1877-77-6Relevant articles and documents
Control of chemoselectivity in hydrogenations of substituted nitro- and cyano-aromatics by cluster-derived ruthenium nanocatalysts
Indra, Arindam,Maity, Niladri,Maity, Prasenjit,Bhaduri, Sumit,Lahiri, Goutam Kumar
, p. 176 - 183 (2011)
Catalyst precursors 1 and 2, made by ion-pairing [H3Ru 4(CO)12]- with NR4+ groups of functionalized MCM-41 and water-soluble poly(diallyldimethylammonium chloride), PDADMAC, respectively, have been evaluated for the chemoselective hydrogenation of nitro- and cyano-benzaldehydes. They are found to be inert toward -NO2 and -CN groups, but active for the reduction of -CHO and >C=C4 (3) or with (5%)Ru-Al2O3, where both the functional groups are hydrogenated. Kinetic analyses have been carried out for the hydrogenation of 4-nitrobenzaldehyde with 2. Existence of an induction time and two competitive equilibriums followed by the product-forming rate-determining step are inferred from the empirically derived rate expression. The kinetic results, structural evidences, and previous work strongly suggest that the observed chemoselectivity is probably a result of the absence of multiple crystal planes, differing in Miller indices, in the cluster-derived catalysts.
Yeast supported gold nanoparticles: an efficient catalyst for the synthesis of commercially important aryl amines
Krishnan, Saravanan,Patel, Paresh N.,Balasubramanian, Kalpattu K.,Chadha, Anju
supporting information, p. 1915 - 1923 (2021/02/06)
Candida parapsilosisATCC 7330 supported gold nanoparticles (CpGNP), prepared by a simple and green method can selectively reduce nitroarenes and substituted nitroarenes with different functional groups like halides (-F, -Cl, -Br), olefins, esters and nitriles using sodium borohydride. The product aryl amines which are useful for the preparation of pharmaceuticals, polymers and agrochemicals were obtained in good yields (up to >95%) using CpGNP catalyst under mild conditions. The catalyst showed high recyclability (≥10 cycles) and is a robust free flowing powder, stored and used after eight months without any loss in catalytic activity.
Crosslinked polymer encapsulated palladium nanoparticles for catalytic reduction and Suzuki reactions in aqueous medium
Begum, Robina,Farooqi, Zahoor H.,Xiao, Jianliang,Ahmed, Ejaz,Sharif, Ahsan,Irfan, Ahmad
, (2021/07/06)
Acrylamide and N-isopropylacrylamide were copolymerized in the presence of a N,N-methylenebisacrylamide crosslinker to obtain poly(N-isopropylacrylamide-co-acrylamide) [P(NA)] polymer colloidal particles. Pd nano crystals with diameter of 4–8 nm were loaded into the [P(NA)] microgels by reduction of [PdCl4]-2 within dispersion of polymer microgels. The Pd NPs-loaded hybrid microgels were analysed by TEM, STEM, EDX and XRD. The catalytic ability of the Pd-[P(NA)] system was investigated towards reductive transformation of nitroarenes into corresponding aryl amines and Suzuki coupling transformation in a green solvent, H2O. The progress of catalytic reaction was examined by thin layer chromatography (TLC). Different reactants were effectively converted into their corresponding products with great to fabulous yields (extending from 75 to 97%) under gentle reaction conditions. The Pd-[P(NA)] catalyst is stable for long time and can be utilized numerous times without any notable loss in its catalytic action.
Chemoselective reduction of nitroarenes, N-acetylation of arylamines, and one-pot reductive acetylation of nitroarenes using carbon-supported palladium catalytic system in water
Zeynizadeh, Behzad,Mohammad Aminzadeh, Farkhondeh,Mousavi, Hossein
, p. 3289 - 3312 (2021/05/11)
Developing and/or modifying fundamental chemical reactions using chemical industry-favorite heterogeneous recoverable catalytic systems in the water solvent is very important. In this paper, we developed convenient, green, and efficient approaches for the chemoselective reduction of nitroarenes, N-acetylation of arylamines, and one-pot reductive acetylation of nitroarenes in the presence of the recoverable heterogeneous carbon-supported palladium (Pd/C) catalytic system in water. The utilize of the simple, effective, and recoverable catalyst and also using of water as an entirely green solvent along with relatively short reaction times and good-to-excellent yields of the desired products are some of the noticeable features of the presented synthetic protocols. Graphic abstract: [Figure not available: see fulltext.].
Fabrication of palladium nanocatalyst supported on magnetic eggshell and its catalytic character in the catalytic reduction of nitroarenes in water
?al??kan, Melike,Akay, Sema,Baran, Talat,Kayan, Berkant
, (2021/07/21)
Aromatic nitro compounds, which have good solubility in water, are highly toxic and non-biodegradable are one of the most important industrial pollutants and have negative effects on human health, aquatic life and the environment. Therefore, the elimination of these harmful organic compounds has become an issue of great importance. For this, in this study we have developed a palladium nanocatalyst supported on Fe3O4-coated eggshell and characterized by FT-IR, XRD, XPS, FE-SEM, TG/DTG, BET, TEM and EDS techniques (Pd-Fe3O4-ES). Also, the quantitative analysis of Pd was determined using ICP-OES. The catalytic behavior of the designed Pd-Fe3O4-ES nanocatalyst was investigated against the catalytic reduction of several highly toxic nitro compounds using NaBH4 in water at room temperature. The progress of the reduction was followed using high performance liquid chromatography (HPLC). The catalytic studies revealed that the nitro compounds were converted into the desired amines by the Pd-Fe3O4-ES nanocatalyst using a very low dose of catalyst (15 mg) and short-duration reactions (81–360 s) in aqueous medium at ambient temperature. Furthermore, the Pd-Fe3O4-ES nanocatalyst showed good catalytic stability by retaining its activity after the fifth catalytic run.
Copper nanoparticles (CuNPs) catalyzed chemoselective reduction of nitroarenes in aqueous medium
Chand, Dillip Kumar,Rai, Randhir
, (2021/08/20)
Abstract: A procedure for practical synthesis of CuNPs from CuSO4·5H2O is established, under appropriate reaction conditions, using rice (Oryza sativa) as an economic source of reducing as well as a stabilizing agent. Optical and microscopic techniques are employed for the characterization of the synthesized CuNPs and the sizes of the particles were found to be in the range of 8 ± 2 nm. The nanoparticles are used as a catalyst for chemoselective reduction of aromatic nitro compounds to corresponding amines under ambient conditions and water as a reaction medium. Graphic abstract: CuNPs are synthesized using hydrolysed rice and used as catalyst for chemoselective reduction of nitroarenes to their corresponding amines in water. [Figure not available: see fulltext.]
Synthesis, characterization, and catalytic activity of half-sandwich ruthenium complexes with pyridine/phenylene bridged NHC = E (NHC = N-heterocyclic carbene, E = S, Se) ligands
Jia, Wei-Guo,Du, Teng-Teng,Gao, Li-Li,Du, Jun
, (2020/05/16)
Three half-sandwichruthenium(II) complexes with pyridine/phenylene bridged NHC = E (NHC = N-heterocyclic carbene, E = S, Se) ligands [Ru(p-cymene)L](PF6)1–2 (1a–1c, L = ligand) were synthesized and characterized. All ruthenium complexes were fully characterized by 1H and 13C NMR spectra, mass spectrometry, and single-crystalX-ray diffraction methods. Moreover, the half-sandwich ruthenium complexes with NHC = E ligands showed highly catalytic activities towards to the tandem dehydrogenation of ammonia borane (AB) and hydrogenation of R–NO2 to R–NH2 at 353 K in water.
Generation and characterization of palladium nanocatalyst anchored on a novel polyazomethine support: Application in highly efficient and quick catalytic reduction of environmental contaminant nitroarenes
Y?lmaz Baran, Nuray
, (2020/06/26)
Removal of toxic nitroarenes, which threaten all living organisms and environment, from wastewaters has been an important and prior issue. Therefore, the focus of the present study was to fabricate an effective, fast, reusable, and easily recoverable heterogeneous Pd nanoparticles (Pd NPs) supported on a novel polyazomethine having phenol group (Pd NPs? P(3-M-4-PAP)) for removal of several hazardous nitroarenes by catalytic reduction from water. Firstly, a novel polyazomethine featuring phenol group was prepared as a stabilizer and then, Pd NPs were anchored on it. Characterizations of the materials were performed by XRD, UV–Vis, FTIR, 1H-NMR, TGA, FE-SEM, EDS and TEM techniques. The obtained TEM analysis results showed that the size of Pd NPs was about 50 nm. Then, catalytic ability of Pd NPs?P(3-M-4-PAP) was investigated in reduction of harmful nitroarenes to useful aniline derivatives in water. Catalytic tests revealed that Pd NPs?P(3-M-4-PAP) had outstanding catalytic efficiency against reduction of different nitroarenes by giving excellent yields (up to 98%), in very short time (between 22s and 70s) with 2 mg nanocatalyst. Moreover, performed reusability test results demonstrated that the Pd NPs?P(3-M-4-PAP) could be recurrently reusable and easily recoverable.
Immobilization of Au nanoparticles on poly(glycidyl methacrylate)-functionalized magnetic nanoparticles for enhanced catalytic application in the reduction of nitroarenes and Suzuki reaction
Pourjavadi, Ali,Kohestanian, Mohammad,Keshavarzi, Nahid
, (2020/08/10)
We report a novel strategy for the synthesis of magnetic nanocomposite for highly efficient catalysis. Poly(glycidyl methacrylate) (PGMA) chains were grafted to the surface of magnetic nanoparticles (MNPs) through surface-initiated reversible addition-fragmentation chain transfer polymerization. Then, the oxirane rings in the PGMA chains were opened with 2,6-diamino pyridine (DAP) molecules as ligands to prepare the solid support. Finally, this magnetic nanocomposite was used for the immobilization of gold nanoparticles. Fourier-transform infrared spectroscopy, X-ray diffraction, thermogravimetric analysis, transmission electron microscopy, scanning electron microscopy, gel permeation chromatography, vibrating sample magnetometry, and atomic absorption spectroscopy were used for characterization of the catalyst. The loading of gold nanoparticles on the solid support was 0.52 mmol/g. The catalytic activity of the prepared catalyst (MNP@PGMA@DAP@Au) was evaluated for the reduction of nitro compounds and C–C coupling reaction in water. The catalyst can be easily recovered and reused seven times without significant loss of catalytic activity.
The immobilized Cu nanoparticles on magnetic montmorillonite (MMT?Fe3O4?Cu): As an efficient and reusable nanocatalyst for reduction and reductive-acetylation of nitroarenes with NaBH4
Zeynizadeh, Behzad,Rahmani, Soleiman,Tizhoush, Hengameh
, (2019/11/28)
In this study, the immobilization of copper nanoparticles on superparamagnetic montmorillonite, MMT?Fe3O4?Cu, was studied. Magnetically nanoparticles (MNPs) of iron oxide (Fe3O4) were primarily prepared by a chemical co-precipitation method. Next, the prepared Fe3O4 MNPs were intercalated within the interlamellar spaces and external surface of sodium-exchanged montmorillonite. Finally, Cu NPs were immobilized on magnetic montmorillonite by a simply mixing of an aqueous solution of CuCl2·2H2O with MMT?Fe3O4 followed by the reduction with NaBH4. Characterization of MMT?Fe3O4 clay system represented that through the immobilization of Fe3O4 MNPs, disordered-layers structure of MMT was easily reorganized to an ordered-layers arrangement. The synthesized composite systems were characterized using FT-IR, SEM, EDX, XRD, VSM, BET and ICP-OES analyses. SEM analysis exhibited that dispersion of Cu NPs, with the size distribution of 15–25 nm, on the surface of magnetic clay was taken place perfectly. BET surface analysis indicated that after the immobilization of Fe3O4 and Cu species, the surface area and total pore volume of MMT?Fe3O4?Cu system was decreased. Next, the Cu-clay nanocomposite system showed a perfect catalytic activity towards reduction of nitroarenes to anilines as well as reductive-acetylation of nitroarenes to acetanilides using NaBH4 and Ac2O in water as a green and economic solvent. The copper magnetic clay catalyst can be easily separated from the reaction mixture by an external magnetic field and reused for six consecutive cycles without the significant loss of its catalytic activity.
