22436-06-2Relevant academic research and scientific papers
Highly stereoselective α-alkylations, 1,4-additions, and one-pot 1,4-addition/α-methylations achieved on 4-O-acyl and 4-O-crotonyl derivatives of methyl 6-deoxy-2,3-di-O-(t-butyldimethylsilyl)-α-D-glucopyranoside
Totani,Asano,Takao,Tadano
, p. 1772 - 1776 (2001)
Benzylation or methylation of the enolate generated from 4-O-propionyl or 4-O-3-phenyl-propionyl derivatives of methyl 6-deoxy-2,3-di-O-(t-butyldimethylsilyl)-α-D-glucopyranoside provided the respective C-alkylated product stereoselectively. The 1,4-additions of a variety of carbon nucleophiles to the corresponding 4-O-crotonyl derivative provided adducts with high and complementary diastereoselection. The one-pot 1,4-additions of a phenyl nucleophile to the 4-O-crotonyl ester followed by the addition of methyl iodide provided vicinally substituted products with high diastereo- and enantioselectivity, from which diastereomeric α-methyl-β-phenylbutanols were obtained in enantioenriched form after reductive removal of the carbohydrate template.
Molecular basis for enantioselectivity of lipase from Pseudomonas cepacia toward primary alcohols. Modeling, kinetics, and chemical modification of Tyr29 to increase or decrease enantioselectivity
Tuomi, W. Victor,Kazlauskas, Romas J.
, p. 2638 - 2647 (1999)
Lipase from Pseudomonas cepacia (PCL) shows good enantioselectivity toward primary alcohols. An empirical rule can predict which enantiomer of a primary alcohol reacts faster, but there is no reliable strategy to increase the enantioselectivity. We used a combination of molecular modeling of lipase-transition state analogue complexes and kinetic measurements to identify the molecular basis of the enantioselectivity toward two primary alcohols: 2-methyl-3-phenyl-1-propanol, 1, and 2-phenoxy-1-propanol, 2. In hydrolysis of the acetate esters, PCL favors the (S)-enantiomer of both substrates (E = 16 and 17, respectively), but, due to changes in priorities of the substituents, the (S)-enantiomers of 1 and 2 have opposite shapes. Computer modeling of transition state analogues bound to PCL show that primary alcohols bind to PCL differently than secondary alcohols. Modeling and kinetics suggest that the enantioselectivity of PCL toward 1 comes from the binding of the methyl group at the stereocenter within a hydrophobic pocket for the fast-reacting enantiomer, but not for the slow-reacting enantiomer. On the other hand, the enantioselectivity toward 2 comes from an extra hydrogen bond between the phenoxy oxygen of the substrate to the phenolic OH of Tyr29. This hydrogen bond may slow release of the (R)-alcohol and thus account for the reversal of enantioselectvity. To decrease the enantioselectivity of PCL toward 2-acetate by a factor of 2 to E = 8, we eliminated the hydrogen bond by acetylation of the tyrosyl residues with N- acetylimidazole. To increase the enantioselectivity of PCL toward 2-acetate by a factor of 2 to E = 36, we increased the strength of the hydrogen bond by nitration of the tyrosyl residues with tetranitromethane. This is one of the first examples of a rationally designed modification of a lipase to increase enantioselectivity.
A drop of enantioselectivity in the Pseudomonas cepacia lipase-catalyzed ester hydrolysis is influenced by the chain length of the fatty acid
Tafi, Andrea,Manetti, Fabrizio,Botta, Maurizio,Casati, Silvana,Santaniello, Enzo
, p. 2345 - 2350 (2004)
A two-step molecular mechanics based computational procedure has been applied to explain the enantioselectivity observed in the hydrolysis of esters of primary alcohols, carried out in the presence of a lipase from Pseudomonas cepacia. This approach proved to be very effective in explaining an unpredictable drop in enantioselectivity, experimentally observed when the chain of the fatty acid was lengthened and to predict the chain length in correspondence of which the effect should have revealed itself.
Bifunctional chiral auxiliaries 4: Alkylation of enolates derived from 1,3-diacyl-trans-4,5-tetramethyleneimidazolidin-2-ones
Davies,Mortlock
, p. 1117 - 1120 (1992)
Addition of alkyl halides to sodium and potassium enolates of 1,3-diacyl-trans-4,5-tetramethyleneimidazolidin-2-ones allows diastereoselective alkylation of both acyl sidechains with the latter enolates showing generally higher stereoselectivities. S-(-)-3-Phenyl-2-methylpropan-1-ol 6 was prepared in this way with a 93% enantiomeric excess.
Diastereoselective Alkylation Reactions Employing a Camphor-Based Chiral Oxazinone Auxialiary
Ahn, Kyo Han,Lim, Ankee,Lee, Seungkyu
, p. 2435 - 2436 (1993)
An almost complete ?-face selectivity is obtained in asymmetric alkylation reactions of lithium enolates derived from imide 2 which contains a camphor-based chiral auxialiary.
Diastereoselective enolate chemistry using atropisomeric amides
Hughes, Adam D.,Price, David A.,Shishkin, Oleg,Simpkins, Nigel S.
, p. 7607 - 7610 (1996)
The alkylations and aldol reactions of certain atropisomeric amides, derived from ortho-tert-butyl aniline, are highly diastereoselective.
Your mother was right, washing matters: An alkyne-analog of ibuprofen reveals unwanted reactivity of aromatic compounds with proteins during copper-catalyzed click chemistry
Cutolo, Giuliano,Pratt, Matthew R.,Shankar, Sahiti N.
supporting information, (2021/07/19)
Bioorthogonal chemistry, in particular the copper(I)-catalyzed azide-alkyne cycloaddition (CuAAC), has enabled the robust identification of covalent protein targets of probes and drugs. Ibuprofen is commonly used pain and fever reducer and is sold as an enantiomeric racemate. Interestingly, the stereoisomers can be enzymatically converted through an ibuprofen-CoA thioester intermediate, which might non-specifically react with protein nucleophiles. Here, we use an alkyne-analog of ibuprofen to make two discoveries. First, we find that ibuprofen likely does not result in notable chemical labeling of proteins. However, we secondly find that aromatic compounds can react with proteins during the CuAAC reaction unless they are appropriately washed out of the mixture. This second discovery of false positive labeling has important technical implications for the application of this approach.
Deep eutectic solvents as H2-sources for Ru(II)-catalyzed transfer hydrogenation of carbonyl compounds under mild conditions
Cavallo, Marzia,Arnodo, Davide,Mannu, Alberto,Blangetti, Marco,Prandi, Cristina,Baratta, Walter,Baldino, Salvatore
supporting information, (2021/02/22)
The employment of easily affordable ruthenium(II)-complexes as pre-catalysts in the transfer hydrogenation of carbonyl compounds in deep eutectic media is described for the first time. The eutectic mixture tetrabutylammonium bromide/formic acid = 1/1 (TBABr/HCOOH = 1/1) acts both as reaction medium and hydrogen source. The addition of a base is required for the process to occur. An extensive optimization of the reaction conditions has been carried out, in terms of catalyst loading, type of complexes, H2-donors, reaction temperature and time. The combination of the dimeric complex [RuCl(p-cymene)-μ-Cl]2 (0.01–0.05 eq.) and the ligand dppf (1,1′-ferrocenediyl-bis(diphenylphosphine)ferrocene) in 1/1 molar ratio has proven to be a suitable catalytic system for the reduction of several and diverse aldehydes and ketones to their corresponding alcohols under mild conditions (40–60 °C) in air, showing from moderate to excellent tolerability towards different functional groups (halogen, cyano, nitro, phenol). The reduction of imine compounds to their corresponding amine derivatives was also studied. In addition, the comparison between the results obtained in TBABr/HCOOH and in organic solvents suggests a non-innocent effect of the DES medium during the process.
A Water/Toluene Biphasic Medium Improves Yields and Deuterium Incorporation into Alcohols in the Transfer Hydrogenation of Aldehydes
Ruiz-Casta?eda, Margarita,Santos, Lucía,Manzano, Blanca R.,Espino, Gustavo,Jalón, Félix A.
, p. 1358 - 1372 (2021/03/16)
Deuterium labeling is an interesting process that leads to compounds of use in different fields. We describe the transfer hydrogenation of aldehydes and the selective C1 deuteration of the obtained alcohols in D2O, as the only deuterium source. Different aromatic, alkylic and α,β-unsaturated aldehydes were reduced in the presence of [RuCl(p-cymene)(dmbpy)]BF4, (dmbpy=4,4′-dimethyl-2,2′-bipyridine) as the pre-catalyst and HCO2Na/HCO2H as the hydrogen source. Moreover, furfural and glucose, were selectively reduced to the valuable alcohols, furfuryl alcohol and sorbitol. The processes were carried out in neat water or in a biphasic water/toluene system. The biphasic system allowed easy recycling, higher yields, and higher selective D incorporation (using D2O/toluene). The deuteration took place due to an efficient effective M–H/D+ exchange from D2O that allows the inversion of polarity of D+ (umpolung). DFT calculations that explain the catalytic behavior in water are also included.
Carbon monoxide and hydrogen (syngas) as a C1-building block for selective catalytic methylation
Kaithal, Akash,H?lscher, Markus,Leitner, Walter
, p. 976 - 982 (2021/02/06)
A catalytic reaction using syngas (CO/H2) as feedstock for the selective β-methylation of alcohols was developed whereby carbon monoxide acts as a C1 source and hydrogen gas as a reducing agent. The overall transformation occurs through an intricate network of metal-catalyzed and base-mediated reactions. The molecular complex [Mn(CO)2Br[HN(C2H4PiPr2)2]]1comprising earth-abundant manganese acts as the metal component in the catalytic system enabling the generation of formaldehyde from syngas in a synthetically useful reaction. This new syngas conversion opens pathways to install methyl branches at sp3carbon centers utilizing renewable feedstocks and energy for the synthesis of biologically active compounds, fine chemicals, and advanced biofuels.
