46836-99-1Relevant articles and documents
Magnetically recoverable ferromagnetic 3D hierarchical core-shell Fe3O4@NiO/Co3O4 microspheres as an efficient and ligand-free catalyst for C–S bond formation in poly (ethylene glycol)
Vatandoust Namanloo, Ahad,Akhlaghinia, Batool,Mohammadinezhad, Arezou
, p. 446 - 461 (2020/05/13)
A simple and efficient protocol for the synthesis of diaryl thioethers from the reaction of thiourea with a wide variety of aryl halides, including aryl iodides, aryl bromides and aryl chlorides in the presence of 3D hierarchical core-shell Fe3O4@NiO/Co3O4 microspheres has been described. This reaction enables the one-pot synthesis of diaryl thioethers in good to high yields using a non-toxic and magnetically separable catalyst in PEG-400 as an eco-friendly, safe, inexpensive and thermally stable solvent. Magnetic separation and reusability of catalyst for eight times without any significant loss of activity, the use of a commercially available, eco-friendly, cheap and chemically stable sulfur transfer agent and solvent, operational simplicity, environmentally benign, easier work-up procedure and cost efficiency make this method a promising candidate for potential applications in some organic reactions. The catalytic activity of Fe3O4@NiO/Co3O4 as a novel and inexpensive catalyst was investigated in the C-S cross coupling reaction.
Copper-catalyzed diastereoselective hydrothioetherification of oxa(aza)benzonorbornadienes
Chen, Donghan,Chen, Shuqi,Lin, Qifu,Tan, Yun,Yang, Dingqiao,Yang, Wen,Yao, Yongqi
, p. 3575 - 3584 (2020/06/10)
A novel copper-catalyzed hydrothioetherification of oxa(aza)bicyclic alkenes with potassium thioacetate and aryl or alkyl iodides to synthesize unsymmetrical thioethers has been developed. Notably, the reaction with complete diastereoselectivity went through a syn-selective addition process to give exo-adducts. In addition, this protocol exhibited high efficiency and good functional group tolerance to afford the target thioethers in moderate to good yields. Based on the results of mechanistic investigations, a plausible mechanism was proposed.
CuI anchored onto mesoporous SBA-16 functionalized by aminated 3-glycidyloxypropyltrimethoxysilane with thiosemicarbazide (SBA-16/GPTMS-TSC-CuI): A heterogeneous mesostructured catalyst for: S -arylation reaction under solvent-free conditions
Ghodsinia, Sara S.E.,Akhlaghinia, Batool
, p. 3029 - 3049 (2019/06/17)
Herein, we report the novel synthesis of CuI anchored onto a cage-like mesoporous material (SBA-16), which was successfully functionalized by aminated 3-glycidyloxypropyltrimethoxysilane with thiosemicarbazide (SBA-16/GPTMS-TSC-CuI) into an efficient and highly recyclable heterogeneous catalyst. The as-synthesized mesostructured catalyst (SBA-16/GPTMS-TSC-CuI) was comprehensively characterized by different techniques, namely, FT-IR, FIR, SAXRD, XRD, XPS, BET, TEM, FE-SEM, EDX, EDX mapping, TGA, ICP-OES, and CHNS analyses. SBA-16 with a unique "super-cage" structure efficiently controlled the formation of dispersed organic and metal species in the mesoporous channels. These confined nanoparticles with a narrow particle size distribution (3-7 nm) exhibited excellent catalytic activity in the S-arylation reaction without necessitating the use of toxic solvents and/or expensive metal catalysts. Interestingly, the mesoporous catalyst was extremely stable under the reaction conditions and could be easily separated by a simple filtration process and reused for at least seven recycle runs (without any appreciable loss in catalytic activity). Due to the inimitable structure of the abovementioned mesostructured catalyst, the C-S coupling products of aryl halides with S8/thiourea under solvent-free conditions were obtained in good to excellent yields in remarkably reduced reaction times in comparison to those reported in earlier studies.
NiFe2O4 as a magnetically recoverable nanocatalyst for odourless C–S bond formation via the cleavage of C–O bond in the presence of S8 under mild and green conditions
Atashkar, Bahareh,Rostami, Amin,Rostami, Abed,Zolfigol, Mohammad Ali
, (2019/01/24)
We present green methodologies for one-pot and odourless syntheses of unsymmetric and symmetric diaryl sulfides via C─O bond activation using NiFe2O4 magnetic nanoparticles as a reusable heterogeneous nanocatalyst. The synthesis of unsymmetric sulfides is performed using the cross-coupling reaction of phenolic esters such as acetates, triflates and tosylates with arylboronic acid/S8 or triphenyltin chloride/S8 as thiolating agents in the presence of base and NiFe2O4 magnetic nanoparticles as a catalyst in poly(ethylene glycol) as solvent at 60–85°C. Also, the synthesis of symmetric diaryl sulfides from phenolic compounds using S8 as the sulfur source and NiFe2O4 as catalyst in dimethylformamide at 120°C is described. Using these protocols, the syntheses of various unsymmetric and symmetric sulfides become easier than using the available protocols due to the use of a magnetically reusable bimetallic nanocatalyst and avoiding the use of thiols and aryl halides.
Proton-Activated “Off–On” Room-Temperature Phosphorescence from Purely Organic Thioethers
Huang, Linkun,Chen, Biao,Zhang, Xuepeng,Trindle, Carl O.,Liao, Fan,Wang, Yucai,Miao, Hui,Luo, Yi,Zhang, Guoqing
supporting information, p. 16046 - 16050 (2018/11/23)
Room-temperature phosphorescence (RTP)-based sensors have distinctive advantages over the fluorescence counterparts, such as larger Stokes shifts and longer lifetimes. Unfortunately, almost all RTP sensors are operated on quenching-based mechanisms given the sensitive nature of the emissive triplet state. Here we report a type of thioether RTP molecules that shows RTP “turn-on” when volatile acid vapors such as HCl are in contact. To elucidate the underlying mechanism, model thioethers containing different donor/acceptor combinations are investigated via fluorescence spectroscopy and theoretical calculations aided by molecular coordinates obtained from single-crystal X-ray diffraction. It is revealed that a charge-transfer character in the phosphorescence state is crucial. The “turn-on” design concept may significantly broaden the sensing application scope for organic RTP molecules.
Copper-Catalyzed Production of Diaryl Sulfides Using Aryl Iodides and a Disilathiane
Ogiwara, Yohei,Maeda, Hiromu,Sakai, Norio
supporting information, p. 655 - 657 (2017/11/29)
A disilathiane was found to be a novel S1 source for the copper-catalyzed synthesis of diaryl sulfides using aryl iodides. The reaction of iodoarenes and hexamethyldisilathiane, (Me 3 Si) 2 S, in the presence of a catalytic amount of CuI/1,10-phenanthroline provided various types of diaryl sulfides in good yields.
4-(Phenoxy) and 4-(benzyloxy)benzamides as potent and selective inhibitors of mono-ADP-ribosyltransferase PARP10/ARTD10
Murthy, Sudarshan,Desantis, Jenny,Verheugd, Patricia,Maksimainen, Mirko M.,Venkannagari, Harikanth,Massari, Serena,Ashok, Yashwanth,Obaji, Ezeogo,Nkizinkinko, Yves,Lüscher, Bernhard,Tabarrini, Oriana,Lehti?, Lari
, p. 93 - 102 (2018/07/06)
Human Diphtheria toxin-like ADP-ribosyltranferases (ARTD) 10 is an enzyme carrying out mono-ADP-ribosylation of a range of cellular proteins and affecting their activities. It shuttles between cytoplasm and nucleus and influences signaling events in both compartments, such as nuclear factor kappa-light-chain-enhancer of activated B cells (NF-κB) signaling and S phase DNA repair. Furthermore, overexpression of ARTD10 induces cell death. We recently reported on the discovery of a hit compound, OUL35 (compound 1), with 330 nM potency and remarkable selectivity towards ARTD10 over other enzymes in the human protein family. Here we aimed at establishing a structure-activity relationship of the OUL35 scaffold, by evaluating an array of 4-phenoxybenzamide derivatives. By exploring modifications on the linker between the aromatic rings, we identified also a 4-(benzyloxy)benzamide derivative, compound 32, which is potent (IC50 = 230 nM) and selective, and like OUL35 was able to rescue HeLa cells from ARTD10-induced cell death. Evaluation of an enlarged series of derivatives produced detailed knowledge on the structural requirements for ARTD10 inhibition and allowed the discovery of further tool compounds with submicromolar cellular potency that will help in understanding the roles of ARTD10 in biological systems.
Copper-Catalyzed C-S Bond Formation via the Cleavage of C-O Bonds in the Presence of S8 as the Sulfur Source
Rostami, Abed,Rostami, Amin,Ghaderi, Arash,Gholinejad, Mohammad,Gheisarzadeh, Sajedeh
, p. 5025 - 5038 (2017/10/06)
Useful and applicable methods for one-pot and odorless synthesis of unsymmetrical and symmetrical diaryl sulfides via C-O bond activation are presented. First, a new efficient procedure for the synthesis of unsymmetrical sulfides using the cross-coupling reaction of phenolic esters such as acetates, tosylates, and triflates and with arylboronic acid or triphenyltin chloride as the coupling partners is reported. Depending on the reaction, S 8 /KF or S 8 /NaO t -Bu system is found to be an effective source of sulfur in the presence of copper salts and in poly(ethylene glycol) as a green solvent. Then, the synthesis of symmetrical diaryl sulfides from phenolic compounds by using S 8 as the sulfur source and NaO t -Bu in anhydrous DMF at 120 °C under N 2 is described. By these protocols, the synthesis of a variety of unsymmetrical and symmetrical sulfides become easier than the available protocols in which thiols and aryl halides are directly used for the preparation of the sulfides.
Anchoring of Cu(II)–vanillin Schiff base complex on MCM-41: A highly efficient and recyclable catalyst for synthesis of sulfides and 5-substituted 1H–tetrazoles and oxidation of sulfides to sulfoxides
Khanmoradi, Maryam,Nikoorazm, Mohsen,Ghorbani-Choghamarani, Arash
, (2017/09/01)
A copper(II)–vanillin complex was immobilized onto MCM-41 nanostructure and was used as an inexpensive, non-toxic and heterogeneous catalyst in the synthesis of symmetric aryl sulfides by the cross-coupling of aromatic halides with S8 as an effective sulfur source, in the oxidation of sulfides to sulfoxides using 30% H2O2 as a green oxidant and in the synthesis of 5-substituted 1H–tetrazoles from a smooth (3?+?2) cycloaddition of organic nitriles with sodium azide (NaN3). The products were obtained in good to excellent yields. This catalyst could be reused several times without loss of activity. Characterization of the catalyst was performed using Fourier transform infrared, energy-dispersive X-ray and atomic absorption spectroscopies, X-ray diffraction, thermogravimetric analysis, and scanning and transmission electron microscopies.
Ligand-free copper-catalysed direct synthesis of diaryl sulfides and diaryl disulfides in wet poly(ethylene glycol)
Nowrouzi, Najmeh,Abbasi, Mohammad,Latifi, Hadis
, (2017/03/01)
An improved protocol has been developed for the one-pot CuI-catalysed preparation of symmetric diaryl sulfides from their available aryl halides in the presence of thiourea as sulfur transfer agent and in the absence of both ligand and organic solvent. This catalytic system was also used for the high-yielding preparation of diaryl disulfides in the presence of C2Cl6 as oxidant.
