Enhancing oxidative capability of Ferrate(VI) for oxidative destruction of phenol in water through intercalation of Ferrate(VI) into layered double hydroxide
-
Add time:07/20/2019 Source:sciencedirect.com
In this study, ferrate intercalated Ca/Al-layered double hydroxide (Ferrate-LDH) was synthesized and characterized for water treatment. In the new Ferrate(VI) material, ferrate was stably present in the LDH interlayers, in agreement with results of the Density Functional Theory simulation. The oxidative capability of Ferrate-LDH was examined in terms of the mineralization of phenol in water. The Ferrate-LDH could achieve up to 86.8% utilization efficiency during oxidative destruction of phenol in water (pH = 6.5, TOC = 38.3 mg/L), advantageous over direct ferrate addition that only achieved 12.6% utilization efficiency. A slower evolution of dioxygen (a final product of Ferrate(VI) self-decay) was observed in the Ferrate-LDH water system, suggesting that the LDH structure inhibited Ferrate(VI) self-decay. Therefore, the better phenol removal achieved by Ferrate-LDH was likely ascribed to an increased oxidant exposure caused by the increased lifetime of Fe(VI) in water. Characterization of the LDH products before and after oxidation of phenol revealed that ferric (hydr)oxides capable of surface catalyzing Ferrate(VI) self-decay were formed on the LDH surface, not inside the LDH interlayers, suggesting that ferric(III), the product of Fe(VI) reduction, was repelled from the LDH interlayers. Isolation of Fe(VI) present in the LDH structure from these active iron products may be responsible for the inhibited Ferrate(VI) self-decay when Ferrate-LDH was dosed to water. This study demonstrates that the intercalation of ferrate in LDH represents a promising approach to more efficiently and economically utilizing Ferrate(VI) for the elimination of water pollutants.
We also recommend Trading Suppliers and Manufacturers of ferrate ion (cas 16836-06-9). Pls Click Website Link as below: cas 16836-06-9 suppliers
Prev:Characterization of acid–base and complexation properties of cellulose degradation products using capillary electrophoresis
Next:Impact of inorganic ions and natural organic matter on arsenates removal by ferrate(VI): Understanding a complex effect of phosphates ions) - 【Back】【Close 】【Print】【Add to favorite 】
- Related Information
- Evaluation of flurbiprofen removal from aqueous solution by electrosynthesized ferrate(VI) ion and electrocoagulation process07/30/2019
- Degradation of tetrabromobisphenol A by ferrate(VI) oxidation: Performance, inorganic and organic products, pathway and toxicity control07/29/2019
- Comparative study on ferrate oxidation of BPS and BPAF: Kinetics, reaction mechanism, and the improvement on their biodegradability07/28/2019
- A simple treatment method for phenylarsenic compounds: Oxidation by ferrate (VI) and simultaneous removal of the arsenate released with in situ formed Fe(III) oxide-hydroxide07/27/2019
- Kinetics and mechanism of the oxidative degradation of parathion by Ferrate(VI)07/26/2019
- Comparison of ferrate and ozone pre-oxidation on disinfection byproduct formation from chlorination and chloramination07/25/2019
- Strategy of combining radiation with ferrate oxidation for enhancing the degradation and mineralization of carbamazepine07/24/2019
- Ferrate oxidation of distinct naphthenic acids species isolated from process water of unconventional petroleum production07/23/2019
- Impact of inorganic ions and natural organic matter on arsenates removal by ferrate(VI): Understanding a complex effect of phosphates ions07/22/2019


