Welcome to LookChem.com Sign In|Join Free
  • or
1-methylcyclohexane-1,2-diol is a chemical with a specific purpose. Lookchem provides you with multiple data and supplier information of this chemical.

6296-84-0

Post Buying Request

6296-84-0 Suppliers

Recommended suppliers

  • Product
  • FOB Price
  • Min.Order
  • Supply Ability
  • Supplier
  • Contact Supplier

6296-84-0 Usage

Physical State

Colorless, viscous liquid

Odor

Slightly sweet

Primary Use

Solvent in industrial applications

Applications

Production of coatings, paints, and adhesives

Additional Uses

Stabilizer in pharmaceutical formulations, dispersant in pigment manufacturing

Importance in Organic Synthesis

Acts as a chiral building block

Versatility

Multiple uses in the chemical industry

Check Digit Verification of cas no

The CAS Registry Mumber 6296-84-0 includes 7 digits separated into 3 groups by hyphens. The first part of the number,starting from the left, has 4 digits, 6,2,9 and 6 respectively; the second part has 2 digits, 8 and 4 respectively.
Calculate Digit Verification of CAS Registry Number 6296-84:
(6*6)+(5*2)+(4*9)+(3*6)+(2*8)+(1*4)=120
120 % 10 = 0
So 6296-84-0 is a valid CAS Registry Number.
InChI:InChI=1/C7H14O2/c1-7(9)5-3-2-4-6(7)8/h6,8-9H,2-5H2,1H3

6296-84-0SDS

SAFETY DATA SHEETS

According to Globally Harmonized System of Classification and Labelling of Chemicals (GHS) - Sixth revised edition

Version: 1.0

Creation Date: Aug 12, 2017

Revision Date: Aug 12, 2017

1.Identification

1.1 GHS Product identifier

Product name 1-methylcyclohexane-1,2-diol

1.2 Other means of identification

Product number -
Other names trans-1-methylcyclohexane-1,2-diol

1.3 Recommended use of the chemical and restrictions on use

Identified uses For industry use only.
Uses advised against no data available

1.4 Supplier's details

1.5 Emergency phone number

Emergency phone number -
Service hours Monday to Friday, 9am-5pm (Standard time zone: UTC/GMT +8 hours).

More Details:6296-84-0 SDS

6296-84-0Relevant academic research and scientific papers

Oxidation of alkenes to 1,2-diols: FT-IR and UV studies of silica-supported sulfonic acid catalysts and their interaction with H2O and H 2O2

Maggi, Raimondo,Martra, Gianmario,Piscopo, Calogero Giancarlo,Alberto, Gabriele,Sartori, Giovanni

, p. 19 - 28 (2012)

Supported sulfonic acids can be employed as efficient catalysts in the dihydroxylation of 1-methylcyclohexene with aqueous hydrogen peroxide, without the use of additional solvents, under mild condition. The reaction was deeply studied in terms of catalys

Selective Isomerization via Transient Thermodynamic Control: Dynamic Epimerization of trans to cis Diols

Macmillan, David W. C.,Oswood, Christian J.

supporting information, p. 93 - 98 (2022/01/03)

Traditional approaches to stereoselective synthesis require high levels of enantio- and diastereocontrol in every step that forms a new stereocenter. Here, we report an alternative approach, in which the stereochemistry of organic substrates is selectivel

A Change from Kinetic to Thermodynamic Control Enables trans-Selective Stereochemical Editing of Vicinal Diols

Gu, Xin,Wendlandt, Alison E.,Zhang, Yu-An

supporting information, p. 599 - 605 (2022/01/03)

Here, we report the selective, catalytic isomerization of cis-1,2-diols to trans-diequatorial-1,2-diols. The method employs triphenylsilanethiol (Ph3SiSH) as a catalyst and proceeds under mild conditions in the presence of a photoredox catalyst and under

Straightforward Synthesis of Fluorinated Enals via Photocatalytic α-Perfluoroalkenylation of Aldehydes

Wulkesch, Christian,Czekelius, Constantin

, p. 7425 - 7438 (2021/06/21)

(Per)fluorinated substances represent an important compound class with regard to drug design and material chemistry. We found a mild, operationally simple, and inexpensive photocatalytic perfluoroalkenylation reaction giving tetrasubstituted, highly electron-deficient enals straight from aldehydes. This one-step reaction tolerates various functional groups and can be applied to a wide range of substrates giving the products in yields of 52-84%.

Tandem Lewis acid catalysis for the conversion of alkenes to 1,2-diols in the confined space of bifunctional TiSn-Beta zeolite

Lei, Qifeng,Wang, Chang,Dai, Weili,Wu, Guangjun,Guan, Naijia,Hunger, Michael,Li, Landong

, p. 1176 - 1184 (2021/02/16)

The generation of multifunctional isolated active sites in zeolite supports is an attractive method for integrating multistep sequential reactions into a single-pass tandem catalytic reaction. In this study, bifunctional TiSn-Beta zeolite was prepared by a simple and scalable post-synthesis approach, and it was utilized as an efficient heterogeneous catalyst for the tandem conversion of alkenes to 1,2-diols. The isolated Ti and Sn Lewis acid sites within the TiSn-Beta zeolite can efficiently integrate alkene epoxidation and epoxide hydration in tandem in a zeolite microreactor to achieve one-step conversion of alkenes to 1,2-diols with a high selectivity of >90%. Zeolite confinement effects result in high tandem rates of alkene epoxidation and epoxide hydration as well as high selectivity toward the desired product. Further, the novel method demonstrated herein can be employed to other tandem catalytic reactions for sustainable chemical production.

Photo-Induced Dihydroxylation of Alkenes with Diacetyl, Oxygen, and Water

Masuda, Yusuke,Ikeshita, Daichi,Murakami, Masahiro

, (2021/02/09)

Herein reported is a photo-induced production of vicinal diols from alkenes under mild reaction conditions. The present dihydroxylation method using diacetyl (= butane-2,3-dione), oxygen, and water dispenses with toxic reagents and intractable waste generation.

Selective palladium nanoparticles-catalyzed hydrogenolysis of industrially targeted epoxides in water

Duval, Marion,Deboos, Victor,Hallonet, Agnès,Sagorin, Gilles,Denicourt-Nowicki, Audrey,Roucoux, Alain

, p. 261 - 268 (2021/03/22)

Palladium nanoparticles, with core sizes of ca. 2.5 nm, were easily synthesized by chemical reduction of Na2PdCl4 in the presence of hydroxyethylammonium salts and proved to be efficient for the selective hydrogenolysis of various aromatic, alkylphenyl, aliphatic epoxides in water as green solvent. Capping agents of the metal species were screened to define the most suitable micellar nanoreactors on two target substrates of industrial interest, epoxystyrene and 7,8-epoxy-2-methoxy-2,6-dimethyloctane. In our conditions, the hydrogenolysis of epoxystyrene proved to be pH-dependent, producing either the diol under acidic conditions, or the sweet-smelling 2-phenylethanol in the presence of a base. Promisingly, 7,8-epoxy-2-methoxy-2,6-dimethyloctane was completely and selectively hydrogenated into Florsantol, a sandalwood odorant at a multigram scale (40 g and up to 175g). A general mechanism for the palladium nanoparticles-catalyzed hydrogenolysis of terminal epoxides was proposed according to steric and electronic properties and finely corroborated with deuterium labelling experiments.

Liquid-phase oxidation of olefins with rare hydronium ion salt of dinuclear dioxido-vanadium(V) complexes and comparative catalytic studies with analogous copper complexes

Maurya, Abhishek,Haldar, Chanchal

, (2021/02/26)

Homogeneous liquid-phase oxidation of a number of aromatic and aliphatic olefins was examined using dinuclear anionic vanadium dioxido complexes [(VO2)2(salLH)]? (1) and [(VO2)2(NsalLH)]? (2) and dinuclear copper complexes [(CuCl)2(salLH)]? (3) and [(CuCl)2(NsalLH)]? (4) (reaction of carbohydrazide with salicylaldehyde and 4-diethylamino salicylaldehyde afforded Schiff-base ligands [salLH4] and [NsalLH4], respectively). Anionic vanadium and copper complexes 1, 2, 3, and 4 were isolated in the form of their hydronium ion salt, which is rare. The molecular structure of the hydronium ion salt of anionic dinuclear vanadium dioxido complex [(VO2)2(salLH)]? (1) was established through single-crystal X-ray analysis. The chemical and structural properties were studied using Fourier transform infrared (FT-IR), ultraviolet–visible (UV–Vis), 1H and 13C nuclear magnetic resonance (NMR), electrospray ionization mass spectrometry (ESI-MS), electron paramagnetic resonance (EPR) spectroscopy, and thermogravimetric analysis (TGA). In the presence of hydrogen peroxide, both dinuclear vanadium dioxido complexes were applied for the oxidation of a series of aromatic and aliphatic alkenes. High catalytic activity and efficiency were achieved using catalysts 1 and 2 in the oxidation of olefins. Alkenes with electron-donating groups make the oxidation processes easy. Thus, in general, aromatic olefins show better substrate conversion in comparison to the aliphatic olefins. Under optimized reaction conditions, both copper catalysts 3 and 4 fail to compete with the activity shown by their vanadium counterparts. Irrespective of olefins, metal (vanadium or copper) complexes of the ligand [salLH4] (I) show better substrate conversion(%) compared with the metal complexes of the ligand [NsalLH4] (II).

The promotional effect of surface Ru decoration on the catalytic performance of Co-based nanocatalysts for guaiacol hydrodeoxygenation

Fan, Guoli,Li, Feng,Shi, Yisheng,Xu, Qiangqiang,Yang, Lan

, (2020/10/02)

In the present work, carbon-supported Ru-decorated Co-based nanocatalysts were fabricated via a layered double hydroxide/carbon composite precursor approach and applied to the efficient hydrodeoxygenation (HDO) of guaiacol to produce cyclohexanol. It was demonstrated that uniform and highly dispersed Co nanoparticles could be formed on the carbon matrix, and the decoration of a small amount of Ru on the surface of Co nanoparticles could introduce stronger hydrogenolysis active sites. Furthermore, the reduction temperature for catalyst precursors could tune the size of Co-containing nanoparticles and regulate the density of surface oxygen vacancies originating from CoOx species. Under the mild reaction conditions (200 ℃ and 1.0 MPa hydrogen pressure), as-fabricated Ru-Co/C catalyst obtained at the reduction temperature of 600 °C showed excellent catalytic activity in the HDO of guaiacol, with a high cyclohexanol yield of ~94 %, which was attributable to surface exposure of highly dispersive Ru° sites and the formation of abundant defective oxygen vacancies. The present results provide a new approach for designing high-performance Co-based HDO nanocatalysts by both the surface decoration of small amounts of precious metals and the introduction of surface defective structures.

Synthesis method of cyclohexanol derivative 1-methyl-1, 2-cyclohexanediol

-

Paragraph 0033; 0048-0051; 0053-0070, (2020/06/30)

The invention relates to a cyclohexanol derivative 1-methyl-1, 2-cyclohexanediol synthesis method, which comprises: mixing guaiacol and an organic solvent, adding the obtained mixture and a Ni/C catalyst to a reaction kettle, introducing hydrogen gas with a pressure of 1-3 MPa, stirring, and carrying out a heating reaction for 1-3 h at a temperature of 180-260 DEG C; wherein the Ni/C catalyst is anickel-loaded green catalyst taking biomass tar as a carrier. According to the method, synthesis of 1-methyl-1, 2-cyclohexanediol can be achieved in one step, the atom utilization rate reaches 100%,the method has very high conversion rate and selectivity, and the green and energy-saving aims are achieved.

Post a RFQ

Enter 15 to 2000 letters.Word count: 0 letters

Attach files(File Format: Jpeg, Jpg, Gif, Png, PDF, PPT, Zip, Rar,Word or Excel Maximum File Size: 3MB)

1 Customer Service

What can I do for you?
Get Best Price

Get Best Price for 6296-84-0