50907-46-5Relevant academic research and scientific papers
Synthesis and characterization of magnetic Fe3O4@Creatinine@Zr nanoparticles as novel catalyst for the synthesis of 5-substituted 1H-tetrazoles in water and the selective oxidation of sulfides with classical and ultrasonic methods
Ghadermazi, Mohammad,Moeini, Nazanin,Molaei, Somayeh
, (2021/12/03)
Tetrazoles and sulfoxide compounds have a wide range of applications in industries and are of great expectation to be environmentally friendly and cost-effective. This paper reports the introduction of zirconium supported on Fe3O4 na
Magnetization of biochar nanoparticles as a novel support for fabrication of organo nickel as a selective, reusable and magnetic nanocatalyst in organic reactions
Moradi, Parisa,Hajjami, Maryam
, p. 2981 - 2994 (2021/02/26)
Catalyst species are an important class of materials in chemistry, industry, medicine and biotechnology. Also, waste recycling is an important process in green chemistry and economic efficiency. Therefore, in order to recycle waste, biochar nanoparticles were prepared from chicken manure. Then, the biochar nanoparticles were magnetized under a green and environmentally friendly method. Finally, the surface of the magnetic biochar nanoparticles was modified and further they were applied as a novel support for fabrication of nickel as a homoselective and reusable catalyst in organic reactions. The structure of this organic-inorganic catalyst has been characterized by N2adsorption-desorption isotherms, and the SEM, EDS, WDX, XRD, TGA, AAS, FT-IR and VSM techniques. This magnetically recyclable catalyst was used in the homoselective synthesis of tetrazole and pyranopyrazole derivatives. This catalyst can be reused several times without significant loss of its catalytic efficiency. The heterogeneity and stability of this nanocatalyst were studied by hot filtration and the AAS technique. Also, the reused catalyst was characterized by the SEM, EDS, AAS and BET techniques.
Synthesis and Characterization of Magnetic Functionalized Ni and Cu Nano Catalysts and Their Application in Oxidation, Oxidative Coupling and Various Multi-Component Reactions
Hajjami, Maryam,Sheikhaei, Shiva,Gholamian, Fatemeh,Yousofvand, Zakieh
, p. 2420 - 2435 (2021/01/04)
Abstract: Two magnetic nano catalysts of nickel and copper, Fe3O4@SiO2@DOP-BenPyr-M(II), (M=Ni and Cu) have been synthesized. These catalysts were applied as recoverable, efficient and new heterogeneous catalysts for the high yielding and room temperature one-pot procedure of selective oxidation of sulfides to sulfoxides and oxidative coupling of thiols to disulfides. In addition, the catalytic activity of Fe3O4@SiO2@DOP-BenPyr-Ni(II) was investigated as heterogeneous nanocatalyst for synthesis of 2,3-dihydroquinazolin-4(1H)-ones, 5-substituted 1H-tetrazoles and polyhydroquinolines. The synthesized catalysts were characterized by FT-IR, TGA, XRD, VSM, EDX, ICP and SEM techniques. These catalysts were recovered by an external magnet and reused several times without significant loss of catalytic efficiency. Graphic Abstract: [Figure not available: see fulltext.]
Fe3O4@L-lysine-Pd(0) organic–inorganic hybrid: As a novel heterogeneous magnetic nanocatalyst for chemo and homoselective [2 + 3] cycloaddition synthesis of 5-substituted 1H-tetrazoles
Ashraf, Muhammad Aqeel,Liu, Zhenling,Li, Cheng,Zhang, Dangquan
, (2020/12/23)
An efficient and sustainable synthetic protocol has been presented to synthesis and 5-substituted 1H-tetrazole privileged heterocyclic substructures. The synthetic protocol involves two-component reaction between aryl nitriles and NaN3 in water using complex of L-lysine-palladium nanoparticles (NPs) modified Fe3O4 nanoparticles as magnetically separable, recyclable, and reusable heterogeneous catalyst. Magnetically retrievable L-lysine-Pd(0) modified Fe3O4 nanoparticles were applied in [2 + 3] cycloaddition synthesis of 5-substituted 1H-tetrazoles. The advantages of this strategy include easy recovery and efficient reusability of the expensive Pd NPs, obtaining high yields of [2 + 3] cycloaddition, short reaction times, and all of the reported synthetic strategies are being performed in water as green solvent for a wide range of substrates.
Coupling ofN-tosylhydrazones with tetrazoles: synthesis of 2-β-d-glycopyranosylmethyl-5-substituted-2H-tetrazole type glycomimetics
Kaszás, Tímea,Cservenyák, Ivett,Juhász-Tóth, éva,Kulcsár, Andrea E.,Granatino, Paola,Nilsson, Ulf J.,Somsák, László,Tóth, Marietta
supporting information, p. 605 - 618 (2021/02/06)
Coupling reactions ofO-peracylated 2,6-anhydro-aldose tosylhydrazones (C-(β-d-glycopyranosyl)formaldehyde tosylhydrazones) with tetrazoles were studied under metal-free conditions using thermic or microwave activation in the presence of different bases. The reactions proved highly regioselective and gave the corresponding, up-to-now unknown 2-β-d-glycopyranosylmethyl-2H-tetrazoles in 7-67% yields. The method can be applied to get new types of disaccharide mimetics, 5-glycosyl-2-glycopyranosylmethyl-2H-tetrazoles, as well. Galectin binding studies withC-(β-d-galactopyranosyl)formaldehyde tosylhydrazone and 2-(β-d-galactopyranosylmethyl)-5-phenyl-2H-tetrazole revealed no significant inhibition of any of these lectins.
Magnetic nitrogen-doped carbon derived from silk cocoon biomass: a promising and sustainable support for copper
Akbarzadeh, Parisa,Koukabi, Nadiya,Tahmasbi, Marzieh
, (2021/12/01)
In this study, a magnetic nitrogen-doped carbon-based copper (MNC-Cu) catalyst was fabricated so that natural silk cocoons undergo thermal processes and then activate by combining with Fe3O4 MNPs as a suitable substrate for placement copper metal. The efficiency of the generated catalyst in the synthesis of 5-substituted 1H-tetrazole derivatives was evaluated by the [3 + 2] cycloaddition reaction of aromatic aldehydes, azide ions, and hydroxylamines. FT-IR, FE-SEM, EDS, TEM, XRD, TGA, and VSM techniques have been adopted to identify and validate this heterogeneous catalyst. The observation from EDS, elemental mapping, XRD, and FT-IR analysis confirms the immobilization of Cu metals on the MNC surface and uniform distribution of species and then no aggregation occurs during functionalization. VSM results show the magnetic feature of fabricated catalyst, and based on the leaching test, the amount of catalyst leaching was negligible. Moreover, this reaction is a one-pot multicomponent reaction (MCRs) or more precisely a one-pot, three-component reaction, which is one of the advantages of this work. The fabricated catalyst shows high efficiency, good stability, and considerable reactivity in synthesizing 5-substituted 1H-tetrazole derivatives. So it can be seen that the fabricated magnetic catalyst is a useful and practical catalyst for synthesizing [3 + 2] cycloaddition reactions. Reusability and recyclability for five sequential runs without notable increase and reduction in activity are other advantages. In addition, the magnetic properties of this heterogeneous catalyst led to easy and quickly recovered and striking copper leaching. Graphical abstract: [Figure not available: see fulltext.]
Fabricated copper catalyst on biochar nanoparticles for the synthesis of tetrazoles as antimicrobial agents
Moradi, Parisa,Hajjami, Maryam,Tahmasbi, Bahman
, (2019/11/05)
Biochar is a carbon-rich solid which its surface was covered by high density of carbonyl, hydroxyl and carboxylic acid functional groups. In this work, biochar nanoparticles were prepared from pyrolysis of chicken manure and further a new copper catalyst
Palladium fabricated on boehmite as an organic-inorganic hybrid nanocatalyst for C-C cross coupling and homoselective cycloaddition reactions
Tahmasbi, Bahman,Ghorbani-Choghamarani, Arash,Moradi, Parisa
, p. 3717 - 3727 (2020/03/17)
Herein, boehmite nanoparticles were prepared using an aqueous solution of NaOH and Al(NO3)3?9H2O at room temperature. After modification of the boehmite nanoparticle (BNP) surface by 3-choloropropyltrimtoxysilane (CPTMS), adenine was anchored on the surface. Finally, a complex of palladium was fabricated on the BNP surface (Pd-adenine@boehmite). The obtained nanoparticles were identified by TGA, FT-IR, BET, EDS, WDX, SEM, XRD and AAS techniques. In continuation, the Pd-adenine@boehmite was employed as an efficient, reusable and organic-inorganic hybrid catalyst in the C-C cross coupling reactions without a phosphine ligand or an inert atmosphere. Moreover, the homoselective synthesis of tetrazoles was studied in the presence of Pd-adenine@boehmite as a heterogeneous and practical nanocatalyst which can be recovered and reused in the described organic reactions. Besides, organic products which were isolated in suitable TOF and TON numbers in the presence of Pd-adenine@boehmite as a catalyst revealed the practicality of this catalyst. The heterogeneous nature of this catalyst was confirmed by TEM, EDS, WDX, AAS, and FT-IR techniques and, then, compared to the fresh catalyst.
Copper and nickel immobilized on cytosine@MCM-41: as highly efficient, reusable and organic–inorganic hybrid nanocatalysts for the homoselective synthesis of tetrazoles and pyranopyrazoles
Nikoorazm, Mohsen,Tahmasbi, Bahman,Gholami, Shahab,Moradi, Parisa
, (2020/07/15)
In this work, a green approach is reported for efficient synthesis of biologically active tetrazole and pyranopyrazole derivatives in the presence of Cu-Cytosine@MCM-41 and Ni-Cytosine@MCM-41 (copper (II) and nickel (II) catalyst on the modified MCM-41 us
Copper-based catalysts derived from salen-type ligands: Synthesis of 5-substituted-1: H-tetrazoles via [3+2] cycloaddition and propargylamines via A3-coupling reactions
Singh, Anshu,Maji, Ankur,Mohanty, Aurobinda,Ghosh, Kaushik
, p. 18399 - 18418 (2020/11/13)
Base-metal copper(ii) complexes derived from unsymmetrical salen-type ligands were designed and synthesized using ligands L1H to L4H in moderate yield. The synthesized unsymmetrical ligands L1H to L4H and the corresponding copper complexes (1-4) were characterized by UV-visible, IR and ESI-MS spectroscopic studies. Molecular structures of complexes 1, 2 and 4 were determined by X-ray crystallography. Copper complexes 1-4 were employed as catalysts for [3+2] cycloaddition and A3-coupling reactions. The mutual approach of salen-type ligands and metals via active participation of ligands allow to achieve the catalytic reactions. Reaction pathways were proposed and possible intermediate species during the catalytic cycle were successfully characterized by ESI-MS spectroscopic studies. This journal is
