98288-14-3Relevant academic research and scientific papers
Reduction of Electron-Deficient Alkenes Enabled by a Photoinduced Hydrogen Atom Transfer
Larionova, Natalia A.,Ondozabal, Jun Miyatake,Cambeiro, Xacobe C.
supporting information, p. 558 - 564 (2020/12/07)
Direct hydrogen atom transfer from a photoredox-generated Hantzsch ester radical cation to electron-deficient alkenes has enabled the development of an efficient formal hydrogenation under mild, operationally simple conditions. The HAT-driven mechanism is supported by experimental and computational studies. The reaction is applied to a variety of cinnamate derivatives and related structures, irrespective of the presence of electron-donating or electron-withdrawing substituents in the aromatic ring and with good functional group compatibility. (Figure presented.).
A Photocatalytic Regioselective Direct Hydroaminoalkylation of Aryl-Substituted Alkenes with Amines
Larionova, Natalia A.,Ondozabal, Jun Miyatake,Smith, Emily G.,Cambeiro, Xacobe C.
supporting information, p. 5383 - 5388 (2021/07/26)
A photocatalytic method for the α-selective hydroaminoalkylation of cinnamate esters has been developed. The reaction involves the regioselective addition of α-aminoalkyl radicals generated from aniline derivatives or aliphatic amines to the α-position of unsaturated esters. The scope of aromatic alkenes was extended to styrenes undergoing hydroaminoalkylation with anti-Markovnikov selectivity, which confirms the importance of the aromatic group at the β-position. Simple scale-up is demonstrated under continuous flow conditions, highlighting the practicality of the method.
Phosphetane oxides as redox cycling catalysts in the catalytic wittig reaction at room temperature
Longwitz, Lars,Spannenberg, Anke,Werner, Thomas
, p. 9237 - 9244 (2019/10/08)
Recently, phosphorus redox cycling has gained significant importance for a number of transformations originally requiring the use of stoichiometric amounts of phosphorus reagents. While these methodologies have several benefits, high catalyst loadings (≥10 mol percent) and harsh reaction conditions (T ≥ 100 °C) often limit their versatility and applicability. Herein, we report differently substituted phosphetane oxides as efficient catalysts for the catalytic Wittig reaction. The phosphetane scaffold is easy to modify, and a number of catalysts can be obtained in a simple two-step synthesis. The activity in the Wittig reaction significantly surpasses previously reported phospholane-based catalysts and the reaction can be conducted with catalyst loadings as low as 1.0 mol percent even at room temperature. Furthermore, a Br?nsted acid additive is no longer required to achieve high yields at these mild conditions. A methyl-substituted phosphetane oxide was employed to synthesize 25 different alkenes with yields of up to 97percent. The methodology has a good functional group tolerance and the reaction can be performed starting with alkyl chlorides, bromides, or iodides. Additionally, it was possible to use poly(methylhydrosiloxane) as the terminal reductant in the catalytic Wittig reaction employing 2-MeTHF as a renewable solvent. The intermediates of the Wittig reaction were analyzed by 31P NMR spectroscopy, and in situ NMR experiments confirmed phosphane oxide as the resting state of the catalyst. Further kinetic investigations revealed a striking influence of the base on the rate of phosphane oxide reduction.
Bis(imidazolium) chloride based on 1,2-phenylenediamine as efficient ligand precursor for palladium-catalyzed Mizoroki-Heck cross-coupling reaction
Takallou, Ahmad,Habibi, Azizollah,Halimehjani, Azim Ziyaei,Balalaie, Saeed
supporting information, p. 24 - 28 (2019/03/21)
Bis(imidazolium) chlorides based on 1,2-phenylenediamine were introduced as efficient ligand precursors in the Pd-catalyzed Mizoroki-Heck cross-coupling reactions of substituted aryl halides with activated alkenes to afford the corresponding functionalized alkenes. While high to excellent yields (78–96%) were obtained with aryl bromides, moderate yields (51–59%) were achieved for aryl chlorides in this protocol.
Enantioselective Copper-Catalyzed 1,5-Cyanotrifluoromethylation of Vinylcyclopropanes
Zhang, Zi-Qi,Meng, Xiang-Yu,Sheng, Jie,Lan, Quan,Wang, Xi-Sheng
supporting information, p. 8256 - 8260 (2019/10/16)
A copper-catalyzed enantioselective 1,5-cyanotrifluoromethylation of vinylcyclopropanes has been developed using a radical relay strategy. This asymmetric reaction has demonstrated high enantioselective control, broad substrate scope, and mild conditions. Initiated by the in situ generated CF3 radical from Togni's reagent, this method offers a new solution for remote enantioselective bifunctionalization of alkenes and thus provides a straightforward way for the synthesis of chiral CF3-containing internal alkenylnitriles.
Synthesis of olefins via a Wittig reaction mediated by triphenylarsine
Li, Lun,Stimac, Jared C.,Geary, Laina M.
supporting information, p. 1379 - 1381 (2017/03/17)
An arsine-mediated Wittig reaction for the synthesis of olefins is described. After heating triphenylarsine in the presence of an activated alkyl bromide for 30?min, the resulting arsonium salt condensed with aldehydes in as little as 5?min at room temperature, yielding the olefins in high yields. Aromatic, heteroaromatic, and alkyl aldehydes were all suitable substrates for this process.
General and Efficient Intermolecular [2+2] Photodimerization of Chalcones and Cinnamic Acid Derivatives in Solution through Visible-Light Catalysis
Lei, Tao,Zhou, Chao,Huang, Mao-Yong,Zhao, Lei-Min,Yang, Bing,Ye, Chen,Xiao, Hongyan,Meng, Qing-Yuan,Ramamurthy, Vaidhyanathan,Tung, Chen-Ho,Wu, Li-Zhu
, p. 15407 - 15410 (2017/11/13)
[2+2] Photocycloaddition, for example, the dimerization of chalcones and cinnamic acid derivatives, is a unique strategy to construct cyclobutanes, which are building blocks for a variety of biologically active molecules and natural products. However, most attempts at the above [2+2] addition have focused on solid-state, molten-state, or host–guest systems under ultraviolet-light irradiation in order to overcome the competition of facile geometric isomerization of nonrigid olefins. We report a general and simple method to realize the intermolecular [2+2] dimerization reaction of these acyclic olefins to construct cyclobutanes in a highly regio- and diastereoselective manner in solution under visible light, which provides an efficient solution to a long-standing problem.
Oxidative coupling of Michael acceptors with aryl nucleophiles produced through rhodium-catalyzed C-C bond activation
Gregerson, Caroline E.,Trentadue, Kathryn N.,Phipps, Erik J. T.,Kirsch, Janelle K.,Reed, Katherine M.,Dyke, Gabriella D.,Jansen, Jacob H.,Otteman, Christian B.,Stachowski, Jessica L.,Johnson, Jeffrey B.
, p. 5944 - 5948 (2017/07/25)
Utilizing rhodium catalysis, aryl nucleophiles generated via carbon-carbon single bond activation successfully undergo oxidative coupling with Michael acceptors. The reaction scope encompasses a broad range of nucleophiles generated from quinolinyl ketones as well as a series of electron deficient terminal alkenes, illustrating the broad potential of intersecting carbon-carbon bond activation with synthetically useful coupling methodologies. The demonstrated oxidative coupling produces a range of cinnamyl derivatives, several of which are challenging to prepare via conventional routes.
Using non-covalent interactions to direct regioselective 2+2 photocycloaddition within a macrocyclic cavitand
Nguyen, Nga,Clements, Aspen Rae,Pattabiraman, Mahesh
, p. 2433 - 2443 (2016/03/19)
The relative orientation of guests within ternary inclusion complexes is governed by the host-guest and guest-guest supramolecular interactions. Selectivity in 2+2 photocycloaddition between two alkenes included within a macrocyclic cavitand (γ-cyclodextrin) can be controlled using non-covalent interactions. In this manuscript, we report cavitand-mediated control of regioselectivity between alkyl cinnamates using non-covalent interactions. Using this method, we have shown that regioselectivity can be switched completely from a head-to-head dimer to a head-to-tail dimer. The reactions were also stereoselective in most cases. Stoichiometry experiments were performed to explore relative stabilities of the complexes, which indicate that the ternary complex is more stable than others. Selectivity in the photocycloaddition reaction was also applied retrospectively to deduce intermolecular orientations. Time-dependent conversion study we performed indicates that the observed reactivity of alkenes is representative of the intermolecular orientations in the bulk of the complex medium. Experimental observations and computational studies were used to qualitatively understand the complex structures, and relative magnitudes of the weak interactions. The reactions of complexes were studied in slurry form, and the extent of reaction control suggests a solid-state-like behavior.
Scope and Limitation of the Microwave-Assisted Catalytic Wittig Reaction
Hoffmann, Marcel,Deshmukh, Sunetra,Werner, Thomas
, p. 4532 - 4543 (2015/07/27)
We have developed a microwave-assisted catalytic Wittig reaction. In this paper, we give full account of the scope and limitations of this reaction. A screening of various commercially available phosphine oxides as precatalysts revealed Bu3P=O to be the most promising candidate. We tested 10 silanes for the in situ reduction of the phosphine oxide to generate Bu3P as the actual catalyst. Different epoxides were tested as masked bases. In this context, cyclohexene oxide as well as butylene oxide proved to be suitable. The reaction could be carried out at 125 C, but higher yields and E/Z selectivities were obtained at 150 °C. Under the optimised reaction conditions, more than 40 examples for the conversion of various aldehydes into the corresponding alkenes are reported. The products were obtained in yields of up to 88 with high E selectivities. Moreover, we also describe the further screening of several chiral phosphines as catalysts for the microwave-assisted enantioselective catalytic Wittig reaction. The scope and limitations of the microwave-assisted catalytic Wittig reaction have been evaluated with respect to the catalyst, silane, solvent, reaction conditions, and substrates.
