18666-27-8

Upstream product

• 100-42-5 styrene 
• 775-12-2 diphenylsilane 
• 405-99-2 para-fluorostyrene 
• 80-10-4 diphenylsilyl dichloride 
• 17950-94-6 dideuteriodiphenylsilane 
• 536-74-3 phenylacetylene 
• 98-86-2 acetophenone 

Downstream Products

• 1062505-05-8 S(R)-N-[(1R)-1-(phenethyldiphenylsilyl)butyl]-2-methylpropane-2-sulfinamide 
• 1584730-85-7 C₂₀H₁₉⁽²⁾HSi 
• 1091-24-3 1,1-diphenyl-2,3-dihydro-1H-benzo[b]silole 
• 7768-28-7 2-(2-hydroxyphenyl)ethanol 
• 1355956-65-8 1,1-diphenyl-1H-benzo[b]silole 
• 496-16-2 2.3-dihydrobenzofuran 

Relevant academic research and scientific papers

Titanium-catalyzed hydrosilylation of olefins: A comparison study on Cp2TiCl2/Sm and Cp2TiCl2/LiAlH4 catalyst system

Hydrosilylation of olefins catalyzed by Cp2TiCl2/Sm (Cp = cyclopentadienyl) under solvent free conditions have been investigated. By using Cp2TiCl2/Sm as catalyst system, β-adducts and hydrogenation products were detected. Hydrosilylation of olefins catalyzed by Cp2TiCl2/LiAlH4 under room temperature has also been studied. The influence of TEMPO (2,2,6,6-tetramethylpiperidine-1-oxyl) on Cp2TiCl2/Sm and Cp2TiCl2/LiAlH4, respectively, indicated that hydrosilylation of olefins catalyzed with Cp2TiCl2/Sm went through a free radical reaction pathway while a coordination mechanism was applied for Cp2TiCl2/LiAlH4 catalyst system.

Highly active cobalt complex catalysts used for alkene hydrosilylation

A series of nitrogen phosphine ligands were synthesized, and the hydrosilylation reaction of alkenes catalyzed using MCl2 in the presence of these ligands was investigated. FeCl2/1(N1, N1, N2, N2-Tetrakis[(diphenylphosphino)methyl]ethane-1,2-diamine) showed low catalytic activity. MnCl2/1, CrCl3/1 and NiCl2/1 showed some catalytic activity. The CoCl2/N,P-ligand catalyst system showed high activity as well as excellent selectivity (The selectivity of the β-adduct was ~100%.) in the hydrosilylation reaction. CoCl2/1 showed the highest catalytic activity (~ >99.9% conversion of 1-octene). Additionally, no α-adduct, dehydrogenative silylation product and octane were detected.

IMINOBIPYRIDINE COBALT COMPLEX, AND METHOD FOR PREPARING ORGANOSILICON COMPOUNDS BY HYDROSILYLATION REACTIONS UTILIZING IMINOBIPYRIDINE COBALT COMPLEX

PROBLEM TO BE SOLVED: To provide a metal complex which can be utilized as a catalyst for a hydrosilylation reaction of an olefin compound and a carbonyl compound. SOLUTION: There is provided an iminobipyridine cobalt complex represented by the formula (A)

Base Metal-terpyridine Complex Immobilized on Stationary Phase Aimed as Reusable Hydrosilylation Catalyst

The catalytic activity of a base metal-terpyridine complex immobilized on silica gel (M(tpy)X2@SiO2/H2O: M=Mn, Fe, Co, Ni, Cu; X=Cl, Br) for hydrosilylation was investigated. Co(tpy)Br2@SiO2/H2/

Cobalt bis(2-ethylhexanoate) and terpyridine derivatives as catalysts for the hydrosilylation of olefins

A simple method for the hydrosilylation of olefins by using air-stable cobalt catalysts is developed. The catalyst system is composed of simple, cheap, and readily available cobalt(II) salts and well-defined terpyridine derivatives as cocatalysts or ligands, and the hydrosilylation processes can be processed smoothly under mild conditions without either Grignard reagents or NaHBEt3 as activator.

Catalytic hydrosilylation of olefins and ketones by base metal complexes bearing a 2,2′:6′,2″-terpyridine ancillary ligand

The activities of [M(tpy)Br2] (M = Mn, Co, Ni, or Cu) for the hydrosilylation of olefins and ketones were investigated in the presence of NaBHEt3 as an activator. [Co(tpy)Br2] and [Ni(tpy)Br2] showed catalytic a

Selectivity Reverse of Hydrosilylation of Aryl Alkenes Realized by Pyridine N-Oxide with [PSiP] Pincer Cobalt(III) Hydride as Catalyst

Six silyl cobalt(III) hydrides 1-6 with [PSiP] pincer ligands having different substituents at the P and Si atoms ([(2-Ph2PC6H4)2MeSiCo(H)(Cl)(PMe3)] (1), [(2-Ph2PC6H4)2HSiCo(H)(Cl)(PMe3)] (2), [(2-Ph2PC6H4)2PhSiCo(H)(Cl)(PMe3)] (3), [(2-iPr2PC6H4)2HSiCo(H)(Cl)(PMe3)] (4), [(2-iPr2PC6H4)2MeSiCo(H)(Cl)(PMe3)] (5), and [(2-iPr2PC6H4)2PhSiCo(H)(Cl)(PMe3)] (6)) were synthesized through the reactions of the ligands (L1-L6) with CoCl(PMe3)3 via Si-H bond cleavage. Compounds 1-6 have catalytic activity for alkene hydrosilylation, and among them, complex 3 is the best catalyst with excellent anti-Markovnikov regioselectivity. A silyl dihydrido cobalt(III) complex 7 from the reaction of 3 with Ph2SiH2 was isolated, and its catalytic activity is equivalent to that of complex 3. Complex 7 and its derivatives 10-12 could also be obtained through the reactions of complexes 3, 1, 4, and 5 with NaBHEt3. The molecular structure of 7 was indirectly verified by the structures of 10-12. To our delight, the addition of pyridine N-oxide reversed the selectivity of the reaction, from anti-Markovnikov to Markovnikov addition. At the same time, the reaction temperature was reduced from 70 to 30 °C on the premise of high yield and excellent selectivity. However, this catalytic system is only applicable to aromatic alkenes. On the basis of the experimental information, two reaction mechanisms are proposed. The molecular structures of cobalt(III) complexes 3-6 and 10-12 were determined by single crystal X-ray diffraction analysis.

Synthesis and properties of [PCP] pincer silylene cobalt(i) complexes

In this study, two [PCP] pincer silylene cobalt(i) complexes [((Ph2POCH2)2CH)Co(PMe3)(SiCl((NtBu)2CAr))] (Ar = Ph (2) and 4-MePh (3)) were synthesized through the substitution reaction of t

Solvent-Free Hydrosilylation of Alkenes Catalyzed by Well-Defined Low-Valent Cobalt Catalysts

A solvent-free cobalt-catalyzed highly selective hydrosilylation of alkenes has been developed. It was found that both Co(PMe3)4 and CoCl(PMe3)3 are highly active catalysts for hydrosilylation of alkenes. The former promoted Markovnikov-type hydrosilylation of the aryl alkenes, while the latter catalyzed anti-Markovnikov-type hydrosilylation of the alkyl alkenes. These two catalytic systems tolerate a variety of functional groups and provide high selectivity and medium to high yield. In the exploration of the reaction mechanism, a dinuclear silyl cobalt(I) complex [(PMe3)2Co(μ-?2-HSiPh2)2Co(PMe3)2] (4) from the Co(PMe3)4 system and a silyl cobalt dihydride [(PMe3)3Co(H)2SiClPh2] (5) from the CoCl(PMe3)3 system were obtained. It is proposed that the silyl cobalt(I) intermediate, [Co(PMe3)3(SiHPh2)], is the real catalyst for the Co(PMe3)4 system, while the hydrido cobalt(I) intermediate, [HCo(PMe3)3], is the real catalyst for the CoCl(PMe3)3 system. Complexes 4 and 5 were characterized by spectroscopic methods and single-crystal X-ray diffraction.

-Chelate Cobalt(III) Hydride Catalyzed Hydrosilylation of Alkenes

Bidentate ligand 2-diphenylphosphinobenzaldehyde or 2-diisopropylphosphinobenzaldehyde reacted with CoCl(PMe3)3 to give [P,C]-chelate cobalt(III) hydrides [mer-(Me3P)3Co(H)(Cl)(o-Ph2P-C6H4-C═O)] (1) or [mer-(Me3P)3Co(H)(Cl)(o-iPr2P-C6H4-C═O)] (2), respectively. Complex 2 was new and characterized by spectroscopic methods and single-crystal X-ray diffraction analysis. It was found that both complex 1 and 2 are active catalysts for hydrosilylation of alkenes. Although the catalytic activity of 1 is slightly higher, catalyst 1 and 2 have the same selectivity. The selectivity for aromatic alkenes is mainly of the Markovnikov type, while the selectivity for aliphatic alkenes is almost 100% anti-Markovnikov type. In the study of the reaction mechanism, a silyl cobalt dihydride [(Ph2ClSi)Co(H)2(PMe3)3] was isolated from the stoichiometric reaction of hydride 1 with Ph2SiH2. The catalytic mechanism for alkene hydrosilylation with [HCo(PMe3)3] as a real catalyst is proposed and discussed with the experimental results.