93-58-3Relevant articles and documents
Aerobic oxidative cleavage and esterification of C[dbnd]C bonds catalyzed by iron-based nanocatalyst
An, Yue,Fu, Weiru,Tan, Shangzhi,Wang, Lianyue,Yu, Xiangzhu,Zhao, Zhengjia,Zhu, Lina
, (2022/02/03)
Functionalization of C[dbnd]C bonds by oxidative cleavage plays an important role in organic synthesis. However, the traditional functionalized products are mainly aldehydes, ketones and carboxylic acids, and the substrates are limited to examples of active aromatic olefins with very scarce inactive olefins. Herein we disclose an efficient protocol for the direct formation of esters by oxidative cleavage of C[dbnd]C bonds using heterogeneous iron nanocomposite catalyst supported on nitrogen-doped carbon materials with molecular oxygen and tert-butylhydroperoxide (TBHP) as the oxidants. The results show that molecular oxygen as the terminal oxidant is mainly responsible for the cleavage process, and that the auxiliary oxidant TBHP promotes the formation of the intermediate epoxide, thus increasing the selectivity of the product. The catalytic system has a wide range of substrate compatibility involving the challenging inactive aliphatic and long-chain alkyl aryl olefins. The catalyst was reused seven times with no loss in catalytic activity. Characterization and control experiments uncover that the core-shell Fe and Fe3C nanoparticles encapsulated by graphitic carbon play a predominant role in catalyzing the oxidative cleavage of olefins to esters. Preliminary mechanistic studies disclose that this process involves both free radical reactions and tandem sequential reactions.
Synthesis and pyrolysis of two novel pyrrole ester flavor precursors
Cheng, Biao,Chu, Wenjuan,Fan, Wenpeng,Feng, Yingjie,Gao, Ziting,Ji, Xiaoming,Lai, Miao,Tian, Haiying,Zhang, Zhan
, (2022/03/31)
In order to develop the high-temperature-released pyrrole aroma, two novel flavors precursors of methyl 2-methyl-5-(((2-methylbutanoyl)oxy)methyl)-1-propyl-1H-pyrrole-3-carboxylate and methyl 2-methyl-5-(((2-methylbutanoyl)oxy)methyl)-1-propyl-1H-pyrrole-3-carboxylate were synthesized using glucosamine hydrochloride and methyl acetoacetate as raw materials through cyclization, oxidation, alkylation, reduction, and esterification. The target compounds were characterized by nuclear magnetic resonance (1H NMR, 13C NMR), infrared spectroscopy (IR) and high-resolution mass spectrometry (HRMS). Thermogravimetry (TG), differential scanning calorimeter (DSC) and the pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) methods were used to analyze the heating-stability of the target compounds, and the pyrolysis mechanism was inferred. Py-GC/MS results indicated that some fragrance compounds were formed during?thermal degradation such as 2-methylbutyric acid, 2-methylbutyrate, alkylpyrroles, and benzoic acid, which were important aroma components or flavor additives. This provided a theoretical reference for the application of pyrrole ester in cigarette and heat-processed food flavoring.
Carboxyl Methyltransferase Catalysed Formation of Mono- and Dimethyl Esters under Aqueous Conditions: Application in Cascade Biocatalysis
Ashbrook, Chloe,Carnell, Andrew J.,Goulding, Ellie,Hatton, Harry,Johnson, James R.,Kershaw, Neil M.,McCue, Hannah V.,Rigden, Daniel J.,Ward, Lucy C.
supporting information, (2022/02/21)
Carboxyl methyltransferase (CMT) enzymes catalyse the biomethylation of carboxylic acids under aqueous conditions and have potential for use in synthetic enzyme cascades. Herein we report that the enzyme FtpM from Aspergillus fumigatus can methylate a broad range of aromatic mono- and dicarboxylic acids in good to excellent conversions. The enzyme shows high regioselectivity on its natural substrate fumaryl-l-tyrosine, trans, trans-muconic acid and a number of the dicarboxylic acids tested. Dicarboxylic acids are generally better substrates than monocarboxylic acids, although some substituents are able to compensate for the absence of a second acid group. For dicarboxylic acids, the second methylation shows strong pH dependency with an optimum at pH 5.5–6. Potential for application in industrial biotechnology was demonstrated in a cascade for the production of a bioplastics precursor (FDME) from bioderived 5-hydroxymethylfurfural (HMF).
Using Data Science To Guide Aryl Bromide Substrate Scope Analysis in a Ni/Photoredox-Catalyzed Cross-Coupling with Acetals as Alcohol-Derived Radical Sources
Doyle, Abigail G.,Gandhi, Shivaani S.,Jiang, Shutian,Kariofillis, Stavros K.,Martinez Alvarado, Jesus I.,?urański, Andrzej M.
supporting information, p. 1045 - 1055 (2022/01/19)
Ni/photoredox catalysis has emerged as a powerful platform for C(sp2)–C(sp3) bond formation. While many of these methods typically employ aryl bromides as the C(sp2) coupling partner, a variety of aliphatic radical sources have been investigated. In principle, these reactions enable access to the same product scaffolds, but it can be hard to discern which method to employ because nonstandardized sets of aryl bromides are used in scope evaluation. Herein, we report a Ni/photoredox-catalyzed (deutero)methylation and alkylation of aryl halides where benzaldehyde di(alkyl) acetals serve as alcohol-derived radical sources. Reaction development, mechanistic studies, and late-stage derivatization of a biologically relevant aryl chloride, fenofibrate, are presented. Then, we describe the integration of data science techniques, including DFT featurization, dimensionality reduction, and hierarchical clustering, to delineate a diverse and succinct collection of aryl bromides that is representative of the chemical space of the substrate class. By superimposing scope examples from published Ni/photoredox methods on this same chemical space, we identify areas of sparse coverage and high versus low average yields, enabling comparisons between prior art and this new method. Additionally, we demonstrate that the systematically selected scope of aryl bromides can be used to quantify population-wide reactivity trends and reveal sources of possible functional group incompatibility with supervised machine learning.
HCl-Catalyzed Aerobic Oxidation of Alkylarenes to Carbonyls
Ding, Ling,Liu, Yuxiu,Niu, Kaikai,Shi, Xiaodi,Song, Hongjian,Wang, Qingmin
, (2021/12/13)
The construction of C?O bonds through C?H bond functionalization remains fundamentally challenging. Here, a practical chlorine radical-mediated aerobic oxidation of alkylarenes to carbonyls was developed. This protocol employed commercially available HCl as a hydrogen atom transfer (HAT) reagent and air as a sustainable oxidant. In addition, this process exhibited excellent functional group tolerance and a broad substrate scope without the requirement for external metal and oxidants. The mechanistic hypothesis was supported by radical trapping, 18O labeling, and control experiments.
Selective Oxidation of Benzylic sp3C-H Bonds using Molecular Oxygen in a Continuous-Flow Microreactor
Ma, Cunfei,Meng, Qingwei,Tang, Xiaofei,Yu, Zongyi,Yun, Lei,Zhao, Jingnan
, p. 1612 - 1618 (2021/07/21)
Selective aerobic oxidation of benzylic sp3 C-H bonds to generate the corresponding ketones was achieved under continuous-flow conditions. The catalysts N-hydroxyphthalimide (NHPI) and tert-butyl nitrite (TBN) as the precursor of the radical under aerobic conditions motivated this process. Flow microreactors operating under optimized conditions enabled this oxidation with higher efficiency and a shortened reaction time of 54 s (total time was 10 min), which was improved 466 times compared with the batch parallel reaction (7.0 h). Notably, the catalyst and solvent recycling (92.6 and 94.5%) and scale-up experiments (0.87 g h-1 in 28 h) demonstrated the practicability of the protocol. The high product selectivity and functional group tolerance of the process allowed the production of ketones in yields of 41.2 to 90.3%. To reveal the versatility and applicability of this protocol, the late-stage modification of an antiepileptic drug to obtain oxcarbazepine was further conducted.
Mn(III) active site in hydrotalcite efficiently catalyzes the oxidation of alkylarenes with molecular oxygen
Wang, Anwei,Zhou, WeiYou,Sun, Zhonghua,Zhang, Zhong,Zhang, Zhihui,He, MingYang,Chen, Qun
, (2020/12/07)
Developing efficient heterogeneous catalytic systems based on easily available materials and molecular oxygen for the selective oxidation of alkylarenes is highly desirable. In the present research, NiMn hydrotalcite (Ni2Mn-LDH) has been found as an efficient catalyst in the oxidation of alkylarenes using molecular oxygen as the sole oxidant without any additive. Impressive catalytic performance, excellent stability and recyclability, broad applicable scope and practical potential for the catalytic system have been observed. Mn3+ species was proposed to be the efficient active site, and Ni2+ played an important role in stabilizing the Mn3+ species in the hydrotalcite structure. The kinetic study showed that the aerobic oxidation of diphenylmethane is a first-order reaction over Ni2Mn-LDH with the activation energy (Ea) and pre-exponential factor (A0) being 85.7 kJ mol?1 and 1.8 × 109 min?1, respectively. The Gibbs free energy (ΔG≠) was determined to be -10.4 kJ mol-1 K-1 for the oxidation based on Eyring-Polanyi equation, indicating the reaction is exergonic. The mechanism study indicated that the reaction proceeded through both radical and carbocation intermediates. The two species were then trapped by molecular oxygen and H2O or hydroxyl species, respectively, to yield the corresponding products. The present research might provide information for constructing highly efficient and stable active site for the catalytic aerobic oxidation based on available and economic material.
Rational Construction of an Artificial Binuclear Copper Monooxygenase in a Metal-Organic Framework
Feng, Xuanyu,Song, Yang,Chen, Justin S.,Xu, Ziwan,Dunn, Soren J.,Lin, Wenbin
supporting information, p. 1107 - 1118 (2021/01/25)
Artificial enzymatic systems are extensively studied to mimic the structures and functions of their natural counterparts. However, there remains a significant gap between structural modeling and catalytic activity in these artificial systems. Herein we report a novel strategy for the construction of an artificial binuclear copper monooxygenase starting from a Ti metal-organic framework (MOF). The deprotonation of the hydroxide groups on the secondary building units (SBUs) of MIL-125(Ti) (MIL = Matériaux de l'Institut Lavoisier) allows for the metalation of the SBUs with closely spaced CuI pairs, which are oxidized by molecular O2 to afford the CuII2(μ2-OH)2 cofactor in the MOF-based artificial binuclear monooxygenase Ti8-Cu2. An artificial mononuclear Cu monooxygenase Ti8-Cu1 was also prepared for comparison. The MOF-based monooxygenases were characterized by a combination of thermogravimetric analysis, inductively coupled plasma-mass spectrometry, X-ray absorption spectroscopy, Fourier-transform infrared spectroscopy, and UV-vis spectroscopy. In the presence of coreductants, Ti8-Cu2 exhibited outstanding catalytic activity toward a wide range of monooxygenation processes, including epoxidation, hydroxylation, Baeyer-Villiger oxidation, and sulfoxidation, with turnover numbers of up to 3450. Ti8-Cu2 showed a turnover frequency at least 17 times higher than that of Ti8-Cu1. Density functional theory calculations revealed O2 activation as the rate-limiting step in the monooxygenation processes. Computational studies further showed that the Cu2 sites in Ti8-Cu2 cooperatively stabilized the Cu-O2 adduct for O-O bond cleavage with 6.6 kcal/mol smaller free energy increase than that of the mononuclear Cu sites in Ti8-Cu1, accounting for the significantly higher catalytic activity of Ti8-Cu2 over Ti8-Cu1.
Br?nsted acid-catalyzed chlorination of aromatic carboxylic acids
Yu, Zhiqun,Yao, Hongmiao,Xu, Qilin,Liu, Jiming,Le, Xingmao,Ren, Minna
supporting information, p. 685 - 689 (2021/04/09)
The chlorination of aromatic carboxylic acids with SOCl2 has been effectively performed by reacting with a Br?nsted acid as the catalyst. Based on this discovery, an efficient catalytic method that is cheaper than traditional catalytic methods was developed. 20 substrates were chlorinated offering excellent yields in a short reaction time. And the SOCl2/Br?nsted acid system has been used in a larger scale preparative reaction. A dual activation mechanism was proposed to prove the irreplaceable system of SOCl2/Br?nsted acid.
PCl3-mediated transesterification and aminolysis of tert-butyl esters via acid chloride formation
Wu, Xiaofang,Zhou, Lei,Li, Fangshao,Xiao, Jing
, p. 491 - 497 (2021/01/20)
A PCl3-mediated conversion of tert-butyl esters into esters and amides in one-pot under air is developed. This novel protocol is highlighted by the synthesis of skeletons of bioactive molecules and gram-scale reactions. Mechanistic studies revealed that this transformation involves the formation of an acid chloride in situ, which is followed by reactions with alcohols or amines to afford the desired products.
