35480-25-2

Upstream product

• 578-58-5 2-methylmethoxybenzene 
• 64-19-7 acetic acid 
• 612-16-8 (2-methoxyphenyl)methanol 
• 75-36-5 acetyl chloride 
• 108-24-7 acetic anhydride 
• 141-78-6 ethyl acetate 
• 195064-77-8 2-methoxybenzyl trimethylsilyl ether 
• 90-02-8 salicylaldehyde 
• 108-05-4 vinyl acetate 
• 67-56-1 methanol 
• 64-17-5 ethanol 
• 135-02-4 ortho-anisaldehyde 
• 93-25-4 2-methoxyphenylacetic acid 
• 142-71-2 copper diacetate 

Downstream Products

• 130436-69-0 [2-(2-Methoxy-phenyl)-ethoxy]-trimethyl-silane 
• 612-16-8 (2-methoxyphenyl)methanol 
• 5819-93-2 2,2'-dimethoxydiphenylmethane 
• 30567-87-4 2,4'-dimethoxydiphenylmethane 

Relevant academic research and scientific papers

Synthesis, Characterisation, and Determination of Physical Properties of New Two-Protonic Acid Ionic Liquid and its Catalytic Application in the Esterification

A new ionic liquid was synthesised, and its chemical structure was elucidated by FT-IR, 1D NMR, 2D NMR, and mass analyses. Some physical properties, thermal behaviour, and thermal stability of this ionic liquid were investigated. The formation of a two-protonic acid salt namely 4,4′-trimethylene-N,N′-dipiperidinium sulfate instead of 4,4′-trimethylene-N,N′-dipiperidinium hydrogensulfate was evidenced by NMR analyses. The catalytic activity of this ionic liquid was demonstrated in the esterification reaction of n-butanol and glacial acetic acid under different conditions. The desired acetate was obtained in 62-88 % yield without using a Dean-Stark apparatus under optimal conditions of 10 mol-% of the ionic liquid, an alcohol to glacial acetic acid mole ratio of 1.3: 1.0, a temperature of 75-100°C, and a reaction time of 4 h. α-Tocopherol (α-TCP), a highly efficient form of vitamin E, was also treated with glacial acetic acid in the presence of the ionic liquid, and O-acetyl-α-tocopherol (Ac-TCP) was obtained in 88.4 % yield. The separation of esters was conducted during workup without the utilisation of high-cost column chromatography. The residue and ionic liquid were used in subsequent runs after the extraction of desired products. The ionic liquid exhibited high catalytic activity even after five runs with no significant change in its chemical structure and catalytic efficiency.

4-Imidazol-1-yl-butane-1-sulfonic acid ionic liquid: Synthesis, structural analysis, physical properties and catalytic application as dual solvent-catalyst

4-Imidazol-1-yl-butane-1-sulfonic acid (ImBu-SO3H) has been successfully synthetized and fully characterized by FT-IR and high-resolution NMR spectroscopy (1H, 13C). The “plausible” alternative structures of ImBu-SO3H were discussed on the basis of its NMR data. The ionic liquid showed interesting dual solvent-catalyst property, which was studied experimentally for the acetylation of a variety of functionalized alcohols, phenols, thiols, amines and α-tocopherol (α-CTP) as the most active form of vitamin E with acetic anhydride and which provided good yields within a short reaction time. ImBu-SO3H was successfully recycled by product extraction with an average recovered yield of 82% for 5 subsequent runs. The catalytic activity of the recycled ImBu-SO3H showed almost no loss even after five consecutive runs.

Decarboxylative Acetoxylation of Aliphatic Carboxylic Acids

Organic molecules bearing acetoxy moieties are important functionalities in natural products, drugs, and agricultural chemicals. Synthesis of such molecules via transition metal-catalyzed C-O bond formation can be achieved in the presence of a carefully chosen directing group to alleviate the challenges associated with regioselectivity. An alternative approach is to use ubiquitous carboxylic acids as starting materials and perform a decarboxylative coupling. Herein, we report conditions for a photocatalytic decarboxylative C-O bond formation reaction that provides rapid and facile access to the corresponding acetoxylated products. Mechanistic investigations suggest that the reaction operates via oxidation of the carboxylate followed by rapid decarboxylation and oxidation by Cu(OAc)2

Cycloaddition of CO2 with epoxides and esterification reactions using the porous redox catalyst Co-POM@MIL-101(Cr)

The catalytic activity of the recently reported Co-POM@MIL-101(Cr) composite, synthesized from K5[CoW12O40] (Co-POM) and chromium(iii) terephthalate (MIL-101), was studied in the solvent-free cycloaddition of CO2 with epoxides and esterification of acetic acid with various alcohols. The materials containing varying amounts of Co-POM were synthesized using a one-pot HF-free method in a "bottle around ship" strategy. The material was thoroughly characterized using several methods such as powder X-ray diffraction (PXRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and electron paramagnetic resonance spectroscopy (EPR). Temperature programmed desorption (TPD) of NH3 and CO2, and the CO2 adsorption capacity (adsorption isotherms) were used to study the acid-base properties of the materials. The combination of the electron-transfer character of Co(iii)-POM and ordered mesopores in MIL-101(Cr) creates an efficient catalytic system with mild conditions (90 °C and 20 bar CO2 pressure) for solvent-free cycloaddition of CO2 to various epoxides. Esterification of acetic acid with alcohols was also carried out using the Co-POM@MIL-101 catalysts and high yields were achieved for different alcohols. The catalysis experiments also clearly show that the active site in this heterogeneous catalyst is the Co(iii) center in the Keggin anion structure. It presumably conducts both the cycloaddition of CO2 to epoxides and the esterification reaction via an outer-sphere electron transfer mechanism using the Co(iii)/Co(ii) redox pair. The heterogeneous Co-POM@MIL-101 catalysts were separated by simple filtration and reused five times in the cycloaddition of CO2 with styrene epoxide and seven times for the esterification of acetic acid with benzyl alcohol with negligible leaching of Co-POM and no considerable loss of activity.

Catalytic Cascade Access to Biaryl-2-Methyl Acetates from Pyruvate O-Arylmethyl Ketoximes via the Palladium-Catalyzed C(sp2)H Bond Arylation and C?O Bond Solvolysis

A catalytic cascade has been developed for the synthesis of biaryl-2-methyl acetates via a palladium-catalyzed ortho-C(sp2)?H bond arylation of pyruvate O-arylmethyl ketoximes with aryl iodides followed by a solvolysis, in which the pyruvic ketoxime ester as a new auxiliary is employed to direct the C(sp2)?H bond activation. The straightforward treatment of O-arylmethyl hydroxylamines and ethyl pyruvate with aryl iodides also provides the target products in a one-pot fashion. Furthermore, the new palladacycle intermediate is unambiguously confirmed by single-crystal X-ray diffraction analysis. A plausible reaction pathway is proposed for the Pd-catalyzed arylation-acetolysis sequence. (Figure presented.).

Oxidative "reverse-esterification" of ethanol with benzyl/alkyl alcohols or aldehydes catalyzed by supported rhodium nanoparticles

A very unusual role of polystyrene stabilized rhodium (Rh@PS) nanoparticles as a supported catalyst is described for "reverse-esterification" of ethanol with benzyl/alkyl alcohols or aldehydes. Faster and selective oxidation of ethanol to acetaldehyde and H2 under Rh@PS catalyzed conditions which restricted further oxidation of benzyl/alkyl alcohols and their in situ reaction gave the corresponding acetate esters following the dehydrogenative-coupling approach. A hitherto redox dehydrogenative-coupling of ethanol and aldehydes has also been explored for the same acetate ester synthesis under Rh@PS catalyzed conditions.

Highly efficient and recyclable acetylation of phenols and alcohols by nickel zirconium phosphate under solvent-free conditions

Nickel zirconium phosphate nanoparticles have been used as an efficient catalyst for the acetylation of a wide range of alcohols and phenols with acetic anhydride in good to excellent yields under solvent-free conditions. The steric and electronic properties of the different substrates had a significant influence on the reaction conditions required to achieve the acetylation. The catalyst used in the current study was characterized by inductively coupled plasma optical emission spectroscopy, X-ray diffraction, N2 adsorption-desorption, scanning electron microscopy, and transmission electron microscopy. This nanocatalyst could also be recovered and reused at least six times without any discernible decrease in its catalytic activity.

Selective acetylation of primary alcohols by ethyl acetate

A KOtBu and ethyl acetate mediated efficient methodology has been developed for the acetylation of primary and secondary alcohols where ethyl acetate is the source of acetyl group. The reaction is fast, mild, efficient, and highly selective towards the primary alcohols.

Synthesis of lipase nano-bio-conjugates as an efficient biocatalyst: Characterization and activity-stability studies with potential biocatalytic applications

In the present study, we have synthesized lipase-nano-bio-conjugates via immobilization of various lipases on multiwall carbon nano-tubes (MCNT), in order to construct an efficient and recyclable biocatalytic system. In a screening study lipase Pseudomonas fluorescens (PFL) acted as an efficient biocatalyst (lipase-nano-bio-conjugates) which showed higher retention of lipase activity and protein loading. Consequently the immobilization support : lipase (MCNT : PFL) composition was screened in which MCNT : PFL (2 : 1) was calculated as a robust biocatalyst composition which showed higher activity retention and protein loading. This nano-bio-conjugate was then characterized in detail with physical and biochemical techniques using SEM, TEM, FTIR, Km, Vmax, catalytic efficiency and (%) water content analysis. This developed biocatalyst was further used for practical biocatalytic applications such as O-acylation reactions. Various reaction parameters were optimized in detail like reactant molar ratio (2 : 3.5), solvent, MCNT : PFL biocatalyst amount (36 mg), temperature (50°C) etc. The developed biocatalytic protocol was then extended to synthesize several (twenty-two) industrially important acylated moieties with an excellent yield, these products are well characterized by 1HNMR, 13CNMR and GCMS analysis. Moreover in the present study, we have reviewed the potential industrial applications of various synthesized compounds. Also, we have studied the thermodynamic aspect which demonstrated more feasibility of use of immobilized MCNT : PFL lipase over free lipase. Interestingly, immobilized MCNT : PFL lipase showed 2.3 fold higher catalytic activity than free PFL. Besides this, the biocatalyst was efficiently recycled for up to five cycles. Thus the present protocol demonstrated, (i) synthesis of nano-bio-conjugates as a bio-catalyst, (ii) detailed physical-biochemical characterization of nano-bio-conjugates, (iii) optimization of the biocatalytic protocol (iv) practical biocatalytic applications along with a mechanistic study (v) a thermodynamic feasibility study and (vi) recyclability study. 2015

Acetylation of alcohols and phenols under solvent-free conditions using iron zirconium phosphate

Iron zirconium phosphate (ZPFe) nanoparticles were found to function as an efficient catalyst for the acetylation of a wide range of alcohols and phenols using acetic anhydride, generating good to excellent yields under solvent-free conditions. The steric and electronic properties of various substrates had a significant influence on the reaction conditions required to achieve the acetylation. The catalyst used in the current study was characterized by inductively coupled plasma-optical emission spectrometry, X-ray diffraction, N2 adsorption-desorption, scanning electron microscopy, and transmission electron microscopy. These analyses revealed that the interlayer distance in the catalyst increased from 7.5 to 9.3 ? when Fe3+ was intercalated between the layers, whereas the crystallinity of the material was reduced. This nanocatalyst could also be recovered and reused at least six times without any discernible decrease in its catalytic activity. This new method for the acetylation of alcohols and phenols has several important advantages, including mild and environmentally friendly reaction conditions, as well as good to excellent yields and a facile work-up.