3783-65-1Relevant academic research and scientific papers
Excited-state energy levels and photophysics of a short polyene 2-(4-phenyl-1,3-butadien-1-yl)thiophene
Itoh, Takao
, p. 40 - 46 (2016)
Emission, excitation and absorption spectra of a new and short polyene, 2-(4-phenyl-1,3-butadien-1-yl)thiophene (PBT), have been measured under different conditions by varying temperature and solvent and in the vapor phase, along with those of 2-(2-phenyl
Heterobimetallic Pd/Mn and Pd/Co complexes as efficient and stereoselective catalysts for sequential Cu-free Sonogashira coupling–alkyne semi-hydrogenation reactions
Baweja, Saral,Clauss, Reike,Gelman, Dmitri,Hey-Hawkins, Evamarie
, p. 1344 - 1356 (2022/02/03)
A series of heterobimetallic PdII/MII complexes (MII = Mn, Co) were synthesised and tested as precatalysts for sequential Sonogashira coupling–alkyne semi-hydrogenation reactions to form Z-aryl alkenes. The carbometalated heterobimetallic PdII/CoII complex CoPdL3′ demonstrated an apparent cooperative effect compared to the corresponding monometallic counterparts. This compound was identified as a potent single-molecule catalyst for the one-pot Cu-free Sonogashira coupling of aryl bromides with terminal alkynes followed by chemo- and stereoselective semi-hydrogenation of the alkyne intermediate using NH3·BH3 as a hydrogen source. Furthermore, different aromatic substrates have been tested to show the generality of the reaction for the synthesis of Z-alkenes, including biologically active combretastatin A-4. In addition, the homogeneous nature of the catalytically active species was demonstrated.
Electrochemical Aziridination of Internal Alkenes with Primary Amines
Bartolomeu, Aloisio de A.,Dyga, Marco,Goo?en, Lukas J.,Laudadio, Gabriele,No?l, Timothy,O?eka, Maksim,de Bruin, Bas,de Oliveira, Kleber T.,van Leest, Nicolaas P.
supporting information, p. 255 - 266 (2021/01/19)
An electrochemical approach to prepare aziridines via an oxidative coupling between alkenes and primary alkyl amines was realized. The reaction is carried out in an electrochemical flow reactor, leading to short reaction/residence times (5 min), high yields, and broad scope. At the cathode, hydrogen is generated, which can be used in a second reactor to reduce the aziridine yielding the corresponding hydroaminated product.Aziridines are useful synthetic building blocks, widely employed for the preparation of various nitrogen-containing derivatives. As the current methods require the use of prefunctionalized amines, the development of a synthetic strategy toward aziridines that can establish the union of alkenes and amines would be of great synthetic value. Herein, we report an electrochemical approach, which realizes this concept via an oxidative coupling between alkenes and primary alkylamines. The reaction is carried out in an electrochemical flow reactor leading to short reaction/residence times (5 min), high yields, and broad scope. At the cathode, hydrogen is generated, which can be used in a second reactor to reduce the aziridine, yielding the corresponding hydroaminated product. Mechanistic investigations and DFT calculations revealed that the alkene is first anodically oxidized and subsequently reacted with the amine coupling partner.The central tenet in modern synthetic methodology is to develop new methods only using widely available organic building blocks. As a direct consequence, new activation strategies are required to cajole the coupling partners to react and, subsequently, forge new and useful chemical bonds. Using electrochemical activation, our methodology enables for the first time the direct coupling between olefins and amines to yield aziridines. Aziridines display interesting pharmacological activity and serve as valuable synthetic intermediates to prepare diverse nitrogen-containing derivatives. Interestingly, the sole byproduct generated in this process is hydrogen, which can be subsequently used to reduce the aziridine into the corresponding hydroaminated product. Hence, this electrochemical methodology can be regarded as green and sustainable from the vantage point of upgrading simple and widely available commodity chemicals.
Antiradical Properties of trans-2-(4-substituted-styryl)-thiophene
Gusain, Anamika,Kumar, Naresh,Kumar, Jagdeep,Pandey, Gunjan,Hota, Prasanta Kumar
, p. 51 - 61 (2020/10/19)
2-substituted thiophene compounds with electron donating and electron withdrawing p-phenyl substitution were synthesized and studied their radical scavenging properties using DPPH assay and DFT method. It is shown that p-hydroxy and p-amino phenyl substit
A Solid-Phase Assisted Flow Approach to In Situ Wittig-Type Olefination Coupling
Aldrich-Wright, Janice R.,Dankers, Christian,Gordon, Christopher P.,Polyzos, Anastasios,Tadros, Joseph
supporting information, p. 4184 - 4194 (2021/08/24)
Described herein is the development of a continuous flow, solid-phase triphenylphosphine (PS-PPh3) assisted protocol to facilitate the in situ coupling of reciprocal pairs of halogen and carbonyl functionalised molecular pairs by a Wittig olefination within 15 mins. The protocol entails injecting a single solution (1 : 1 CHCl3 : EtOH) containing the halogenated and carbonyl-based substrates into a continuously flowing stream of CHCl3 : EtOH (1 : 1), passed through a fixed bed of K2CO3 and PS-PPh3. With advancement to the previous PS-PPh3 coupling procedures, the method employs a traditional polystyrene-based immobilisation matrix, the substrate scope of the protocol extended to substituted ketones, secondary alkyl chlorides, and an unprotected maleimide scaffold.
Ruthenium-Catalyzed E-Selective Partial Hydrogenation of Alkynes under Transfer-Hydrogenation Conditions using Paraformaldehyde as Hydrogen Source
Fetzer, Marcus N. A.,Tavakoli, Ghazal,Klein, Axel,Prechtl, Martin H. G.
, p. 1317 - 1325 (2021/02/11)
E-alkenes were synthesized with up to 100 % E/Z selectivity via ruthenium-catalyzed partial hydrogenation of different aliphatic and aromatic alkynes under transfer-hydrogenation conditions. Paraformaldehyde as a safe, cheap and easily available solid hydrogen carrier was used for the first time as hydrogen source in the presence of water for transfer-hydrogenation of alkynes. Optimization reactions showed the best results for the commercially available binuclear [Ru(p-cymene)Cl2]2 complex as pre-catalyst in combination with 2,2-bis(diphenylphosphino)-1,1-binaphthyl (BINAP) as ligand (1 : 1 ratio per Ru monomer to ligand). Mechanistic investigations showed that the origin of E-selectivity in this reaction is the fast Z to E isomerization of the formed alkenes. Mild reaction conditions plus the use of cheap, easily available and safe materials as well as simple setup and inexpensive catalyst turn this protocol into a feasible and promising stereo complementary procedure to the well-known Z-selective Lindlar reduction in late-stage syntheses. This procedure can also be used for the production of deuterated alkenes simply using d2-paraformaldehyde and D2O mixtures.
A photocatalyst-free visible-light-mediated solvent-switchable route to stilbenes/vinyl sulfones from β-nitrostyrenes and arylazo sulfones
Chawla, Ruchi,Dutta, P. K.,Jaiswal, Shefali,Yadav, Lal Dhar S.
supporting information, p. 6487 - 6492 (2021/08/03)
Photocatalyst-free visible-light-mediated reactions, based on the presence of a visible-light-absorbing functional group in the starting material itself in order to exclude the often costly, hazardous, degradable and difficult to remove or recover photoredox catalysts, have been gaining momentum recently. We have employed this approach to develop a denitrative photocatalyst-free visible-light-mediated protocol for the arylation/sulfonylation of β-nitrostyrenes employing arylazo sulfones (bench-stable photolabile compounds) in a switchable solvent-controlled manner. Arylazo sulfones served as the aryl and sulfonyl radical precursors under blue LED irradiation for the synthesis oftrans-stilbenes and (E)-vinyl sulfones in CH3CN and dioxane/H2O 2?:?1, respectively. The absence of any metal, photocatalyst and additive; excellent selectivity (E-stereochemistry) and solvent-switchability; and the use of visible light and ambient temperature are the prime assets of the developed method. Moreover, we report the first photocatalyst-free visible light-driven route to synthesize stilbenes and vinyl sulfones from readily available β-nitrostyrenes.
Tandem Acceptorless Dehydrogenative Coupling-Decyanation under Nickel Catalysis
Babu, Reshma,Balaraman, Ekambaram,Midya, Siba P.,Subaramanian, Murugan,Yadav, Vinita
, p. 7552 - 7562 (2021/06/28)
The development of new catalytic processes based on abundantly available starting materials by cheap metals is always a fascinating task and marks an important transition in the chemical industry. Herein, a nickel-catalyzed acceptorless dehydrogenative coupling of alcohols with nitriles followed by decyanation of nitriles to access diversely substituted olefins is reported. This unprecedented C=C bond-forming methodology takes place in a tandem manner with the formation of formamide as a sole byproduct. The significant advantages of this strategy are the low-cost nickel catalyst, good functional group compatibility (ether, thioether, halo, cyano, ester, amino, N/O/S heterocycles; 43 examples), synthetic convenience, and high reaction selectivity and efficiency.
Palladium Loaded Dendronized Polymer as Efficient Polymeric Sustainable Catalyst for Heck Coupling Reaction
Hiba, K.,Krishna, G. Anjali,Prathapan, S.,Sreekumar, K.
, (2021/08/18)
The palladium incorporated amine-functionalized dendronized polymer was synthesized by the addition of palladium acetate to dendronized polymer in methanol at room temperature. Palladium species are immobilized onto the dendritic structure by their coordination with amino functional groups. The newly developed dendritic system showed high palladium content in the low generation level itself, which was found to be 4.19?mmol/g. This was fairly higher than, the other palladium-based catalysts. Energy dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy, UV–Visible spectroscopy, and X-ray photoelectron spectroscopy were used to confirm the successful synthesis of the new catalyst. It was used as a homogeneous palladium catalyst for Heck coupling reaction between olefins and differently substituted aryl halides and the products were isolated in high yield. The products isolated were in trans configuration, which indicated the selectivity of the newly developed catalytic system. Also, this catalyst system was reused up to nine times without a significant decrease in its catalytic activity. The easy accessibility of catalytic sites, stability, resistance to metal leaching, high catalytic activity and remarkable stereoselectivity with a low amount of catalyst are all due to the dendritic support. The docking study was carried out for all the stilbene derivatives obtained by the Heck coupling reaction against DprE1 protein to study its potential antitubercular activity. All the compounds displayed superior docking score values over the range ??6.5 to ??8.2?kcal/mol, compared to the standard drug isoniazid with docking score of ??6.1?kcal/mol against DprE1. Graphic Abstract: [Figure not available: see fulltext.]
N-Heterocyclic carbene palladium (II)-pyridine (NHC-Pd (II)-Py) complex catalyzed heck reactions
Li, Dan,Tian, Qingqiang,Wang, Xuetong,Wang, Qiang,Wang, Yin,Liao, Siwei,Xu, Ping,Huang, Xin,Yuan, Jianyong
supporting information, p. 2041 - 2052 (2021/05/25)
A mild, efficient, and practical catalytic system for the synthesis of highly privileged stilbene pharmacophores is reported. This system uses N-heterocyclic carbene palladium (II) Pyridine (NHC-Pd (II)-Py) complex to catalyze the formation of carbon-carbon bonds between olefin derivatives and various bromide. This simple, gentle and user-friendly method can offer a variety of stilbene products in excellent yields under solvent-free condition. And its scale-up reaction has excellent yield and this system can be applied to industrial fields. The utility of this method is highlighted by its universality and modular synthesis of a series of bioactive molecules or important medical intermediates.
