Preparation and characterization of 5-sulphosalicylic acid doped tetraethoxysilane composite ion-exchange material by sol–gel method
-
Add time:07/14/2019 Source:sciencedirect.com
In this manuscript, we report the preparation and characterization of sulphosalicylic doped tetraethoxysilane (SATEOS), composite material by sol–gel method as a new ion exchanger for the removal of Ni(II) from aqueous solution. The fine granular material was prepared by acid catalyzed condensation polymerization through sol–gel mechanism in the presence of cationic surfactant. The material has an ion exchange capacity of 0.64 mequiv./g(dry) for sodium ions, 0.60 mequiv./g(dry) for potassium ions, 1.84 mequiv./g(dry) for magnesium ions, 1.08 mequiv./g(dry) for calcium ions and 1.36 mequiv./g(dry) for strontium ions. Its X-ray diffraction studies suggest that it is crystalline in nature. The material has been characterized by SEM, IR, TGA and DTG so as to identify the various functional groups and ion exchange sites present in this material. Quantum chemical computations at DFT/B3LYP/6-311G (d,p) level on model systems were performed to substantiate the structural conclusions based ion instrumental techniques. Investigations into the elution behaviour, ion exchange reversibility and distribution capacities of this material towards certain environmentally hazardous metal ions are also performed. The material shows good chemical stability towards acidic conditions and exhibits fast elution of exchangeable H+ ions under neutral conditions. This material shows remarkable selectivity for Ni(II) and on the basis of its Kd value (4 × 102 in 0.01 M HClO4) some binary separations of Ni(II) from other metal ions are performed.
We also recommend Trading Suppliers and Manufacturers of Tetraethoxysilane(Si-28) (cas 78-10-4). Pls Click Website Link as below: cas 78-10-4 suppliers
Prev:Ignition delay times of shock-heated tetraethoxysilane, hexamethyldisiloxane, and titanium tetraisopropoxide
Next:Tetraethoxysilane as a new facilitative film-forming additive for the lithium-ion battery with LiMn2O4 cathode) - 【Back】【Close 】【Print】【Add to favorite 】
- Related Information
- Effect of tetraethoxysilane coating on the improvement of plasma treated polypropylene adhesion07/19/2019
- Modelling the flame synthesis of silica nanoparticles from tetraethoxysilane07/18/2019
- A novel sol-gel multi-layer approach for cotton fabric finishing by tetraethoxysilane precursor07/17/2019
- Characterization of sol–gel encapsulated lipase using tetraethoxysilane as precursor07/16/2019
- Tetraethoxysilane as a new facilitative film-forming additive for the lithium-ion battery with LiMn2O4 cathode07/15/2019
- Ignition delay times of shock-heated tetraethoxysilane, hexamethyldisiloxane, and titanium tetraisopropoxide07/13/2019
- Polymer/silica nanohybrids by means of tetraethoxysilane sol–gel condensation onto waterborne polyurethane particles07/12/2019
- Conformational analysis and vibrational spectroscopic studies of tetraethoxysilane and its hydrolysis products: A DFT prediction07/11/2019


