73257-49-5Relevant articles and documents
g-C3N4@Ce-MOF Z-scheme heterojunction photocatalyzed cascade aerobic oxidative functionalization of styrene
Karimia, Meghdad,Sadeghia, Samira,Gavinehroudi, Reza Ghahremani,Mohebali, Haleh,Mahjoub, Alireza,Heydari, Akbar
, p. 6671 - 6681 (2021/04/22)
A special composite of the cerium-based metal-organic framework (Ce-UiO-66) modified with graphitic carbon nitride nanosheets (g-C3N4) has been synthesized. In order to make a comparison, a series of composites comprising g-C3N4and Ce-MOF were synthesized as well. Their structural features were investigated using Fourier transform infrared spectroscopy (FT-IR), powder X-ray diffraction (PXRD), sorption of nitrogen (BET and BJH), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), energy dispersive X-ray (EDX), transmission electron microscopy (TEM), X-ray fluorescence spectroscopy (XRF) and diffuse reflectance UV-Vis spectroscopy (UV-Vis DRS) and electron spin resonance (ESR) techniques. According to the obtained results, it was found that nanosheets of mesoporous g-C3N4act as linkers between the cerium sites, playing a critical role in the formation of composites. In fact, the embedded g-C3N4nanoparticles in the Ce-MOF cause a new kind of meso-porosity. Moreover, the coordination of nitrogen atoms in the graphitic carbon nitride structure to cerium atoms of the crystal brings about substantial changes in the optical properties, increasing the photoreactivity. On the other hand, since there is a physical contact between Ce-UiO-66 and g-C3N4in the composite, the unaltered pore volume and optical properties lead to the formation of a physical mixture rather than a composite. The g-C3N4@Ce-MOF as a photocatalyst was employed in photocatalytic aerobic oxidative Hantzsch pyridine synthesis of styrene and indicated high performance under visible light. The stability and reusability of g-C3N4@Ce-MOF were also examined and showed high efficiency up to the 5th run. Besides, the PXRD and FT-IR analyses taken from the retrieved g-C3N4@Ce-MOF nanocomposite confirmed the catalyst stability after the completion of the cascade aerobic oxidative reaction. Despite the photocatalytic performance, the synergistic effect of open metal sites in the MOF as Lewis acid and nitrogen in g-C3N4have greatly improved the efficiency of the catalyst. Moreover, the study of the reaction mechanism using ESR indicates the positive effect of composite formation on the performance of the photocatalytic aerobic oxidation reaction by the superoxide radical (O2˙—), as a selective oxidant species.
Ferric Sulfasalazine Sulfa Drug Complex Supported on Cobalt Ferrite Cellulose; Evaluation of Its Activity in MCRs
Rostamizadeh, Shahnaz,Daneshfar, Zahra,Khazaei, Ali
, p. 2091 - 2114 (2020/01/31)
Abstract: The green and nano catalyst was simply prepared through the reaction of ferric sulfasalazine with nanomaterial CoFe2O4-cellulose as a magnetic biopolymer surface. This novel heterogeneous organometallic catalyst was charact
Green synthesis and characterization of novel Mn-MOFs with catalytic and antibacterial potentials
Aryanejad, Sima,Bagherzade, Ghodsieh,Moudi, Maryam
, p. 1508 - 1516 (2020/02/06)
This study focused on the synthesis of a new manganese-based metal-organic framework and the investigation of its application aspects. A Mn-MOF nanostructure, namely UoB-4, was prepared using a Schiff base organic linker (H2bbda: 4,4′-[benzene-
[Fesipmim]Cl as highly efficient and reusable catalyst for solventless synthesis of dihydropyridine derivatives through Hantzsch reaction
Agrwal, Akansha,Kasana, Virendra
, (2020/06/01)
Abstract: In the present investigation, magnetic ferrite nanoparticles (ferrite NPs) were synthesized and coated with silica (ferrite?SiO2NPs) by using the sol-gel method. After that, silica propylmethylimidazolium chloride ionic liquid [Sipmim]Cl was prepared and linked with the above-prepared ferrite?SiO2NPs to synthesize ferrite silica propylmethylimidazolium chloride [Fesipmim]Cl catalyst. The formation of [Fesipmim]Cl catalyst was confirmed by Fourier-transform infrared (FT-IR) spectroscopy analysis. X-ray diffraction (XRD) analysis confirmed the structure of ferrite NPs and ferrite?SiO2 NPs. Transmission electron microscopy (TEM) evidenced the successful formation of ferrite NPs and ferrite?SiO2 NPs. Scanning electron microscopy (SEM) results revealed the change in morphology of ferrite NPs, ferrite?SiO2NPs and [Fesipmim]Cl. The magnetic properties of [Fesipmim]Cl catalyst were measured by vibrating sample magnetometer (VSM). The efficiency of the [Fesipmim]Cl catalyst was checked by using it for the synthesis of different derivatives of dihydropyridine through Hantzsch reaction via a three-component coupling reaction of substituted benzaldehydes, ethyl/ methyl acetoacetate and ammonium acetate. The formation and structures of all the synthesized compounds were confirmed by FT-IR, 1HNMR, 13C NMR spectral analyses. The reusability of the catalyst [Fesipmim]Cl was checked up to seven cycles and found to have excellent activity up to five cycles. Graphic abstract: [Figure not available: see fulltext.].
CoFe2O4@SiO2-NH2-CoII NPs catalyzed Hantzsch reaction as an efficient, reusable catalyst for the facile, green, one-pot synthesis of novel functionalized 1,4-dihydropyridine derivatives
Allahresani, Ali,Mohammadpour Sangani, Mehri,Nasseri, Mohammad Ali
, (2020/07/06)
A magnetically heterogeneous CoFe2O4@SiO2-NH2-CoII nanoparticle was synthesized by the immobilization of Co (II) complex onto CoFe2O4@SiO2 nanoparticles, and the heterogeneous magnetic nanocatalyst was characterized by XRD, TEM, TGA, EDX, and FT-IR techniques. Then, the green and reusable method was introduced for a multicomponent synthesis of 1,4-dihydropyridine derivatives via Hantszch reaction. The synthesis of 1,4-dihydropyridine derivatives was proceeded by the reaction of aldehyde, ethyl acetoacetate, and ammonium acetate in the presence of this magnetic nanocatalyst in EtOH/Water (1:1). Simple work-up, short reaction times, excellent yields (60–96percent) as well as green solvent are some advantages of this novel approach, and the corresponding products were purified with no need for chromatographic separation.
Preparation method and application of novel ionic beta-naphthol aldehyde Schiff base zirconium complex
-
Paragraph 0041; 0066-0067, (2019/12/02)
The invention belongs to the technical field of catalytic organic synthesis, and particularly relates to a preparation method and application of a novel ionic beta-naphthol aldehyde Schiff base zirconium complex. Zirconium atoms are coordinated with a beta-naphthol aldehyde Schiff base ligand and water molecules, and two perfluoroalkyl (aryl) sulfonic acid groups are combined with central atom zirconium through covalent bonds and ionic bonds respectively. The preparation method comprises the following steps: dissolving beta-naphthol aldehyde Schiff base zirconium dichloride in a solvent, adding a silver salt under the protection of N2, reacting the mixture for 1-4 hours in a dark place at room temperature, performing filtration, adding n-hexane into filtrate until layering, putting the solution into a refrigerator, and freezing the solution for 24 hours to separate out the beta-naphthol aldehyde Schiff base zirconium complex. The beta-naphthol aldehyde Schiff base zirconium complex hashigh air stability and strong Lewis acidity, and can efficiently catalyze the Hantzsch reaction of aldehyde, beta-ketoester and ammonium acetate to synthesize 1,4-dihydropyridine derivatives.
Synergistic catalytic effect between ultrasound waves and pyrimidine-2,4-diamine-functionalized magnetic nanoparticles: Applied for synthesis of 1,4-dihydropyridine pharmaceutical derivatives
Taheri-Ledari, Reza,Rahimi, Jamal,Maleki, Ali
, (2019/09/03)
A convenient strategy for synthesis of the various derivatives of 1,4-dihydropyridine (1,4-DHP), as one of the most important pharmaceutical compounds, is presented in this study. For this purpose, firstly, magnetic iron oxide nanoparticles (Fe3O4 NPs) were fabricated and suitably coated by silica network (SiO2) and trimethoxy vinylsilane (TMVS). Then, their surfaces were well functionalized with pyrimidine-2,4-diamine (PDA) as the main active sites for catalyzing the synthesis reactions. In this regard, the performance of three different methods including reflux, microwave (MW) and ultrasound wave (USW) irradiations have been comparatively monitored via studying various analyses on the fabricated nanocatalyst (Fe3O4/SiO2-PDA). Concisely, high efficiency of the USW irradiation (in an ultrasound cleaning bath with a frequency of 50 kHz and power of 250 W/L) has been well proven through the investigation of the main factors such as excellent surface-functionalization, core/shell structure conservation, particle uniformity, close size distribution of the particles, and great inhibition of the particle aggregation. Then, the effectiveness of the USW irradiation as a promising co-catalyst agent has been clearly demonstrated in the 1,4-DHP synthesis reactions. It has been concluded that the USW could provide more appropriate conditions for activation of the catalytic sites of Fe3O4/SiO2-PDA NPs. However, high reaction yields (89%) have been obtained in the short reaction times (10 min) due to the substantial synergistic effect between the presented nanocatalyst and USW.
The efficient synthesis of Hantzsch 1,4-dihydropyridines via metal-free oxidative C–C coupling by HBr and DMSO
Rezaei, Narjes,Ranjbar, Parviz Rashidi
, p. 4102 - 4106 (2018/10/20)
A novel and efficient synthesis of Hantzsch 1,4-dihydropyridines through metal-free oxidative C–C coupling process was described. The reaction between benzylic alcohols, 1,3-dicarbonyl compounds and ammonium hydroxide in the presence of HBr in DMSO at 75 °C led to afford 1,4-dihydropyridine in excellent yields. This protocol introduces the use of benzyl alcohols instead of aldehydes as a new modification of the Hantzsch reaction.
Synthesis and application of chitosan supported vanadium oxo in the synthesis of 1,4-dihydropyridines and 2,4,6-triarylpyridines: Via anomeric based oxidation
Safaiee, Maliheh,Ebrahimghasri, Bahar,Zolfigol, Mohammad Ali,Baghery, Saeed,Khoshnood, Abbas,Alonso, Diego A.
, p. 12539 - 12548 (2018/08/04)
Chitosan, as a biopolymer, exhibits a strong affinity for complexation with suitable metal ions. Thus, it has received increased attention for the preparation of stable bioorganic-inorganic hybrid heterogeneous catalysts. Herein, a novel chitosan based vanadium oxo (ChVO) catalyst was prepared and fully characterized by several techniques such as Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), thermal gravimetric analysis (TGA), derivative thermal gravimetric (DTG), differential thermal analysis (DTA), scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDX), high-resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED), X-ray photoelectron spectroscopy (XPS) and inductively coupled plasma mass spectrometry (ICP-MS). The synthesized catalyst has been successfully used as a reusable catalyst in the synthesis of dihydropyridines and triarylpyridines.
Method for synthesizing 1,4-dihydropyridines derivatives
-
Paragraph 0114; 0115, (2017/10/27)
The invention relates to a method for synthesizing 1,4-dihydropyridines derivatives. According to the method, a fluorescence-marked nonmetal organic boron-nitrogen lewis acid-alkali dual-functional complex is used as a catalyst, so that the pollution of heavy metals is effectively avoided; the catalyst can be recycled, and a residual amount of the catalyst in a product can be rapidly detected; and the source of raw materials is wide, the target yield is close to 100 percent, the reaction process is a homogenous reaction, and a product is obtained by virtue of chromatographic separation. The whole reaction system can be directly amplified, and the industrialization prospect is significant.
