arylation of an electron-rich olefin by aryl halides in ionic liquids

equation presented Palladium-catalyzed arylation of the electron-rich olefin butyl vinyl ether has been accomplished in the ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF4]), using as the arylating agents aryl iodides and bromides instead of the commonly used, but commercially unavailable and expensive, aryl triflates. The reaction proceeds with high efficiency and remarkable regioselectivity, leading almost exclusively to substitution by various aryl groups at the olefinic carbon α to the heteroatom of butyl vinyl ether.

Heck reaction catalyzed by Pd-modified zeolites

[Pd]-exchanged NaY zeolites have been prepared, characterized, and applied for the first time for catalytic carbon-carbon coupling reactions. The catalysts exhibit a high activity and selectivity toward the Heck reaction of aryl bromides with olefins for small palladium concentrations (≥0.1 mol % of Pd). The catalysts can easily be separated from the reaction mixture and reused after washing without loss in activity. No limitation to the diffusion of adducts in the zeolite cages was observed (for linear alkenes). The electronic nature of the aryl bromides and the olefins has a dominating effect on the reaction yield and selectivity. The heterogeneous catalysts quantitatively convert all types of all aryl bromide (complete conversion of bromobenzene within 30 min) and activated aryl chlorides under standard reaction conditions. Product form selectivity is observed in the Heck reaction with cyclic olefins.