Welcome to LookChem.com Sign In|Join Free
  • or
3-Buten-2-one, 4-cyclohexyl-, (3E)- is a chemical with a specific purpose. Lookchem provides you with multiple data and supplier information of this chemical.

41437-84-7

Post Buying Request

41437-84-7 Suppliers

Recommended suppliers

  • Product
  • FOB Price
  • Min.Order
  • Supply Ability
  • Supplier
  • Contact Supplier

41437-84-7 Usage

Check Digit Verification of cas no

The CAS Registry Mumber 41437-84-7 includes 8 digits separated into 3 groups by hyphens. The first part of the number,starting from the left, has 5 digits, 4,1,4,3 and 7 respectively; the second part has 2 digits, 8 and 4 respectively.
Calculate Digit Verification of CAS Registry Number 41437-84:
(7*4)+(6*1)+(5*4)+(4*3)+(3*7)+(2*8)+(1*4)=107
107 % 10 = 7
So 41437-84-7 is a valid CAS Registry Number.

41437-84-7Relevant academic research and scientific papers

A Heck reaction/photochemical alkene isomerization sequence to prepare functionalized quinolines

Donohoe, Timothy J.,Hoff, Oskar,Hoffman, Jack B.,Kelly, Alex,Walker, Johannes C. L.,Werrel, Simon

, (2020/08/06)

A route to prepare functionalized quinolines based on a Heck reaction/UV-induced alkene isomerization sequence is described. The method allows for the preparation of quinolines under mild and neutral conditions and has broad functional group tolerance. Acid-sensitive functional groups that would not be tolerated under previous approaches can be included and a one-pot quinoline forming procedure is also reported.

Catalytic Enantioselective Conjugate Addition of Stereodefined Di- and Trisubstituted Alkenylaluminum Compounds to Acyclic Enones

McGrath, Kevin P.,Hubbell, Aran K.,Zhou, Yuebiao,Santos, Damián Padín,Torker, Sebastian,Romiti, Filippo,Hoveyda, Amir H.

supporting information, p. 370 - 375 (2019/12/24)

Catalytic enantioselective conjugate addition (ECA) reactions with readily accessible and stereochemically defined E-, Z-, di- and trisubstituted alkenyl aluminum compounds are disclosed. Transformations are promoted by various NHC-copper catalysts (NHC=N-heterocyclic carbene), which are derived from enantiomerically pure sulfonate imidazolinium salts. The desired products were obtained in up to 89% yield and >99:1 e.r.; the alkenyl moiety was transferred with complete retention of its stereochemical identity in all instances. The scope and limitations of the approach, key mechanistic attributes, and representative functionalization are presented as well. (Figure presented.).

Cationic Co(I)-intermediates for hydrofunctionalization reactions: Regio- A nd enantioselective cobalt-catalyzed 1,2-hydroboration of 1,3-dienes

Duvvuri, Krishnaja,Dewese, Kendra R.,Parsutkar, Mahesh M.,Jing, Stanley M.,Mehta, Milauni M.,Gallucci, Judith C.,Rajanbabu

supporting information, p. 7365 - 7375 (2019/05/16)

Much of the recent work on catalytic hydroboration of alkenes has focused on simple alkenes and styrene derivatives with few examples of reactions of 1,3-dienes, which have been reported to undergo mostly 1,4-additions to give allylic boronates. We find that reduced cobalt catalysts generated from 1,n-bis-diphenylphosphinoalkane complexes [Ph2P-(CH2)n-PPh2]CoX2; n = 1-5) or from (2-oxazolinyl)phenyldiarylphosphine complexes [(G-PHOX)CoX2] (G = 4-substituent on oxazoline ring) effect selective 1,2-, 1,4-, or 4,3-additions of pinacolborane (HBPin) to a variety of 1,3-dienes depending on the ligands chosen. Conditions have been found to optimize the 1,2-additions. The reactive catalysts can be generated from the cobalt(II)-complexes using trimethylaluminum, methyl aluminoxane, or activated zinc in the presence of sodium tetrakis[(3,5-trifluoromethyl)phenyl]borate (NaBARF). The complex, (dppp)CoCl2, gives the best results (ratio of 1,2-to 1,4-addition >95:5) for a variety of linear terminal 1,3-dienes and 2-substituted 1,3-dienes. The [(PHOX)CoX2] (X = Cl, Br) complexes give mostly 1,4-addition with linear unsubstituted 1,3-dienes, but, surprisingly, selective 1,2-additions with 2-substituted or 2,3-disubstituted 1,3-dienes. Isolated and fully characterized (X-ray crystallography) Co(I)-complexes, (dppp)3Co2Cl2 and [(S,S)-BDPP]3Co2Cl2, do not catalyze the reaction unless activated by a Lewis acid or NaBARF, suggesting a key role for a cationic Co(I) species in the catalytic cycle. Regio- A nd enantioselective 1,2-hydroborations of 2-substituted 1,3-dienes are best accomplished using a catalyst prepared via activation of a chiral phosphinooxazoline-cobalt(II) complex with zinc and NaBARF. A number of common functional groups, among them,-OBn,-OTBS,-OTs, N-phthalimido-groups, are tolerated, and er's > 95:5 are obtained for several dienes including 1-alkenylcycloalk-1-enes. This operationally simple reaction expands the realm of asymmetric hydroboration to provide direct access to a number of nearly enantiopure homoallylic boronates, which are not readily accessible by current methods. The resulting boronates have been converted into the corresponding alcohols, potassium trifluororoborate salts, N-BOC amines, and aryl derivatives by C-BPin to C-aryl transformation.

Determining the necessity of phenyl ring π-character in warfarin

Xing, Hui,Houston, Sevan D.,Chen, Xuejie,Jin, Da-Yun,Savage, G. Paul,Tie, Jian-Ke,Williams, Craig M.

supporting information, p. 1954 - 1956 (2019/06/04)

Despite the difficulty in administering a safe dose regimen and reports of emerging resistance, warfarin (1) remains the most widely-used oral anticoagulant for the prevention and treatment of thrombosis in humans globally. Systematic substitution of the warfarin phenyl ring with either 1,3,5,7-cyclooctatetraene (COT) (2), cubane (3), cyclohexane (4) or cyclooctane (5) and subsequent evaluation against the target enzyme, vitamin K epoxide reductase (VKOR), facilitated interrogation of both steric and electronic properties of the phenyl pharmacophore. The tolerance of VKOR to further functional group modification (carboxylate 14, PTAD adduct 15) was also investigated. The results demonstrate the importance of both annulene conferred π-interactions and ring size in the activity of warfarin.

Multicatalytic Stereoselective Synthesis of Highly Substituted Alkenes by Sequential Isomerization/Cross-Coupling Reactions

Romano, Ciro,Mazet, Clément

supporting information, p. 4743 - 4750 (2018/04/10)

Starting from readily available alkenyl methyl ethers, the stereoselective preparation of highly substituted alkenes by two complementary multicatalytic sequential isomerization/cross-coupling sequences is described. Both elementary steps of these sequences are challenging processes when considered independently. A cationic iridium catalyst was identified for the stereoselective isomerization of allyl methyl ethers and was found to be compatible with a nickel catalyst for the subsequent cross-coupling of the in situ generated methyl vinyl ethers with various Grignard reagents. The method is compatible with sensitive functional groups and a multitude of olefinic substitution patterns to deliver products with high control of the newly generated C=C bond. A highly enantioselective variant of this [Ir/Ni] sequence has been established using a chiral iridium precatalyst. A complementary [Pd/Ni] catalytic sequence has been optimized for alkenyl methyl ethers with a remote C=C bond. The final alkenes were isolated with a lower level of stereocontrol. Upon proper choice of the Grignard reagent, we demonstrated that C(sp2) - C(sp2) and C(sp2) - C(sp3) bonds can be constructed with both systems delivering products that would be difficult to access by conventional methods.

Poly(N-isopropylacrylamide-co-l-proline)-catalyzed Claisen-Schmidt and Knoevenagel condensations: Unexpected enhanced catalytic activity of the polymer catalyst

Zhang, Hao,Han, Mengting,Chen, Tian,Xu, Lin,Yu, Lei

, p. 48214 - 48221 (2017/11/03)

The polymer catalyst is more effective than the corresponding monomer catalyst? Yes! The proline-modified polymer, poly(N-isopropylacrylamide-co-l-proline), was unexpectedly found to be more effective than the corresponding monomer l-proline catalyst in Claisen-Schmidt and Knoevenagel condensation reactions. 1H NMR, GC analysis and control reactions revealed that this abnormal phenomenon might be attributed to an enhanced concentration of the reactant on the surface of the polymer catalyst, which might be due to adsorption of the reactants to the polymer through hydrogen-bonding of the proline moiety with the reactants. This new polymer catalyst was so robust that it could be reused at least 10 times without deactivation. The polymer-catalyzed method was rather tolerant of substrates bearing sensitive groups that are usually incompatible with conventional acid- or base-catalyzed methods, reducing the protection-deprotection steps of the substrates.

Copper-catalyzed retro-aldol reaction of β-hydroxy ketones or nitriles with aldehydes: Chemo- and stereoselective access to (E)-enones and (E)-acrylonitriles

Zhang, Song-Lin,Deng, Zhu-Qin

, p. 7282 - 7294 (2016/08/05)

A copper-catalyzed transfer aldol type reaction of β-hydroxy ketones or nitriles with aldehydes is reported, which enables chemo- and stereoselective access to (E)-α,β-unsaturated ketones and (E)-acrylonitriles. A key step of the in situ copper(i)-promoted retro-aldol reaction of β-hydroxy ketones or nitriles is proposed to generate a reactive Cu(i) enolate or cyanomethyl intermediate, which undergoes ensuing aldol condensation with aldehydes to deliver the products. This reaction uses 1.2 mol% Cu(IPr)Cl (IPr denotes 1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene) as the catalyst in the presence of 6.0 mol% NaOtBu cocatalyst at room temperature or 70 °C. A range of aryl and heteroaryl aldehydes as well as acrylaldehydes are compatible with many useful functional groups being tolerated. Under the mild and weakly basic conditions, competitive Cannizzaro-type reaction of benzaldehydes and side reactions of base-sensitive functional groups can be effectively suppressed, which show synthetic advantages of this reaction compared to classic aldol reactions. The synthetic potential of this reaction is further demonstrated by the one-step synthesis of biologically active quinolines and 1,8-naphthyridine in excellent yields (up to 91%). Finally, a full catalytic cycle for this reaction has been constructed using DFT computational studies in the context of a retro-aldol/aldol two-stage mechanism. A rather flat reaction energy profile is found indicating that both stages are kinetically facile, which is consistent with the mild reaction conditions.

Design, synthesis and biological evaluation of novel C3-functionalized oxindoles as potential Pim-1 kinase inhibitors

Sun, Hong-Bao,Wang, Xiao-Yan,Li, Guo-Bo,Zhang, Li-Dan,Liu, Jie,Zhao, Li-Feng

, p. 29456 - 29466 (2015/04/14)

A novel series of C3-functionalized oxindoles, 3-(2-oxo-4-phenylbut-3-en-1-ylidene)indolin-2-ones, were designed, synthesized and investigated for inhibition of cell proliferation against different types of human cancer cell lines, including SW620, HeLa and A549. This biological study showed that these compounds containing the scaffolds of indole and aromatic α,β-unsaturated ketone had moderate to significant antitumor activities. Further study suggested that compound 4b, as one of this kind of structure derivative, showed broad-spectrum antitumor activities against MCF-7, PC-3, SKOV-3, U87, SMMC-7721, SY5Y and A875 cancer cell lines. Besides, the results of the inhibition of Pim kinases indicated that compound 4b showed selective and efficient anti-Pim-1 kinase activity (IC50 = 5 μM). Docking simulation, flow cytometry (FCM), and Hoechst 33342 staining assay suggested that the most active compound 4b induced cell death through apoptosis via binding to the active ATP pocket of Pim-1. Moreover, it showed that compound 4b had strong inhibition of tubulin polymerization which may be caused by inhibiting Pim-1. This journal is

Asymmetric Catalysis with Ethylene. Synthesis of Functionalized Chiral Enolates

Biswas, Souvagya,Page, Jordan P.,Dewese, Kendra R.,RajanBabu

, p. 14268 - 14271 (2015/12/01)

Trialkylsilyl enol ethers are versatile intermediates often used as enolate surrogates for the synthesis of carbonyl compounds. Yet there are no reports of broadly applicable, catalytic methods for the synthesis of chiral silyl enol ethers carrying latent functionalities useful for synthetic operations beyond the many possible reactions of the silyl enol ether moiety itself. Here we report a general procedure for highly catalytic (substrate:catalyst ratio up to 1000:1) and enantioselective (92% to 98% major enantiomer) synthesis of such compounds bearing a vinyl group at a chiral carbon at the β-position. The reactions, run under ambient conditions, use trialkylsiloxy-1,3-dienes and ethylene (1 atm) as precursors and readily available (bis-phosphine)-cobalt(II) complexes as catalysts. The silyl enolates can be readily converted into novel enantiopure vinyl triflates, a class of highly versatile cross-coupling reagents, enabling the syntheses of other enantiomerically pure, stereodefined trisubstituted alkene intermediates not easily accessible by current methods. Examples of Kumada, Stille, and Suzuki coupling reactions are illustrated.

PPh3·HBr-DMSO mediated expedient synthesis of γ-substituted β,γ-unsaturated α-ketomethylthioesters and α-bromo enals: Application to the synthesis of 2-methylsulfanyl-3(2 H)-furanones

Mal, Kanchan,Sharma, Abhinandan,Maulik, Prakas R.,Das, Indrajit

supporting information, p. 662 - 667 (2014/01/23)

An efficient chemoselective general procedure for the synthesis of γ-substituted β,γ-unsaturated α-ketomethylthioesters from α,β-unsaturated ketones has been achieved through an unprecedented PPh3·HBr-DMSO mediated oxidative bromination and Kornblum oxidation sequence. The newly developed reagent system serves admirably for the synthesis of α-bromoenals from enals. Furthermore, AuCl 3-catalyzed efficient access to 3(2H)-furanones from the above intermediates under extremely mild conditions are described. Copyright

Post a RFQ

Enter 15 to 2000 letters.Word count: 0 letters

Attach files(File Format: Jpeg, Jpg, Gif, Png, PDF, PPT, Zip, Rar,Word or Excel Maximum File Size: 3MB)

1 Customer Service

What can I do for you?
Get Best Price

Get Best Price for 41437-84-7