3959-07-7Relevant academic research and scientific papers
Self-regulated catalysis for the selective synthesis of primary amines from carbonyl compounds
Fan, Xiaomeng,Gao, Jin,Gao, Mingxia,Jia, Xiuquan,Ma, Jiping,Xu, Jie
supporting information, p. 7115 - 7121 (2021/09/28)
Most current processes for the general synthesis of primary amines by reductive amination are performed with enormously excessive amounts of hazardous ammonia. It remains unclear how catalysts should be designed to regulate amination reaction dynamics at a low ammonia-to-substrate ratio for the quantitative synthesis of primary amines from the corresponding carbonyl compounds. Herein we show a facile control of the reaction selectivity in the layered boron nitride supported ruthenium catalyzed reductive amination reaction. Specifically, locating ruthenium to the edge surface of layered boron nitride leads to an increased hydrogenation activity owing to the enhanced interfacial electronic effects between ruthenium and the edge surface of boron nitride. This enables self-accelerated reductive amination reactions which quantitatively synthesize structurally diverse primary amines by reductive amination of carbonyl compounds with twofold ammonia. This journal is
A State-of-the-Art Heterogeneous Catalyst for Efficient and General Nitrile Hydrogenation
Formenti, Dario,Mocci, Rita,Atia, Hanan,Dastgir, Sarim,Anwar, Muhammad,Bachmann, Stephan,Scalone, Michelangelo,Junge, Kathrin,Beller, Matthias
supporting information, p. 15589 - 15595 (2020/10/02)
Cobalt-doped hybrid materials consisting of metal oxides and carbon derived from chitin were prepared, characterized and tested for industrially relevant nitrile hydrogenations. The optimal catalyst supported onto MgO showed, after pyrolysis at 700 °C, magnesium oxide nanocubes decorated with carbon-enveloped Co nanoparticles. This special structure allows for the selective hydrogenation of diverse and demanding nitriles to the corresponding primary amines under mild conditions (e.g. 70 °C, 20 bar H2). The advantage of this novel catalytic material is showcased for industrially important substrates, including adipodinitrile, picolinonitrile, and fatty acid nitriles. Notably, the developed system outperformed all other tested commercial catalysts, for example, Raney Nickel and even noble-metal-based systems in these transformations.
A cobalt phosphide catalyst for the hydrogenation of nitriles
Jitsukawa, Koichiro,Mitsudome, Takato,Mizugaki, Tomoo,Nakata, Ayako,Sheng, Min,Yamasaki, Jun
, p. 6682 - 6689 (2020/08/24)
The study of metal phosphide catalysts for organic synthesis is rare. We present, for the first time, a well-defined nano-cobalt phosphide (nano-Co2P) that can serve as a new class of catalysts for the hydrogenation of nitriles to primary amines. While earth-abundant metal catalysts for nitrile hydrogenation generally suffer from air-instability (pyrophoricity), low activity and the need for harsh reaction conditions, nano-Co2P shows both air-stability and remarkably high activity for the hydrogenation of valeronitrile with an excellent turnover number exceeding 58000, which is over 20- to 500-fold greater than that of those previously reported. Moreover, nano-Co2P efficiently promotes the hydrogenation of a wide range of nitriles, which include di- and tetra-nitriles, to the corresponding primary amines even under just 1 bar of H2 pressure, far milder than the conventional reaction conditions. Detailed spectroscopic studies reveal that the high performance of nano-Co2P is attributed to its air-stable metallic nature and the increase of the d-electron density of Co near the Fermi level by the phosphidation of Co, which thus leads to the accelerated activation of both nitrile and H2. Such a phosphidation provides a promising method for the design of an advanced catalyst with high activity and stability in highly efficient and environmentally benign hydrogenations. This journal is
Nitrile Synthesis by Aerobic Oxidation of Primary Amines and in situ Generated Imines from Aldehydes and Ammonium Salt with Grubbs Catalyst
Utsumi, Tatsuki,Noda, Kenta,Kawauchi, Daichi,Ueda, Hirofumi,Tokuyama, Hidetoshi
supporting information, p. 3583 - 3588 (2020/08/05)
Herein, a Grubbs-catalyzed route for the synthesis of nitriles via the aerobic oxidation of primary amines is reported. This reaction accommodates a variety of substrates, including simple primary amines, sterically hindered β,β-disubstituted amines, allylamine, benzylamines, and α-amino esters. Reaction compatibility with various functionalities is also noted, particularly with alkenes, alkynes, halogens, esters, silyl ethers, and free hydroxyl groups. The nitriles were also synthesized via the oxidation of imines generated from aldehydes and NH4OAc in situ. (Figure presented.).
Ultra-small cobalt nanoparticles from molecularly-defined Co-salen complexes for catalytic synthesis of amines
Beller, Matthias,Chandrashekhar, Vishwas G.,Gawande, Manoj B.,Jagadeesh, Rajenahally V.,Kalevaru, Narayana V.,Kamer, Paul C. J.,Senthamarai, Thirusangumurugan,Zbo?il, Radek
, p. 2973 - 2981 (2020/03/27)
We report the synthesis of in situ generated cobalt nanoparticles from molecularly defined complexes as efficient and selective catalysts for reductive amination reactions. In the presence of ammonia and hydrogen, cobalt-salen complexes such as cobalt(ii)-N,N′-bis(salicylidene)-1,2-phenylenediamine produce ultra-small (2-4 nm) cobalt-nanoparticles embedded in a carbon-nitrogen framework. The resulting materials constitute stable, reusable and magnetically separable catalysts, which enable the synthesis of linear and branched benzylic, heterocyclic and aliphatic primary amines from carbonyl compounds and ammonia. The isolated nanoparticles also represent excellent catalysts for the synthesis of primary, secondary as well as tertiary amines including biologically relevant N-methyl amines.
Ambient-Temperature Synthesis of Primary Amines via Reductive Amination of Carbonyl Compounds
Xie, Chao,Song, Jinliang,Hua, Manli,Hu, Yue,Huang, Xin,Wu, Haoran,Yang, Guanying,Han, Buxing
, p. 7763 - 7772 (2020/08/21)
Efficient synthesis of primary amines via low-temperature reductive amination of carbonyl compounds using NH3 and H2 as the nitrogen and hydrogen resources is highly desired and challenging in the chemistry community. Herein, we employed naturally occurring phytic acid as a renewable precursor to fabricate titanium phosphate (TiP)-supported Ru nanocatalysts with different reduction degrees of RuO2 (Ru/TiP-x, x represents the reduction temperature) by combining ball milling and molten-salt processes. Very interestingly, the obtained Ru/TiP-100 had good catalytic performance for the reductive amination of carbonyl compounds at ambient temperature, resulting from the synergistic cooperation of the support (TiP) and the Ru/RuO2 with a suitable proportion of Ru0 (52%). Various carbonyl compounds could be efficiently converted into the corresponding primary amines with high yields. More importantly, the conversion of other substrates with reducible groups could also be achieved at ambient temperature. Detailed investigations indicated that the partially reduced Ru and the support (TiP) were indispensable. The high activity and selectivity of Ru/TiP-100 catalyst originates from the relatively high acidity and the suitable electron density of metallic Ru0.
The Synthesis of Primary Amines through Reductive Amination Employing an Iron Catalyst
B?umler, Christoph,Bauer, Christof,Kempe, Rhett
, p. 3110 - 3114 (2020/06/01)
The reductive amination of ketones and aldehydes by ammonia is a highly attractive method for the synthesis of primary amines. The use of catalysts, especially reusable catalysts, based on earth-abundant metals is similarly appealing. Here, the iron-catalyzed synthesis of primary amines through reductive amination was realized. A broad scope and a very good tolerance of functional groups were observed. Ketones, including purely aliphatic ones, aryl–alkyl, dialkyl, and heterocyclic, as well as aldehydes could be converted smoothly into their corresponding primary amines. In addition, the amination of pharmaceuticals, bioactive compounds, and natural products was demonstrated. Many functional groups, such as hydroxy, methoxy, dioxol, sulfonyl, and boronate ester substituents, were tolerated. The catalyst is easy to handle, selective, and reusable and ammonia dissolved in water could be employed as the nitrogen source. The key is the use of a specific Fe complex for the catalyst synthesis and an N-doped SiC material as catalyst support.
Scope and limitations of reductive amination catalyzed by half-sandwich iridium complexes under mild reaction conditions
Nguyen, Dat P.,Sladek, Rudolph N.,Do, Loi H.
supporting information, (2020/07/15)
The conversion of aldehydes and ketones to 1° amines could be promoted by half-sandwich iridium complexes using ammonium formate as both the nitrogen and hydride source. To optimize this method for green chemical synthesis, we tested various carbonyl substrates in common polar solvents at physiological temperature (37 °C) and ambient pressure. We found that in methanol, excellent selectivity for the amine over alcohol/amide products could be achieved for a broad assortment of carbonyl-containing compounds. In aqueous media, selective reduction of carbonyls to 1° amines was achieved in the absence of acids. Unfortunately, at Ir catalyst concentrations of 1 mM in water, reductive amination efficiency dropped significantly, which suggest that this catalytic methodology might be not suitable for aqueous applications where very low catalyst concentration is required (e.g., inside living cells).
Green and convenient protocols for the efficient reduction of nitriles and nitro compounds to corresponding amines with NaBH4 in water catalyzed by magnetically retrievable CuFe2O4 nanoparticles
Zeynizadeh, Behzad,Mohammad Aminzadeh, Farkhondeh,Mousavi, Hossein
, (2019/03/23)
Abstract: In this study, firstly, CuFe2O4 nanoparticles were prepared by a simple operation. The structure of the mentioned nanoparticles was characterized by Fourier transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy, inductively coupled plasma-optical emission spectrometry, vibrating sample magnetometer and also Brunauer–Emmett–Teller and Barrett–Joyner–Halenda analyses. The prepared magnetically copper ferrite nanocomposite was successfully applied as a simple, cost-effective, practicable, and recoverable catalyst on the green, highly efficient, fast, base-free, and ligand-free reduction of nitriles and also on the affordable and eco-friendly reduction of nitro compounds with the broad substrate scope to the corresponding amines with NaBH4 in water at reflux in high to excellent yields. Graphical abstract: [Figure not available: see fulltext.].
Facile synthesis of supported Ru-Triphos catalysts for continuous flow application in selective nitrile reduction
Konrath, Robert,Heutz, Frank J.L.,Steinfeldt, Norbert,Rockstroh, Nils,Kamer, Paul C.J.
, p. 8195 - 8201 (2019/09/19)
The selective catalytic hydrogenation of nitriles represents an important but challenging transformation for many homogeneous and heterogeneous catalysts. Herein, we report the efficient and modular solid-phase synthesis of immobilized Triphos-type ligands in very high yields, involving only minimal work-up procedures. The corresponding supported ruthenium-Triphos catalysts are tested in the hydrogenation of various nitriles. Under mild conditions and without the requirement of additives, the tunable supported catalyst library provides selective access to both primary amines and secondary imines. Moreover, the first application of a Triphos-type catalyst in a continuous flow process is presented demonstrating high catalyst life-time over at least 195 hours without significant activity loss.
