In-situ elongated aluminium borate grains toughening WC- 1.87 wt % Al2O3- 4.13 wt % ZrO2 composite via spark plasma sintering

Add time:07/24/2019    Source:sciencedirect.com

In this work, a novel way was developed to facilitate the sintering of a binderless cemented carbide with Al2O3 contain while improving its toughness. WC- 1.87 wt % Al2O3- 4.13 wt %ZrO2 cemented carbides with 1 wt % B2O3 as additives were consolidated by high energy ball-milling and spark plasma sintering the as-milled composite powders. The effects of 1 wt % B2O3 content on the sintering behaviour, microstructure and mechanical properties of the obtained cemented carbides were investigated. The presence of B2O3 significantly lowers the sintering temperature by forming liquid phase and react with Al2O3 which contributed to obtaining fully dense specimens at 1350 °C and maintains fine grain sizes of WC until the temperature exceeding 1450 °C. The sintering temperature of the specimens with optimum mechanical properties has been also reduced comparing that of the original WC- 1.87 wt % Al2O3- 4.13 wt %ZrO2 cemented carbides. Furthermore, the addition of B2O3 triggered the reaction between B2O3 and Al2O3 resulting in forming in-situ elongated aluminium borate grains (A4B2O9 and A18B4O33 whiskers), which promoted the toughness. The specimens sintered at 1450 °C exhibited optimal mechanical properties: the Vickers hardness and fracture toughness were 19.26 GPa and 11.49 MPa m1/2, respectively.

We also recommend Trading Suppliers and Manufacturers of Aluminum borate oxide (cas 12005-61-7). Pls Click Website Link as below: cas 12005-61-7 suppliers

Prev:Structural and optical properties of cerium oxide doped barium bismuth borate glasses
Next:Borate-assisted liquid-phase selective oxidation of n-pentane)