23395-72-4Relevant academic research and scientific papers
Dehydrogenation of N-Heterocyclic Compounds Using H2O2 and Mediated by Polar Solvents
Llopis, Natalia,Gisbert, Patricia,Baeza, Alejandro,Correa-Campillo, Jara
supporting information, p. 1205 - 1210 (2022/02/25)
The oxidative dehydrogenation of N-heterocyclic compounds by using H2O2 as oxidant in combination with polar solvents such as 1,1,1,3,3,3-hexafluoroisopropanol (HFIP) and H2O is described. Among these two solvents, the best yields for the heteroaromatic compounds were generally achieved in HFIP. However, it is remarkable, that the use of a non toxic solvent such as H2O gave such good yields. Furthermore, the procedure was implemented in larger-scale and HFIP was distilled from the reaction mixture and reused (up to 5 cycles) without a significant detriment in the reaction outcome. (Figure presented.).
A “universal” catalyst for aerobic oxidations to synthesize (hetero)aromatic aldehydes, ketones, esters, acids, nitriles, and amides
Bartling, Stephan,Beller, Matthias,Chandrashekhar, Vishwas G.,Jagadeesh, Rajenahally V.,Rabeah, Jabor,Rockstroh, Nils,Senthamarai, Thirusangumurugan
supporting information, p. 508 - 531 (2022/02/11)
Functionalized (hetero)aromatic compounds are indispensable chemicals widely used in basic and applied sciences. Among these, especially aromatic aldehydes, ketones, carboxylic acids, esters, nitriles, and amides represent valuable fine and bulk chemicals, which are used in chemical, pharmaceutical, agrochemical, and material industries. For their synthesis, catalytic aerobic oxidation of alcohols constitutes a green, sustainable, and cost-effective process, which should ideally make use of active and selective 3D metals. Here, we report the preparation of graphitic layers encapsulated in Co-nanoparticles by pyrolysis of cobalt-piperazine-tartaric acid complex on carbon as a most general oxidation catalyst. This unique material allows for the synthesis of simple, functionalized, and structurally diverse (hetero)aromatic aldehydes, ketones, carboxylic acids, esters, nitriles, and amides from alcohols in excellent yields in the presence of air.
Synthesis of Nitrile-Functionalized Polydentate N-Heterocycles as Building Blocks for Covalent Triazine Frameworks
Debruyne, Maarten,Everaert, Jonas,Heugebaert, Thomas S. A.,Stevens, Christian V.,Van Der Voort, Pascal,Van Hecke, Kristof,Van Speybroeck, Veronique,Vanden Bussche, Flore
, (2021/10/21)
Covalent triazine frameworks (CTFs) based on polydentate ligands are highly promising supports to anchor catalytic metal complexes. The modular nature of CTFs allows to tailor the composition, structure, and function to its specific application. Access to a broad range of chelating building blocks is therefore essential. In this respect, we extended the current available set of CTF building blocks with new nitrile-functionalized N-heterocyclic ligands. This paper presents the synthesis of the six ligands which vary in the extent of the aromatic system and the denticity. The new building blocks may help in a rational design of enhanced support materials in catalysis.
Method for continuous preparation of nitriles in a pipelined reactor (by machine translation)
-
Paragraph 0036-0047; 0056; 0058, (2020/12/14)
The method comprises the following steps that a tin catalyst is coated on the inner wall of the pipeline reactor; and the method comprises the following steps: coating a tin catalyst on the inner wall of the pipeline reactor. The amide solution and the catalytic auxiliary agent are mixed and then sent to a pipeline reactor, and the amide is dehydrated to generate nitrile at the reaction pressure of 0.1 - 2.0 mpa and 100 - 200 °C reaction temperature. The resulting reaction product was separated to give the crude product of the nitrile to which the amide corresponded. In the pipeline reactor, the corresponding nitrile is continuously prepared under the action of the tin catalyst, a dehydrating agent is not needed, byproducts only are water, and three wastes are reduced. (by machine translation)
Method for converting aromatic aldehyde into aromatic nitrile by using sulfur powder promoted inorganic ammonium as nitrogen source (by machine translation)
-
Paragraph 0080; 0081, (2020/09/12)
The invention discloses a method for converting aromatic aldehyde into aromatic nitrile. The method is conversion of high yield of aromatic aldehyde one-pot reaction of sulfur powder promoted inorganic ammonium as a nitrogen source into aromatic nitrile. The method has the advantages of no need of metal participation, no need of strong oxide, compatibility of reaction to air, easiness in amplification to a gram scale and the like, and overcomes the problems of harsh reaction conditions, complex operation, low functional group compatibility and the like in the prior art. (by machine translation)
Zn-catalyzed cyanation of aryl iodides
Zhao, Lulu,Dong, Yanan,Xia, Qiangqiang,Bai, Jianfei,Li, Yuehui
, p. 6471 - 6477 (2020/06/08)
We report the first example of zinc-catalyzed cyanation of aryl iodides with formamide as the cyanogen source. The transformation was promoted by the bisphosphine Nixantphos ligand. Under optimized conditions, a variety of electron-donating and electron-withdrawing aryl iodides were converted into nitrile products in good to excellent yields. This approach is an exceedingly simple and benign method for the synthesis of aryl nitriles and is likely to proceed via a dinuclear Zn-concerted catalysis.
Atomically Dispersed Ru on Manganese Oxide Catalyst Boosts Oxidative Cyanation
Gates, Bruce C.,Guan, Erjia,Meng, Xiangju,Wang, Chengtao,Wang, Hai,Wang, Liang,Wang, Sai,Xiao, Feng-Shou,Xu, Dongyang,Xu, Hua,Yang, Bo,Zhang, Jian
, p. 6299 - 6308 (2020/07/21)
There is a strong incentive for environmentally benign and sustainable production of organic nitriles to avoid the use of toxic cyanides. Here we report that manganese oxide nanorod-supported single-site Ru catalysts are active, selective, and stable for oxidative cyanation of various alcohols to give the corresponding nitriles with molecular oxygen and ammonia as the reactants. The very low amount of Ru (0.1 wt %) with atomic dispersion boosts the catalytic performance of manganese oxides. Experimental and theoretical results show how the Ru sites enhance the ammonia resistance of the catalyst, bolstering its performance in alcohol dehydrogenation and oxygen activation, the key steps in the oxidative cyanation. This investigation demonstrates the high efficiency of a single-site Ru catalyst for nitrile production.
Method for continuous preparation of nitriles by amides (by machine translation)
-
Paragraph 0033-0054; 0061-0066, (2020/12/15)
The method comprises the following steps: preparing a lead salt supported by a molecular sieve by a lead salt and a molecular sieve through an impregnation method; and filling a molecular sieve-loaded lead catalyst into a fixed bed reactor. The amide or amide solution is sent into a fixed bed reactor from the top of the fixed bed to be subjected to catalytic dehydration, and the obtained reaction product is led out from the bottom of the fixed bed. The reaction product is separated to obtain the crude product of the nitrile corresponding to the amide. A fixed bed continuous production process is adopted, the reaction process is simple, the production efficiency is high, the product post-treatment is simple, and industrial production is easy to realize. (by machine translation)
A carboxamide is the cyanogen source of aromatic nitrile to the preparation method of the (by machine translation)
-
Paragraph 0015; 0016; 0017; 0018-0024; 0116; 0117-0122, (2019/05/08)
The invention discloses a method for preparing aromatic nitrile, is under the action of the nickel catalyst, in order to carboxamide is the cyanogen source, and with various substituents haloarene coupled reactions, preparing aromatic nitrile. The reaction temperature is 100 - 160 °C, the reaction time is 6 - 24 hours. It overcomes the traditional aromatic nitrile of the synthesis method operation of complex steps, requires the use of a toxic, more expensive, functionalization of the cyanogen source as the reaction raw material and the like. Compared with the traditional method, this method is simple to use cheap, green non-toxic of the formamide is cyano sources; without the need of external dehydrating agent, formamide in the nickel catalyst of the catalytic dehydration at the same time, with a nickel catalyst in coordination with the halogenated aromatic hydrocyanation, more economic, high-efficiency, environmental protection; at the same time the method exhibits good substrate universality, to air, moisture, light are not sensitive, high yield, product separation and purification is simple, with wide application. (by machine translation)
Ni-Mediated Generation of "cN" Unit from Formamide and Its Catalysis in the Cyanation Reactions
Yang, Luo,Liu, Yu-Ting,Park, Yoonsu,Park, Sung-Woo,Chang, Sukbok
, p. 3360 - 3365 (2019/03/26)
The in situ generation of a "cyano" unit from readily available organic precursors is of high interest in synthetic chemistry. Herein, we report the first example of Ni-mediated dehydration of formamide to form "CN" and its subsequent catalytic applications in the hydrocyanation of alkynes and cyanation of aryl halides. Formamide can serve as a convenient source for the nitrile unit, in that it releases water as the only byproduct.
