370-77-4Relevant academic research and scientific papers
Copper(i)-catalysed intramolecular hydroarylation-redox cross-dehydrogenative coupling ofN-propargylanilines with phosphites
Li, Guangzhe,Yu, Guo,Wang, Chengdong,Morita, Taiki,Zhang, Xuhai,Nakamura, Hiroyuki
supporting information, p. 113 - 116 (2021/12/29)
Intramolecular hydroarylation-redox cross-dehydrogenative coupling ofN-propargylanilines with phosphite diesters proceeded in the presence of Cu(i)-catalysts (20 mol%) to selectively give 2-phosphono-1,2,3,4-tetrahydroquinolines in good yields with 100% atomic utilization. P-H and two C-H bonds are activated at once and these hydrogen atoms are trapped by a propargylic triple bond in the molecule.
BF3·Et2O as a metal-free catalyst for direct reductive amination of aldehydes with amines using formic acid as a reductant
Fan, Qing-Hua,Liu, Xintong,Luo, Zhenli,Pan, Yixiao,Xu, Lijin,Yang, Ji,Yao, Zhen,Zhang, Xin
supporting information, p. 5205 - 5211 (2021/07/29)
A versatile metal- and base-free direct reductive amination of aldehydes with amines using formic acid as a reductant under the catalysis of inexpensive BF3·Et2O has been developed. A wide range of primary and secondary amines and diversely substituted aldehydes are compatible with this transformation, allowing facile access to various secondary and tertiary amines in high yields with wide functional group tolerance. Moreover, the method is convenient for the late-stage functionalization of bioactive compounds and preparation of commercialized drug molecules and biologically relevant N-heterocycles. The procedure has the advantages of simple operation and workup and easy scale-up, and does not require dry conditions, an inert atmosphere or a water scavenger. Mechanistic studies reveal the involvement of imine activation by BF3and hydride transfer from formic acid.
Sulfated polyborate: A dual catalyst for the reductive amination of aldehydes and ketones by NaBH4
Ganwir, Prerna,Chaturbhuj, Ganesh
, (2021/05/19)
An efficient, quick, and environment-friendly one-pot reductive amination of aldehydes or ketones was developed. In ethanol at 70 °C, a imination catalyzed by sulfated polyborate and further reduced by sodium borohydride yields various amines. The present method has many significant benefits, including a shorter reaction time, excellent yields, and a hassle-free, straightforward experimental process. The reaction has a wide range of applications due to its flexibility, including secondary amine for reductive amination.
Palladium supported on magnesium hydroxyl fluoride: An effective acid catalyst for the hydrogenation of imines and N-heterocycles
Agbossou-Niedercorn, Francine,Corre, Yann,Dongare, Mohan K.,Kemnitz, Erhard,Kokane, Reshma,Michon, Christophe,Umbarkar, Shubhangi B.
supporting information, p. 19572 - 19583 (2021/11/04)
Palladium catalysts supported on acidic fluorinated magnesium hydroxide Pd/MgF2-x(OH)x were prepared through precipitation or impregnation methods. Applications to the hydrogenation of various aldimines and ketimines resulted in good catalytic activities at mild temperatures using one atmosphere of hydrogen. Quinolines, pyridines and other N-heterocycles were successfully hydrogenated at higher temperature and hydrogen pressure using low palladium loadings and without the use of any acid additive. Such reactivity trend confirmed the positive effect of the Br?nsted and Lewis acid sites from the fluorinated magnesium hydroxide support resulting in the effective pre-activation of N-heterocycle substrates and therefore in the good catalytic activity of the palladium nanoparticles during the hydrogenations. As demonstrated in the hydrogenation of imines, the catalyst was recycled up to 10 times without either loss of activity or palladium leaching. This journal is
Cooperative catalysis of molybdenum with organocatalysts for distribution of products between amines and imines
Wu, Di,Bu, Qingqing,Guo, Cheng,Dai, Bin,Liu, Ning
, (2021/02/02)
Multi-amino groups and nitrogen donors compound was discovered as an organocatalyst for N-alkylation of alcohols with amines in the presence of Mo(CO)6. The Mo(CO)6/organocatalyst binary system has shown to be a highly active catalyst for the N-alkylation reaction between alcohols and amines with excellent tolerance of variable starting materials bearing different functional groups. Of particular note, this method possessing a superiority selectivity in the synthesis of N-alkylated amines or imines, which can be controlled by the reaction temperature. The cooperative catalysis mechanism in combination of Mo(CO)6 with organocatalyst was elucidated by control experiments.
Iron-catalyzed N-alkylation of aromatic amines via borrowing hydrogen strategy
Chen, Hui,Wang, Qingfu,Liu, Tingting,Chen, Haitao,Zhou, Duo,Qu, Fengbo
, p. 877 - 884 (2021/02/16)
Earth-abundant transition metals could be used as a noble metal replacement in catalysis not only for different catalytic reactivity but environmentally benign methodology. We report here on the iron-catalyzed synthesis of N-alkylated amines via borrowing hydrogen strategy and differently functionalized aniline derivatives are alkylated in good yields.
Effect of the ancillary ligand in N-heterocyclic carbene iridium(III) catalyzed N-alkylation of amines with alcohols
Feng, Xinshu,Huang, Ming
, (2021/06/21)
A series of air-stable N-heterocyclic carbene (NHC) Ir(III) complexes (Ir1-6), bearing various combinations of chlorine, pyridine and NHC ligands, were assayed for the N-alkylation of amines with alcohols. It was found that Ir3, with two monodentate 1,3-bis-methyl-imidazolylidene (IMe) ligands, emerged as the most active complex. A large variety of amines and primary alcohols were efficiently converted into mono-N-alkylated amines in 53–96% yields. As a special highlight, for the challenging MeOH, selective N-monomethylation could be achieved using KOH as a base under an air atmosphere. Moreover, this catalytic system was successfully applied to the gram-scale synthesis of some valuable compounds.
Synthesis of an Fe-Pd bimetallic catalyst for: N -alkylation of amines with alcohols via a hydrogen auto-transfer methodology
Wu, Peng-Yu,Lu, Guo-Ping,Cai, Chun
, p. 396 - 404 (2021/01/28)
Hydrogen auto-transfer (HAT) or borrowing hydrogen (BH) methodology which combines dehydrogenation, intermediate reaction and hydrogenation, is recognized as an excellent strategy for one-pot synthesis from an economic and environmental point of view. Although much effort has been made on the development of catalysts for HAT reactions, harsh conditions, external base or large amounts of noble metals are still required in most reported catalysis systems, and thus the exploration of a highly efficient and recyclable heterogeneous catalyst remains meaningful. In this work, a novel bimetallic catalyst, Fe10Pd1/NC500 derived from bimetallic MOF NH2-MIL-101(Fe10Pd1), has been prepared, and the catalyst exhibits superior catalytic performance for the N-alkylation of amines with alcohols via a hydrogen auto-transfer methodology. High yields of the desired products were achieved at 120 °C with an alcohol/amine molar ratio of 2?:?1 and required no external additive or solvent. A distinct enhancement in catalytic performance is observed when compared with monometallic catalysts, which can be ascribed to the "synergistic effects"inside the bimetallic alloys. The N-doped carbon support has been revealed to provide the necessary basicity which avoids the requirement of an external base. Moreover, a wide substrate range and remarkable reusability have been shown by Fe10Pd1/NC500, and this work highlights new possibilities for bimetallic catalysts applied in sustainable chemistry.
The synthesis and structure of an amazing and stable carbonized material Cu-PC@OFM and its catalytic applications in water with mechanism explorations
Tian, An-Qi,Luo, Xiang-Hao,Ren, Zhi-Lin,Zhao, Jun,Wang, Long
supporting information, p. 9614 - 9620 (2021/06/12)
An amazing and stable carbonized octahedral frame material Cu-PC@OFM was synthesized and characterized through HRTEM, SEM, XRD, XPS, and Raman spectroscopy and nitrogen adsorption/desorption analysis. In particular, the carbon matrix carrier loaded with nano-copper not only maintains the original structure, but also the nano copper particles generatedin situsignificantly improve the catalytic performance and stability. It was disclosed that the copper-based catalyst material Cu-PC@OFM showed high catalytic activity in the borrowing hydrogen reaction and the synthesis of 1-benzyl-2-aryl-1H-benzo[d]imidazole derivatives with high yields in water. This copper catalytic system provided a much greener and efficient catalyst for the synthesis of functionalized amines and 1-benzyl-2-aryl-1H-benzo[d]imidazoles with good recovery performance in water, which was the first example for the Cu-PC@OFM material-catalyzed synthesis of 1-benzyl-2-aryl-1H-benzo[d]imidazoles. In addition, a plausible reaction mechanism was proposed through some condition control experiments, deuterium labeling experiments and separation of intermediates experiments.
Biorenewable carbon-supported Ru catalyst for: N -alkylation of amines with alcohols and selective hydrogenation of nitroarenes
Goyal, Vishakha,Narani, Anand,Natte, Kishore,Poddar, Mukesh Kumar,Ray, Anjan,Sarki, Naina,Tripathi, Deependra
, p. 14687 - 14694 (2021/08/23)
Herein, we developed a renewable carbon-supported Ru catalyst (Ru/PNC-700), which was facilely prepared via simple impregnation followed by the pyrolysis process. The prepared Ru/PNC-700 catalyst demonstrated remarkable catalytic activity in terms of conversion and selectivity towards N-alkylation of anilines with benzyl alcohol and chemoselective hydrogenation of aromatic nitro compounds. In addition, local anesthetic pharmaceutical agents (e.g., butamben and benzocaine), including key drug intermediates, were synthesized in excellent yields under mild conditions and in the presence of water as a green solvent. Moreover, the prepared Ru/PNC-700 catalyst could be easily recovered and reused up to five times without any apparent loss in activity and selectivity.
