83374-59-8Relevant articles and documents
Cellulose type chiral stationary phase based on reduced graphene oxide@silica gel for the enantiomer separation of chiral compounds
Li, Yuanyuan,Li, Qiang,Zhu, Nan,Gao, Zhuxian,Ma, Yulong
, p. 996 - 1004 (2018/07/29)
The graphene oxide (GO) was covalently coupled to the surfaces of silica gel (SiO2) microspheres by amide bond to get the graphene oxide@silica gel (GO@SiO2). Then, the GO@SiO2 was reduced with hydrazine to the reduced graphene oxide@silica gel (rGO@SiO2), and the cellulose derivatives were physically coated on the surfaces of rGO@SiO2 to prepare a chiral stationary phase (CSP) for high performance liquid chromatography. Under the optimum experimental conditions, eight benzene-enriched enantiomers were separated completely, and the resolution of trans-stilbene oxide perfectly reached 4.83. Compared with the blank column of non-bonded rGO, the separation performance is better on the new CSP, which is due to the existence of rGO to produce special retention interaction with analytes, such as π-π stacking, hydrophobic effect, π-π electron-donor–acceptor interaction, and hydrogen bonding. Therefore, the obtained CSP shows special selectivity for benzene-enriched enantiomers, improves separation selectivity and efficiency, and rGO plays a synergistic effect with cellulose derivatives on enantioseparation.
Chiral separation of four stereoisomers of ketoconazole drugs using capillary electrophoresis
Ibrahim, Wan Aini Wan,Arsad, Siti Rosilah,Maarof, Hasmerya,Sanagi, Mohd Marsin,Aboul-Enein, Hassan Y.
, p. 223 - 227 (2015/03/18)
This work aimed to develop a chiral separation method of ketoconazole enantiomers using electrokinetic chromatography. The separation was achieved using heptakis (2, 3, 6- tri-O-methyl)-β-cyclodextrin (TMβCD), a commonly used chiral selector (CS), as it is relatively inexpensive and has a low UV absorbance in addition to an anionic surfactant, sodium dodecyl sulfate (SDS). The influence of TMβCD concentration, phosphate buffer concentration, SDS concentration, buffer pH, and applied voltage were investigated. The optimum conditions for chiral separation of ketoconazole was achieved using 10mM phosphate buffer at pH2.5 containing 20mM TMβCD, 5mM SDS, and 1.0% (v/v) methanol with an applied voltage of 25 kV at 25 °C with a 5-s injection time (hydrodynamic injection). The four ketoconazole stereoisomers were successfully resolved for the first time within 17 min (total analysis time was 28 min including capillary conditioning). The migration time precision of this method was examined to give repeatability and reproducibility with RSDs ≤5.80% (n =3) and RSDs ≤8.88% (n =9), respectively.
Stereoisomers of ketoconazole: Preparation and biological activity
Rotstein,Kertesz,Walker,Swinney
, p. 2818 - 2825 (2007/10/02)
The four stereoisomers of the antifungal agent ketoconazole (1) were prepared and evaluated for their selectivity in inhibiting a number of cytochrome P-450 enzymes. Large differences in selectivity among the isomers were observed for inhibition of the cytochromes P-450 involved in steroid biosynthesis, whereas little differences was observed for inhibition of those associated with hepatic drug metabolism. The cis-(2S,4R) isomer 2 was the most effective against rat lanosterol 14α-demethylase, (2S,4R)-2 > (2R,4S)-4 >> (2R,4R)-3 = (2S,4S)-5, and progesterone 17α,20-lyase, (2S,4R)-2 >> (2S,4S)-5 > (2R,4R)-3 = (2R,4S)-4, whereas the cis-(2R,4S) isomer 4 was more effective against cholesterol 7α-hydroxylase, (2R,4S)-4 > (2S,4S)-5 > (2R,4R)-3 > (2S,4R)-2, and the trans-(2S,4S) isomer 5 was the most effective against aromatase, (2S,4R)-5 >> (2R,4R)-3 = (2R,4S)-4 > (2S,4R)-2. The cis- (2S,4R) and trans-(2R,4R) isomers 2 and 3 are equipotent in inhibiting corticoid 11β-hydroxylase and much more effective than their antipodes. Little selectivity was observed for inhibition of cholesterol side chain cleavage or xenobiotic hydroxylases. These data indicate that the affinity of azoles for cytochrome P-450 enzymes involved in steroid synthesis is highly dependent on the stereochemistry of the entire molecule, whereas binding to drug metabolizing enzymes is a less selective process.