58443-83-7Relevant articles and documents
UiO-66 microcrystals catalyzed direct arylation of enol acetates and heteroarenes with aryl diazonium salts in water
Sun, Zhong-Hua,Chen, Wang,Qian, Bing-Bing,Wang, Liang,Yu, Binxun,Chen, Qun,He, Ming-Yang,Zhang, Zhi-Hui
, (2020/01/25)
UiO-66 is a classic Metal–organic framework (MOF) that constructed by zirconium cations and terephthalate with high chemical and thermal stability. Using pristine UiO-66 nanocrystals as the catalysts, the carbon–carbon bond formation based on denitrogenat
C-H arylation reactions through aniline activation catalysed by a PANI-g-C3N4-TiO2 composite under visible light in aqueous medium
Wang, Liang,Shen, Jun,Yang, Sen,Liu, Wenjie,Chen, Qun,He, Mingyang
supporting information, p. 1290 - 1296 (2018/03/26)
A PANI (polyaniline)-g-C3N4-TiO2 composite was prepared and found to be efficient for radical C-H arylation reactions. The arylation process involved coupling of in situ generated aryl diazonium salts from aniline with heteroarenes, enol acetates or benzoquinones under visible light in aqueous medium or pure water. A broad range of substrates survived the reaction conditions to provide the desired products in moderate to good yields. Scale-up (10 mmol) synthesis was also achieved. This semiconductor photocatalyst showed good photocatalytic performance and stability. Recycle studies showed that this composite could be readily recovered and a slight decrease in the catalytic activity was observed after ten consecutive runs.
Salicylic Acid-Catalyzed Arylation of Enol Acetates with Anilines
Felipe-Blanco, Diego,Gonzalez-Gomez, Jose C.
supporting information, p. 2773 - 2778 (2018/07/29)
α-Aryl ketones are both structure moieties commonly found in bioactive compounds and versatile synthetic intermediates for the preparation of drug-like molecules. An operationally simple and scalable protocol has been developed to prepare α-aryl ketones from readily available aromatic amines and enol acetates (or silyl enol ethers). This metal-free methodology features the use of salicylic acid as a convenient catalyst to promote the formation of aryl radicals from in-situ generated aryl diazonium salts, without demanding thermal or photochemical activation. The mild reaction conditions used are compatible with anilines substituted with diverse functionalities. Structural elaboration of some prepared α-aryl ketones was accomplished to illustrate their usefulness as building blocks. (Figure presented.).
C-C Activation by Retro-Aldol Reaction of Two β-Hydroxy Carbonyl Compounds: Synergy with Pd-Catalyzed Cross-Coupling to Access Mono-α-arylated Ketones and Esters
Zhang, Song-Lin,Yu, Ze-Long
, p. 57 - 65 (2016/01/15)
A retro-aldol reaction of two β-hydroxy compounds in synergy with Pd-catalyzed cross-coupling of aryl halides is reported herein, which produces selectively mono-α-arylated ketones and esters in good yields. This reaction is compatible with a broad range of aryl iodides, bromides, chlorides, and triflates and can tolerate an array of functional groups on the aromatic ring. Ready scale-up of this reaction to gram level is applicable without an appreciable decrease in the reaction yield. Furthermore, concise syntheses of biologically active isocoumarin and indole derivatives have been achieved to greatly demonstrate the synthetic value of this retro-aldol reaction. Finally, the reaction mechanism has been discussed on the basis of experimental observations and DFT computational results. A regulated six-membered-ring transition structure has been located for the key retro-aldol C-C cleavage, which constitutes the rate-determining step of a full catalytic cycle. The concept of C-C activation by retro-aldol reaction may also find applications in other fundamental reactions.
Design of an Indolylphosphine Ligand for Reductive Elimination-Demanding Monoarylation of Acetone Using Aryl Chlorides
Fu, Wai Chung,So, Chau Ming,Chow, Wing Kin,Yuen, On Ying,Kwong, Fuk Yee
supporting information, p. 4612 - 4615 (2015/09/28)
The rational design of a phosphine ligand for the reductive elimination-demanding Pd-catalyzed mono-α-arylation of acetone is demonstrated and reported. The catalyst is tolerant of previously proven challenging electron-deficient aryl chlorides and provides excellent product yields with down to 0.1 mol % Pd. Preliminary investigations suggest that the rate-limiting step for the proposed system is the oxidative addition of aryl chlorides, in which it contradicts previous findings regarding the α-arylation of acetone with aryl halides.
Copper-catalyzed coupling of aryl iodides and tert-butyl keto esters: Efficient access to α-aryl ketones and α-arylacetic acid tert-butyl esters
Zhao, Duo,Jiang, Yongwen,Ma, Dawei
, p. 3327 - 3332 (2014/05/06)
CuI/trans-4-hydroxy-l-proline catalyzed coupling of aryl iodides with tert-butyl keto esters proceeded smoothly at 40 °C in DMF, providing α-aryl ketones after acid-promoted deprotection and decarboxylation of tert-butyl ester group. While CuI/2-picolinic acid catalyzed coupling of aryl iodides with tert-butyl acetoacetate at 70 °C in dioxane delivered α-arylacetic acid tert-butyl esters upon spontaneous deacylation. A wide range of functional groups, such as acetyl, methoxy, nitrile, nitro, bromo, and chloro were compatible with the reaction conditions.
Superparamagnetic copper ferrite nanoparticles as an efficient heterogeneous catalyst for the α-arylation of 1,3-diketones with C-C cleavage
Nguyen, Anh T.,Nguyen, Lan T. M.,Nguyen, Chung K.,Truong, Thanh,Phan, Nam T. S.
, p. 815 - 823 (2014/03/21)
Superparamagnetic CuFe2O4 nanoparticles were synthesized from CuCl2 and FeCl3 by a co-precipitation method in ethylene glycol and characterized by several techniques, which included vibrating sample magnetometry, XRD, SEM, TEM, atomic absorption spectrometry, and nitrogen physisorption measurements. The CuFe 2O4 nanoparticles could be used as a solid catalyst for the α-arylation reaction of acetylacetone with iodobenzene to form phenylacetone as the principal product and 3-phenyl-2,4-pentanedione as the byproduct. The reaction that used the CuFe2O4 nanoparticles as catalyst could proceed to completion with 95 % selectivity to phenylacetone. The CuFe2O4 nanoparticles could be separated easily from the reaction mixture by magnetic decantation and could be reused several times for the α-arylation reaction without a significant degradation in catalytic activity. Magnetic attraction: Superparamagnetic CuFe2O4 nanoparticles are synthesized from CuCl 2 and FeCl3 by a co-precipitation method. The CuFe 2O4 nanoparticles are used as a solid catalyst for the α-arylation reaction of acetylacetone with iodobenzene to form phenylacetone as the principal product and 3-phenyl-2,4-pentanedione as the byproduct.
Zheda-phos for general α-monoarylation of acetone with aryl chlorides
Li, Pengbin,Lue, Bo,Fu, Chunling,Ma, Shengming
supporting information, p. 1255 - 1259 (2013/06/27)
A new, readily available, and air-stable monophosphine ligand, i.e., Zheda-Phos, has been developed for the general and highly effective palladium-catalyzed monoarylation of acetone with aryl chlorides. The reaction rate is of first-order dependence with the aryl chloride. Copyright
Palladium-catalyzed mono-α-arylation of acetone with aryl imidazolylsulfonates
Ackermann, Lutz,Mehta, Vaibhav P.
supporting information; experimental part, p. 10230 - 10233 (2012/09/22)
Set the ace(tone): A palladium catalyst derived from the bidentate XantPhos ligand and Pd(OAc)2 has enabled broadly applicable mono-α-arylations of acetone to be performed with air- and moisture-stable aryl imidazolylsulfonates as most user-friendly electrophiles (see scheme). Copyright
Heck reactions of α- or β-substituted enol ethers with aryl bromides catalysed by a tetraphosphane/palladium complex - Direct access to acetophenone or 1-arylpropanone derivatives
Battace, Ahmed,Feuerstein, Marie,Lemhadri, Mhamed,Zair, Touriya,Doucet, Henri,Santelli, Maurice
, p. 3122 - 3132 (2008/02/08)
cis,cis,cis-1,2,3,4-Tetrakis(diphenylphosphanylmethyl)cyclopentane/ [PdCl(C3H5)]2 efficiently catalyses the Heck reaction of α- and β-substituted enol ethers with aryl bromides. The arylation of 1-phenyl-1-(trimethylsilyloxy) ethylene led directly to the 2-aryl-1-phenylethanones. Similar reaction rates were observed with electron-rich, electron-deficient or sterically congested aryl bromides. Heck reaction with benzyl isopropenyl ether gave a mixture of isomers. However, this mixture gave selectively the 1-arylpropanones after hydrolysis. Employing β-methoxystyrene, 3-ethoxyacrylonitrile or methyl 3-methoxyacrylate, the regioselective α-arylation of these enol ethers was observed in all cases, but mixtures of (Z) and (E) isomers were generally obtained, which in many cases yielded a single ketone product after acid treatment. The stereoselectivity of this reaction depends on steric and electronic factors, and better stereoselectivities in favour of (Z) isomers were observed with electron-rich or sterically congested aryl bromides. Higher yields were obtained for this reaction with electron-rich or sterically congested aryl bromides than with electron-poor aryl bromides. These observations suggest that the rate-limiting step of the catalytic cycle is not the oxidative addition of the aryl bromide to the palladium complex with these substituted enol ethers. Wiley-VCH Verlag GmbH & Co. KGaA, 2007.
