24167-50-8Relevant articles and documents
A facile and versatile electro-reductive system for hydrodefunctionalization under ambient conditions
Huang, Binbin,Guo, Lin,Xia, Wujiong
supporting information, p. 2095 - 2103 (2021/03/26)
A general electrochemical system for reductive hydrodefunctionalization is described, employing the inexpensive and easily available triethylamine (Et3N) as a sacrificial reductant. This protocol is characterized by facile operation, sustainable conditions, and exceptionally wide substrate scope covering the cleavage of C-halogen, N-S, N-C, O-S, O-C, C-C and C-N bonds. Notably, the selectivity and capability of reduction can be conveniently switched by simple incorporation or removal of an alcohol as a co-solvent.
Chemoselective Reduction of Tertiary Amides by 1,3-Diphenyl disiloxane (DPDS)
Aldrich, Courtney C.,Hammerstad, Travis A.,Hegde, Pooja V.,Wang, Kathleen J.
supporting information, (2022/02/10)
A convenient procedure for the chemoselective reduction of tertiary amides at room temperature in the presence of air and moisture using 1,3-diphenyldisiloxane (DPDS) is developed. The reaction conditions tolerate a significant number of functional groups including esters, nitriles, secondary amides, carbamates, sulfoxides, sulfones, sulfonyl fluorides, halogens, aryl-nitro groups, and arylamines. The conditions reported are the mildest to date and utilize EtOAc, a preferred solvent given its excellent safety profile and lower environmental impact. The ease of setup and broad chemoselectivity make this method attractive for organic synthesis, and the results further demonstrate the utility of DPDS as a selective reducing agent.
Continuous Flow Acylation of (Hetero)aryllithiums with Polyfunctional N,N-Dimethylamides and Tetramethylurea in Toluene
Djukanovic, Dimitrije,Filipponi, Paolo,Heinz, Benjamin,Knochel, Paul,Mandrelli, Francesca,Martin, Benjamin,Mostarda, Serena
supporting information, p. 13977 - 13981 (2021/09/13)
The continuous flow reaction of various aryl or heteroaryl bromides in toluene in the presence of THF (1.0 equiv) with sec-BuLi (1.1 equiv) provided at 25 °C within 40 sec the corresponding aryllithiums which were acylated with various functionalized N,N-
Palladium-Catalyzed Aminocarbonylation of Aryl Halides with N,N-Dialkylformamide Acetals
Hirata, Shuichi,Osako, Takao,Uozumi, Yasuhiro
, (2021/10/05)
We developed a protocol for the palladium-catalyzed aminocarbonylation of aryl halides using less-toxic formamide acetals as bench-stable aminocarbonyl sources under neutral conditions. Various aryl (including heteroaryl) halides reacted with N,N-dialkylformamide acetals in the presence of a catalytic amount of tris(dibenzylideneacetone)dipalladium(0)-chloroform adduct and xantphos to give the corresponding aromatic carboxamides at 90–140 °C without any activating agents or bases in up to quantitative chemical yield. This protocol was applied to aryl bromides, aryl iodides, and trifluoromethanesulfonic acid, as well as to relatively less-reactive aryl chlorides. A wide range of functionalities on the aromatic ring of the substrates were tolerated under the aminocarbonylation conditions. The catalytic aminocarbonylation was used to prepare the insect repellent N,N-diethyl-3-methylbenzamide as well as a synthetic intermediate of the dihydrofolate reductase inhibitor triazinate.
Ni-Catalyzed Reductive Cyanation of Aryl Halides and Phenol Derivatives via Transnitrilation
Mills, L. Reginald,Graham, Joshua M.,Patel, Purvish,Rousseaux, Sophie A. L.
supporting information, p. 19257 - 19262 (2019/12/02)
Herein, we report a Ni-catalyzed reductive coupling for the synthesis of benzonitriles from aryl (pseudo)halides and an electrophilic cyanating reagent, 2-methyl-2-phenyl malononitrile (MPMN). MPMN is a bench-stable, carbon-bound electrophilic CN reagent that does not release cyanide under the reaction conditions. A variety of medicinally relevant benzonitriles can be made in good yields. Addition of NaBr to the reaction mixture allows for the use of more challenging aryl electrophiles such as aryl chlorides, tosylates, and triflates. Mechanistic investigations suggest that NaBr plays a role in facilitating oxidative addition with these substrates.
POCl3 promoted metal-free synthesis of tertiary amides by coupling of carboxylic acids and N,N-disubstituted formamides
Bi, Xiaojing,Li, Junchen,Shi, Enxue,Li, Yu,Liu, Ying,Wang, Hongmei,Xiao, Junhua
supporting information, p. 236 - 240 (2019/04/25)
Herein we report a robust and synthetically useful catalyst-free amination methodology by the coupling of carboxylic acids and N-substituted formamides using POCl3 as a promoter. Versatile amides with a wide array of substituent groups were prepared within only 1 h in good to excellent yields. And even multi-substituted aromatic carboxylic acids could give the desired products with satisfactory results.
Facile Access to Amides from Oxygenated or Unsaturated Organic Compounds by Metal Oxide Nanocatalysts Derived from Single-Source Molecular Precursors
Mohammad, Akbar,Chandra, Prakash,Ghosh, Topi,Carraro, Mauro,Mobin, Shaikh M.
, p. 10596 - 10608 (2017/09/12)
Oxidative amidation is a valuable process for the transformation of oxygenated organic compounds to valuable amides. However, the reaction is severely limited by the use of an expensive catalyst and limited substrate scope. To circumvent these limitations, designing a transition-metal-based nanocatalyst via more straightforward and economical methodology with superior catalytic performances with broad substrate scope is desirable. To resolve the aforementioned issues, we report a facile method for the synthesis of nanocatalysts NiO and CuO by the sol-gel-assisted thermal decomposition of complexes [Ni(hep-H)(H2O)4]SO4 (SSMP-1) and [Cu(μ-hep)(BA)]2 (SSMP-2) [hep-H = 2-(2-hydroxylethyl)pyridine; BA = benzoic acid] as single-source molecular precursors (SSMPs) for the oxidative amidation of benzyl alcohol, benzaldehyde, and BA by using N,N-dimethylformamide (DMF) as the solvent and as an amine source, in the presence of tert-butylhydroperoxide (TBHP) as the oxidant, at T = 80 °C. In addition to nanocatalysts NiO and CuO, our previously reported Co/CoO nanocatalyst (CoNC), derived from the complex [CoII(hep-H)(H2O)4]SO4 (A) as an SSMP, was also explored for the aforementioned reaction. Also, we have carefully investigated the difference in the catalytic performance of Co-, Ni-, and Cu-based nanoparticles synthesized from the SSMP for the conversion of various oxygenated and unsaturated organic compounds to their respective amides. Among all, CuO showed an optimum catalytic performance for the oxidative amidation of various oxygenated and unsaturated organic compounds with a broad reaction scope. Finally, CuO can be recovered unaltered and reused for several (six times) recycles without any loss in catalytic activity.
Pd(PPh3)4 catalyzed amide compound synthesis method
-
Paragraph 0051; 0052; 0053; 0054; 0055, (2017/12/27)
The invention relates to a Pd(PPh3)4 catalyzed amide compound synthesis method. The synthesis method takes carboxylic acid as the substrate, and adopts N-substituted formamide as the amine source to synthesize an amide compound under the catalysis of Pd(PPh3)4. The method is widely applicable to substrates with different functional groups. The amide compound efficiently constructed by the invention is an important skeleton of many organic molecules, drugs, peptides, bioactive molecules and natural products. The synthesis method provided by the invention provides a widely applicable preparation method for synthesis of the compounds.
Synthesis method of amide aryl compound
-
Paragraph 0070; 0071; 0072; 0073; 0074, (2017/04/19)
The invention relates to a synthesis method of an amide aryl compounds. According to the method, Ru-(p-cymene) C12 is taken as a catalyst, K2S2O8 is taken as an oxidizing agent, Xantphos is taken as a ligand, one reactant (N, N-dialkyl formamide) is taken
A use of the carboxamides aryl carbonyl aminolysis method of preparing amide
-
Paragraph 0030; 0032-0035, (2016/10/10)
The invention discloses a method for preparing amides via a decarbonylation ammonolysis reaction of aryl ester and formamide. The method comprises the following steps: dissolving a palladium catalyst, aryl ester and formamide in a solvent, and stirring fo
