495-48-7Relevant articles and documents
Organocatalyticvs.Ru-based electrochemical hydrogenation of nitrobenzene in competition with the hydrogen evolution reaction
Alemán, José,Creus, Jordi,García-Antón, Jordi,Mas-Ballesté, Rubén,Moya, Alicia,Philippot, Karine,Romero, Nuria,Sala, Xavier,Solans-Monfort, Xavier
, p. 6446 - 6456 (2020)
The electrochemical reduction of organic contaminants allows their removal from water. In this contribution, the electrocatalytic hydrogenation of nitrobenzene is studied using both oxidized carbon fibres and ruthenium nanoparticles supported on unmodified carbon fibres as catalysts. The two systems produce azoxynitrobenzene as the main product, while aniline is only observed in minor quantities. Although PhNO2hydrogenation is the favoured reaction, the hydrogen evolution reaction (HER) competes in both systems under catalytic conditions. H2formation occurs in larger amounts when using the Ru nanoparticle based catalyst. While similar reaction outputs were observed for both catalytic systems, DFT calculations revealed some significant differences related to distinct interactions between the catalytic material and the organic substrates or products, which could pave the way for the design of new catalytic materials.
Domino reaction between nitrosoarenes and ynenones for catalyst-free preparation of indanone-fused tetrahydroisoxazoles
Qiu, Shaotong,Liang, Renxiao,Wang, Yongdong,Zhu, Shifa
, p. 2126 - 2129 (2019)
A catalyst-free domino reaction to synthesize highly functionalized indanone-fused tetrahydroisoxazole from easily accessed nitrosoarene and 1,6-ynenone with good chemo- A nd regioselectivity was disclosed. This unprecedented domino reaction represents a new strategy for multifunctionalization of an internal alkyne with nitrosoarene by formation of two rings and four bonds in a single operation.
Painting anatase (TiO2) nanocrystals on long nanofibers to prepare photocatalysts with large active surface for dye degradation and organic synthesis
Zheng, Zhanfeng,Zhao, Jian,Liu, Hongwei,Liu, Jiangwen,Bo, Arixin,Zhu, Huaiyong
, p. 2382 - 2388 (2013)
Anatase TiO2 nanocrystals were painted on H-titanate nanofibers by using an aqueous solution of titanyl sulfate. The anatase nanocrystals were bonded solidly onto the titanate fibers through formation of coherent interfaces at which the oxygen atoms were shared by the nanocrystals and the fiber. This approach allowed us to create large anatase surfaces on the nanofibers, which are active in photocatalytic reactions. This method was also applied successfully to coat anatase nanocrystals on surfaces of fly ash and layered clay. The painted nanofibers exhibited a much higher catalytic activity for the photocatalytic degradation of sulforhodamineB and the selective oxidation of benzylamine to the corresponding imine (with a product selectivity >99%) under UV irradiation than both the parent H-titanate nanofibers and a commercial TiO2 powder, P25. We found that gold nanoparticles supported on H-titanate nanofibers showed no catalytic activity for the reduction of nitrobenzene to azoxybenzene, whereas the gold nanoparticles supported on the painted nanofibers and P25 could efficiently reduce nitrobenzene to azoxybenzene as the sole product under visible light irradiation. These results were different from those from the reduction on the gold nanoparticles photocatalyst on ZrO2, in which the azoxybenzene was the intermediate and converted to azobenzene quickly. Evidently, the support materials significantly affect the product selectivity of the nitrobenzene reduction. Finally, the new photocatalysts could be easily dispersed into and separated from a liquid because of their fibril morphology, which is an important advantage for practical applications.
-
Dunworth,Nord
, p. 1459,1461 (1952)
-
Modified cellulose with tunable surface hydrophilicity/hydrophobicity as a novel catalyst support for selective reduction of nitrobenzene
Li, Dan-dan,Lu, Guo-ping,Cai, Chun
, (2020)
Cellulose with tailorable hydrophilicity/hydrophobicity were synthesized by grafting F-containing groups and utilized as supports for palladium nanoparticles. The obtained catalysts were applied in the synthesis of N-phenylhydroxylamine from controllable reduction of nitrobenzene. Unexpectedly high conversion and selectivity could be achieved with 25 ppm Pd catalyst at room temperature in water. The precise modification of the catalyst surface is crucial to realize this targeted transformation. Further investigation indicated that modified cellulose with a more hydrophobic surface would favour the adsorption of nitrobenzene over N-phenylhydroxylamine thus prevent full hydrogenation to aniline.
Skeletal Rearrangement in the ZnII-Catalyzed [4+2]-Annulation of Disubstituted N-Hydroxy Allenylamines with Nitrosoarenes to Yield Substituted 1,2-Oxazinan-3-one Derivatives
Sharma, Pankaj,Liu, Rai-Shung
, p. 15881 - 15887 (2016)
This work reports zinc-catalyzed [4+2]-annulation reactions of disubstituted N-hydroxy allenylamines with nitrosoarenes to afford substituted 1,2-oxazinan-3-ones with a skeletal rearrangement. This annulation is applicable to a reasonable scope of allenylamines and nitrosoarenes. Our control experiments indicate that nitrosobenzene can also implement this annulation through a radical annulation path, but with poor efficiency. Zn(OTf)2or AgOTf greatly improves the efficiency of this [4+2]-annulation; the effect of these metal species is discussed in detail.
Effect of the nature of a transition metal dopant in BaTiO3 perovskite on the catalytic reduction of nitrobenzene
Srilakshmi, Chilukoti,Rao, G. Mohan,Saraf, Rohit
, p. 45965 - 45973 (2015)
In the present study, we have synthesized Fe, Co and Ni doped BaTiO3 catalyst by a wet chemical synthesis method using oxalic acid as a chelating agent. The concentration of the metal dopant varies from 0 to 5 mol% in the catalysts. The physical and chemical properties of doped BaTiO3 catalysts were studied using various analytical methods such as X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), BET surface area and Transmission electron microscopy (TEM). The acidic strength of the catalysts was measured using a n-butylamine potentiometric titration method. The bulk BaTiO3 catalyst exhibits a tetragonal phase with the P4mm space group. A structural transition from tetrahedral to cubic phase was observed for Fe, Co and Ni doped BaTiO3 catalysts with an increase in doped metal concentration from 1 to 5 mol%. The particle sizes of the catalysts were calculated from TEM images and are in the range of 30-80 nm. All the catalysts were tested for the catalytic reduction of nitrobenzene to azoxybenzene. The BaTiO3 catalyst was found to be highly active and less selective compared to the doped catalysts which are active and highly selective towards azoxybenzene. The increase in selectivity towards azoxybenzene is due to an increase in acidic strength and reduction ability of the doped metal. It was also observed that the nature of the metal dopant and their content at the B-site has an impact on the catalytic reduction of nitrobenzene. The Co doped BaTiO3 catalyst showed better activity with only 0.5 mol% doping than Fe and Ni doped BaTiO3 catalysts with maximum nitrobenzene conversion of 91% with 78% selectivity to azoxybenzene. An optimum Fe loading of 2.5 mol% in BaTiO3 is required to achieve 100% conversion with 93% selectivity whereas Ni with 5 mol% showed a conversion of 93% and a azoxybenzene selectivity of 84%. This journal is
Continuous Flow Synthesis of Azoxybenzenes by Reductive Dimerization of Nitrosobenzenes with Gel-Bound Catalysts
Schmiegel, Carsten J.,Berg, Patrik,Obst, Franziska,Schoch, Roland,Appelhans, Dietmar,Kuckling, Dirk
, p. 1628 - 1636 (2021/03/15)
In the search for a new synthetic pathway for azoxybenzenes with different substitution patterns, an approach using a microfluidic reactor with gel-bound proline organocatalysts under continuous flow is presented. Herein the formation of differently substituted azoxybezenes by reductive dimerization of nitrosobenzenes within minutes at mild conditions in good to almost quantitative yields is described. The conversion within the microfluidic reactor is analyzed and used for optimizing and validating different parameters. The effects of the different functionalities on conversion, yield, and reaction times are analyzed in detail by NMR. The applicability of this reductive dimerization is demonstrated for a wide range of differently substituted nitrosobenzenes. The effects of these different functionalities on the structure of the obtained azoxyarenes are analyzed in detail by NMR and single-crystal X-ray diffraction. Based on these results, the turnover number and the turnover frequency were determined.
Preparation of niobium or tantalum complex and application of niobium or tantalum complex in catalyzing aromatic amine to generate oxidized azobenzene compound
-
Paragraph 0052-0055, (2021/11/03)
The invention provides a preparation method of niobium or tantalum complex and an application of the niobium or tantalum complex in catalyzing aromatic amine to generate an oxidized azobenzene compound. The preparation method of the complex comprises A hydration oxide preparation, @timetime@ niobium oxide or tantalum oxide and strong base in 300 - 800 °C melting calcination 2 - 8h, adding water to dissolve and filter, and then adjusting pH through 4-6, suction filtration and drying. The B complex is prepared by mixing a hydrated oxide with a molar ratio 10-25: 1 with hydrogen peroxide, adding an organic acid and a cationic precursor after clarifying the solution, and evaporating and drying to obtain a niobium complex or a tantalum complex. The molar ratio @timetime@: 1-3. In the method for synthesizing the oxidized azobenzene compound by using niobium or tantalum complex as a catalyst, ethanol is used as a solvent, hydrogen peroxide is used as an oxidant, niobium complex or tantalum complex is used as a catalyst, and the addition amount is ppm.