Impact of Zener-Hollomon parameter on substructure and texture evolution during thermomechanical treatment of iron-containing wrought aluminium alloys

Add time:07/22/2019    Source:sciencedirect.com

The objective of the investigation is to evaluate the influence of the Zener-Hollomon parameter on substructure and texture evolution in iron-containing wrought aluminium alloys (type AA8011). Methods applied are X-ray texture analysis, electron backscatter diffraction (EBSD) and optical microscopy. The results show a serious impact of the Zener-Hollomon parameter on cube texture evolution during the thermomechanical treatment in iron-containing aluminium alloys. An increase in the Zener-Hollomon parameter reduces the survivability of cube texture during hot deformation and reinforces particle-stimulated nucleation (PSN) during the annealing process. However, thermomechanical treatment at low temperatures leads to active precipitation and as a result fine-dispersed participles tend to block all nuclei except for those producing large cube-oriented grains. It is concluded that in iron-containing wrought aluminium alloys, the general correlation between the Zener-Hollomon parameter and subgrain size is similar to that observed in 3xxx series alloys and can be described by the specific set of equations derived.

We also recommend Trading Suppliers and Manufacturers of aluminium, compound with iron (1:3) (cas 12003-42-8). Pls Click Website Link as below: cas 12003-42-8 suppliers

Prev:Fractionation and identification of iron-phosphorus compounds in sewage sludge
Next:p-Arsanilic acid degradation and arsenic immobilization by a disilicate-assisted iron/aluminum electrolysis process)