Cost reduction possibilities of vanadium-based solid solutions – Microstructural, thermodynamic, cyclic and environmental effects of ferrovanadium substitution

Add time:07/22/2019    Source:sciencedirect.com

Microstructural changes, thermodynamic and cyclic properties, total material cost and the cumulative energy demand of V(40−40·x)Fe(8−8·x)Ti26Cr26(FeV)(48·x) with 0 ≤ x ≤ 0.9 using commercial ferrovanadium (FeV) are investigated. The substitution of V + Fe by FeV (x = 0.9) raises the equilibrium hydrogen pressure at 298 K from pa = 1 MPa to pa = 6 MPa during absorption of H2 and pd = 0.2 MPa and pd = 1 MPa during desorption. The reversible hydrogen storage capacity is determined after 50 pressure-swing cycles and is reduced from 2.2 mass% to 1.7 mass% for the unsubstituted alloy (x = 0) compared to 1.7 mass% to 1.3 mass% for the FeV substituted alloy (x = 0.9). This corresponds to a loss of capacity of approx. 23% for both samples. After taking into account the capacity loss caused by FeV substitution, the raw material cost per 100 kg of stored H is reduced to 1/3 of the original price of the unsubstituted alloy. The cumulative energy demand of pure V depends on the number of purification steps. Ferrovanadium shows a cumulative energy demand which is reduced at least by a factor of 1.4 as compared to high-purity vanadium.

We also recommend Trading Suppliers and Manufacturers of FERROVANADIUM ALLOY) (cas 11147-86-7). Pls Click Website Link as below: cas 11147-86-7 suppliers

Prev:Enhancement of cerium and hydrogen storage property of a low-cost Ti-V based BCC alloy prepared by commercial ferrovanadium
Next:Hydrogen occlusion behaviors of ZrVFe alloys under mild hydrogen pressures and lowering of their hydrogen desorption temperatures)